Revlon Illuminance Serum Tint SPF 15 Hazel

Revlon Illuminance Serum Tint SPF 15 Hazel
6.4
/ 10
Moisturizing
6.7 Humectancy icon Humectancy
6.0 Occlusivity icon Occlusivity
0.4Anti-wrinkle icon/ 10
Anti-wrinkle
15
SPF icon
SPF

Review

Results you may expect from using Revlon Illuminance Serum Tint SPF 15 Hazel:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Revlon Illuminance Serum Tint SPF 15 Hazel:

  • Significant moisturizing. It has a moisturizing rating of 6.4 out of 10.
  • Little anti-wrinkle effect: Revlon Illuminance Serum Tint SPF 15 Hazel has an anti-wrinkle rating of 0.4 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.
  • Adequate sun protection for most daily activities or short periods spent outdoors.

How moisturizing is it?

Highly moisturizing: Revlon Illuminance Serum Tint SPF 15 Hazel has a moisturizing rating of 6.4 out of 10.

Is it more humectant or occlusive? This product has relatively comparable levels of humectancy and occlusivity: a high humectancy of 6.7 out of 10, primarily due to the substantial concentration of Glycerin (est. ≈4.0%), and a high occlusivity of 6.0 out of 10, mainly due to the significant content of Trimethylsiloxysilicate (est. ≈11.0%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, Revlon Illuminance Serum Tint SPF 15 Hazel has a minimal anti-wrinkle rating of 0.4 out of 10. It contains one ingredient with proven anti-wrinkle efficacy: Niacinamide (est. ≈0.3%),
 one of the most effective and well-researched anti-wrinkle ingredients.
 
Among others, Revlon Illuminance Serum Tint SPF 15 Hazel also contains Tetrahexyldecyl Ascorbate, an ingredient marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Tetrahexyldecyl Ascorbate provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not contribute to the anti-wrinkle rating.
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, could deliver additional anti-wrinkle efficacy through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Sun protection

Revlon Illuminance Serum Tint SPF 15 Hazel has an SPF of 15 and provides moderate sun protection. This level of protection is generally adequate for most daily activities, such as running errands or spending short periods outdoors. However, if you spend a substantial amount of time outdoors, it is better to use a broad spectrum sunscreen with an SPF 30 or higher.

Ingredients

Est. % Ingredient Origin Functions
40
Cyclomethicone
22
Water
11
Trimethylsiloxysilicate
5.5
Octinoxate
4
Glycerin
3.1
Titanium Dioxide (CI 77891)
2
Mica
1.5
PEG-10 Dimethicone
1
Zinc Oxide
0.3
Dimethicone
0.3
Phenyl Trimethicone
0.3
PEG/PPG-18/18 Dimethicone
0.3
1,2-Hexanediol
0.3
Alcohol Denat.
0.3
Alumina
0.3
Caprylyl Glycol
0.3
Cyclopentasiloxane
0.3
Dimethiconol
0.3
Disteardimonium Hectorite
0.3
Ethylene Brassylate
0.3
Hexylene Glycol
0.3
Hydrogen Dimethicone
0.3
Lecithin
0.3
Magnesium Sulfate
0.3
Sea Salt
0.3
Methicone
0.3
Niacinamide
0.3
Polyquaternium-51
0.3
Polysilicone-11
0.3
Sodium Carrageenan
0.3
Sodium Hyaluronate
0.3
Sodium PCA
0.3
Tetrahexyldecyl Ascorbate
0.3
Tetrasodium EDTA
0.3
Tocopheryl Acetate
0.3
Trehalose
0.3
Triethoxycaprylylsