Elizabeth Arden Ceramide Overnight Firming Mask

Elizabeth Arden Ceramide Overnight Firming Mask
8.5
/ 10
Moisturizing
10.0 Humectancy icon Humectancy
7.0 Occlusivity icon Occlusivity
$$$$

Review

Results you may expect from using Elizabeth Arden Ceramide Overnight Firming Mask:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Elizabeth Arden Ceramide Overnight Firming Mask:

  • Intense moisturizing. It has a moisturizing rating of 8.5 out of 10.

How moisturizing is it?

Intensely moisturizing: Elizabeth Arden Ceramide Overnight Firming Mask has a moisturizing rating of 8.5 out of 10.

Is it more humectant or occlusive? Rather humectant. It has a maximum humectancy of 10 out of 10, primarily due to the substantial concentration of Glycerin (est. ≈4.0%) and Butylene Glycol (est. ≈2.0%), and a high occlusivity of 7.0 out of 10, mainly due to the significant content of Dimethicone (est. ≈6.0%) and Pentaerythrityl Tetraethylhexanoate (est. ≈3.0%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, Elizabeth Arden Ceramide Overnight Firming Mask has a zero anti-wrinkle rating.

It contains some ingredients marketed as effective in reducing wrinkles, specifically Biosaccharide Gum-4, Adenosine, Palmitoyl Tetrapeptide-7, Palmitoyl Tripeptide-1, and Retinyl Linoleate. However, the studies supporting the anti-wrinkle claims of these ingredients provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, these ingredients do not generate the anti-wrinkle rating.

Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, could deliver some anti-wrinkle effects through its moisturizing action.

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Ingredients

Est. % Ingredient Origin Functions
50
9
6
4
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:

Ratings

All humectants
12.9
4
2
1.5
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
All occlusives
14.0
6.0
3.0
2.5
1.3
0.3
0.3
0.3
0.3
Benchmark
20
Moisturizing rating
8.5
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 12.9 10
10.0
4
2
1.5
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Occlusivity All occlusives 14.0 20
7.0
6.0
3.0
2.5
1.3
0.3
0.3
0.3
0.3
Moisturizing rating
8.5
Ingredient Est. % Benchmark Humectancy
4
2
1.5
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
All humectants 12.9 10
10
All humectants
12.9
4
2
1.5
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
6
3
2.5
1.3
0.3
0.3
0.3
0.3
All occlusives 14.0 20
7.0
All occlusives
14.0
6.0
3.0
2.5
1.3
0.3
0.3
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
n/a
- 0.3 -
n/a
- 0.3 -
n/a
- 0.3 -
n/a
- 0.3 -
n/a
- 0.3 -
Total
0
Biosaccharide Gum-4
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Adenosine
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Palmitoyl Tetrapeptide-7
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Palmitoyl Tripeptide-1
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Retinyl Linoleate
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
0
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
0.3
0.3
All antioxidants 1.5 3 No
All antioxidants
1.5
Hydroxyacetophenone
0.3
Medicago Sativa (Alfalfa) Extract
0.3
Sodium Hyaluronate
0.3
Squalene
0.3
Tocopherol
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
0.3
All soothing 0.6 5 No
All soothing
0.6
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %50
Function
Origin
The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Isononyl Isononanoate
Est. %9
Function
Origin
An ester of a branched fatty acid with a branched fatty alcohol. It is an easily spreadable emollient that has a silky, dry, non-greasy feel on the skin.
Dimethicone
Est. %6
Function
Origin
The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Glycerin
Est. %4
Function
Origin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Pentaerythrityl Tetraethylhexanoate
Est. %3
Function
Origin
An occlusive moisturizer and emollient with a good lubricity that leaves behind a glossy sheen after application. It can also control viscosity by thickening skincare products and act as a binding agent to hold pressed powdered products together.
C10-18 Triglycerides
Est. %2.5
Function
Origin
An occlusive ingredient that helps lock in moisture. It provides a soft, smooth feel and melts at body temperature.
Butylene Glycol
Est. %2
Function
Origin
A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.
Pentylene Glycol
Est. %1.5
Function
Origin

A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent.

Butyrospermum Parkii (Shea) Butter
Est. %1.3
Function
Origin
A semi-solid, buttery fat extracted from the seeds of the Shea tree that is a wonderful occlusive and emollient ingredient mainly comprised of fatty acids. Shea butter contains a large amount of anti-inflammatory and antioxidant compounds.
Glyceryl Stearate
Est. %1
Function
Origin
An emollient and emulsifier typically derived from vegetable sources through a chemical reaction with glycerin. It provides stability, texture, and consistency to formulations. Its main function is to allow oil and water to mix.
PEG-100 Stearate
Est. %0.3
Function
Origin
This surfactant is more specifically classified as an emulsifier that produces oil-in-water emulsions. PEG-100 stearate can also be used as a cleansing agent.
Polyglyceryl-10 Pentastearate
Est. %0.3
Function
Origin
Description is coming soon
Polybutene
Est. %0.3
Function
Origin
A petro-based ingredient that thickens and hold products together.
Biosaccharide Gum-4
Est. %0.3
Function
Origin
A sugar-derived gel which forms a water-binding film on the skin’s surface. This film allegedly protects the skin from environmental stressors.
Behenyl Alcohol
Est. %0.3
Function
Origin
A fatty alcohol with emollient properties. It is used as a co-emulsifier and thickener and tends to result in a product with a smooth and creamy application texture.
Acetyl Tetrapeptide-2
Est. %0.3
Function
Origin

Description is coming soon

Adenosine
Est. %0.3
Function
Origin

A key molecule responsible for energy transportation, signaling, and enzyme activity. Adenosine is a popular anti-wrinkle ingredient, however, the key study about its anti-wrinkle efficacy (1) does not meet CreamScan Research Evaluation Standards as it is not double-blind.

Alanine
Est. %0.3
Function
Origin
A simple amino acid used in skincare as a humectant moisturizing ingredient. It is a part of the so-called Natural Moisturizing Factor, a complex mixture of free amino acids and other water-soluble compounds found in skin cells.
Algin
Est. %0.3
Function
Origin
A plant-based ingredient that can form gels when added to water, so it can thicken water-based products. Algin serves as a binding agent, where it helps hold the other ingredients in the product together and prevents them from separating.
Alpha-Glucan Oligosaccharide
Est. %0.3
Function
Origin
A sugar-derived ingredient thought to provide protective benefits to the skin's microbiome which keeps skin feeling and looking healthy.
Aminomethyl Propanol
Est. %0.3
Function
Origin
A synthetic ingredient that helps to adjust the pH of a product to make it less acidic.
Arginine
Est. %0.3
Function
Origin
A humectant amino acid used to attract water to the skin’s surface. It is a part of the skin's Natural Moisturizing Factor, a mixture of various compounds that keeps the skin’s surface well hydrated. Arginine can also be used as a pH adjuster.
Aspartic Acid
Est. %0.3
Function
Origin
A humectant moisturizing amino acid that is a part of the skin's Natural Moisturizing Factor. It helps to retain water on the skin’s surface and is slightly acidic, thereby helping to balance the pH of a skincare product.
Caprylic/Capric Triglyceride
Est. %0.3
Function
Origin
A natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss.
Caprylyl Glycol
Est. %0.3
Function
Origin
An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Carbomer
Est. %0.3
Function
Origin
A synthetic ingredient with the ability to gel water. When used in emulsions, such as lotions and creams, carbomer can also act as an emulsion stabilizer.
Ceramide EOP
Est. %0.3
Function
Origin
Formerly called Ceramide 1, this ingredient is a skin-identical wax-like lipid with an ultra-long fatty acid chain. It restores and stabilizes the skin’s lipid matrix and helps to treat dry and flaky skin, especially when combined with other ceramides.
Ceramide NP
Est. %0.3
Function
Origin
Also known as ceramide 3, it is the most common ceramide in our skin. It helps to restore the skin’s lipid barrier and alleviate the symptoms of dry and cracked skin. Research has shown that skin suffering from conditions such as AD lacks ceramides.
Ceramide AP
Est. %0.3
Function
Origin
Previously called Ceramide 6 II, Ceramide AP is one of the most common ceramides in the skin. Research has shown that dry, flaky skin has significantly less Ceramide AP. Its application helps to treat dry skin by restoring balance in the skin lipids.
Cholesterol
Est. %0.3
Function
Origin
An emollient and important barrier repairing lipid, effective when combined with fatty acids and ceramides. Around 25% of the skin’s lipid layer is made up of cholesterol and it is found in the membrane of every single cell in our body.
Citric Acid
Est. %0.3
Function
Origin
A gently exfoliating AHA that helps to remove the top layer of dead skin cells. In comparison to other AHAs, citric acid has been shown to be one of the least effective. It is also very commonly used as a stabilizing and pH-controlling agent.
Cocos Nucifera (Coconut) Oil
Est. %0.3
Function
Origin
A famous occlusive moisturizing and emollient oil. It is derived from coconuts and may give a product a lovely coconut scent. Coconut oil is listed as a common comedogenic ingredient by acne.org.
Commiphora Mukul Resin Extract
Est. %0.3
Function
Origin
A fragrant extract derived from the resin of a Northern Indian tree called Commiphora wightii. It has a sweet, honey-like scent and contains some rare anti-inflammatory compounds.
Dimethicone/Vinyl Dimethicone Crosspolymer
Est. %0.3
Function
Origin
This ingredient can refer to several kinds of dimethicone crosspolymers. Like other silicones, it makes products feel slippery and non-greasy but can also increase the thickness or improve the water-resistance of a formula.
Ethylhexylglycerin
Est. %0.3
Function
Origin
A preservative booster derived from glycerin. It is commonly paired with other preservatives to improve their efficacy. Ethylhexylglycerin is also a humectant due to its chemical base of glycerin.
Fucose
Est. %0.3
Function
Origin
Description is coming soon
Glucose
Est. %0.3
Function
Origin
A simple sugar that is also one of two components of sucrose, or table sugar. It is used as a humectant in skincare products. Glucose is also used to flavor lip care cosmetics because of its mildly sweet taste.
Glucuronic Acid
Est. %0.3
Function
Origin
Description is coming soon
Glyceryl Linoleate
Est. %0.3
Function
Origin
An ester that has superior emollient benefits in softening skin. It is a similar chemical to Vitamin F but with glycerin that can help alleviate dry-skin feeling.
Glycine
Est. %0.3
Function
Origin
A humectant moisturizing amino acid that is a part of skin's Natural Moisturizing Factor. Some recent studies suggest that it may have barrier repair properties.
Histidine
Est. %0.3
Function
Origin
A humectant moisturizing amino acid with weak antioxidant effects that is a part of the skin’s Natural Moisturizing Factor. It can attract water to the skin’s surface and is slightly alkaline, thereby helping to balance a product's pH.
Hydroxyacetophenone
Est. %0.3
Function
Origin
An antioxidant compound that can be found in many plants, although it is manufactured synthetically for skincare purposes. It can boost the preservative action of other conservants.
Isoleucine
Est. %0.3
Function
Origin
A humectant moisturizing, essential amino acid that is a part of the skin's Natural Moisturizing Factor. It helps to increase water content on the skin’s surface and can increase the barrier repair effects of ceramides.
Medicago Sativa (Alfalfa) Extract
Est. %0.3
Function
Origin
A fragrant extract with a hay-like scent derived from the alfalfa plant. It contains various antioxidant compounds such as flavonoids and saponins.
Palmitoyl Tetrapeptide-7
Est. %0.3
Function
Origin

A synthetic peptide that mimics the activity of immunoglobulin G and signals to the skin to stop the inflammation. It has been shown in studies to reduce wrinkles and enhance collagen content.

Palmitoyl Tripeptide-1
Est. %0.3
Function
Origin

A small peptide consisting of three amino acids with anti-wrinkle effects. Together with Palmitoyl Tetrapeptide-7, it is a part of the popular anti-wrinkle complex called Matrixyl™ 3000.

Fragrance
Est. %0.3
Function
Origin
Under trade secret law, manufacturers have the right not to disclose what exactly went into the fragrance and use the unspecific word Fragrance or Parfum instead. Many fragrances are highly allergenic.
PCA
Est. %0.3
Function
Origin
Also known as pyrrolidone carboxylic acid, this ingredient is one of the main components of the skin's Natural Moisturizing Factor (which prevents the skin’s surface from drying out).
Phenylalanine
Est. %0.3
Function
Origin
An essential amino acid used in the treatment of vitiligo and other pigmentation issues. It is considered less effective than other anti-pigment ingredients and is often used in combination with them.
Phytosphingosine
Est. %0.3
Function
Origin
A key component of ceramides NP, AP, and EOP. It has barrier repair properties and stimulates the production of the skin’s Natural Moisturizing Factor. Phytosphingosine has strong antimicrobial and anti-inflammatory activity, which can be used to treat acne.
Polysorbate 20
Est. %0.3
Function
Origin
A viscous, amber-colored liquid that functions as a solubilizer to disperse small amounts of oil into a large water phase. Polysorbate 20 is frequently used to solubilize fragrance oils into water-based emulsions.
Proline
Est. %0.3
Function
Origin
The best humectant moisturizer of all the amino acids. It is a part of the skin's Natural Moisturizing Factor and increases hydration in the top layers of the skin. It also has antioxidant activity and helps to heal damaged skin.
Propanediol
Est. %0.3
Function
Origin
An excellent solvent capable of mixing water with normally water-insoluble ingredients. It also functions as a humectant due to its water-loving alcohol groups. Propanediol can control the viscosity of a product by reducing its thickness.
Retinyl Linoleate
Est. %0.3
Function
Origin
Description is coming soon
Sclerotium Gum
Est. %0.3
Function
Origin
A thickener with a silky, velvety feel that many manufacturers use as an alternative to silicones.
Sea Salt
Est. %0.3
Function
Origin
A mixture of minerals from saltwater. The studies show that sea salt may help to restore skin health by improving skin barrier function, improving moisturization, reducing inflammation, and reducing skin roughness and redness.
Serine
Est. %0.3
Function
Origin
A non-essential amino acid, meaning that our body can produce it. It is the largest constituent of the skin's Natural Moisturizing Factor and is used in skincare as a humectant moisturizing ingredient.
Silica
Est. %0.3
Function
Origin
A widely used cosmetic ingredient with the same chemical composition as the sand found on beaches. A common function of silica is its ability to control viscosity. In certain chemical forms, it can effectively thicken cream-style products.
Sodium Hyaluronate
Est. %0.3
Function
Origin

A sodium salt of famous hyaluronic acid. A potent humectant that hydrates the skin, supports collagen function, and fills out small wrinkles. Sodium hyaluronate also offers soothing and antioxidant properties.

Sodium Lactate
Est. %0.3
Function
Origin
A sodium salt of lactic acid. Its main function is as a humectant but it can also serve as a pH adjuster. Additionally, sodium lactate can also be used as a chemical exfoliant due to its close chemical relation to lactic acid.
Sodium Lauroyl Lactylate
Est. %0.3
Function
Origin
A multifunctional ingredient that produces foamy cleansers and allows oil and water to mix.
Sodium PCA
Est. %0.3
Function
Origin
One of the most important parts of the skin's Natural Moisturizing Factor, a mixture of various compounds that keeps the skin’s surface well hydrated. Sodium PCA is used in skincare for its fantastic humectant properties.
Sodium Stearoyl Lactylate
Est. %0.3
Function
Origin
A negatively charged surfactant that mixes oils with water and cleanses skin.
Squalene
Est. %0.3
Function
Origin
One of the main ingredients in the skin’s sebum. It helps to rebuild the natural oily film on the skin’s surface and to prevent transdermal water loss. Squalene is listed among common comedogenic ingredients by acne.org.
Sucrose Palmitate
Est. %0.3
Function
Origin
Sucrose palmitate is a sugar-based emulsifier, typically used in lotions or creams that are oil in water emulsions. One of the main benefits to these kinds of emulsifiers is their sustainability, but they are also milder on the skin.
Threonine
Est. %0.3
Function
Origin
An essential amino acid that may play a role in collagen production. However, more research is needed in order to confirm or deny these claims.
Tocopherol
Est. %0.3
Function
Origin

Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.

Valine
Est. %0.3
Function
Origin
An essential amino acid (meaning our body cannot make it on its own and we get it from food instead). Like some other amino acids, Valine is a part of the skin's Natural Moisturizing Factor.
Xanthan Gum
Est. %0.3
Function
Origin
A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.
Alpha-Isomethyl Ionone
Est. %0.3
Function
Origin
A fragrance ingredient that is supplied as a pale, yellow liquid. The scent it emits is very clean and features notes of violet and orris. Alpha-isomethyl is also used as a flavoring agent in lip care products and even in some foods and drinks.
Benzyl Salicylate
Est. %0.3
Function
Origin
A fragrance ingredient with a sweet, floral, and slightly balsamic scent. It is one of the twenty-six fragrances that are considered allergens according to the International Fragrance Association (IFRA), and so its use is restricted.
Chlorphenesin
Est. %0.3
Function
Origin
A preservative and broad-spectrum antimicrobial agent that protects products from a wide range of bacteria and fungi.
Phenoxyethanol
Est. %0.3
Function
Origin
The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Potassium Sorbate
Est. %0.3
Function
Origin
A preservative widely used in food and personal care products, available from natural sources or synthetically produced. Potassium sorbate works by inhibiting the growth of yeasts, molds, and some bacteria.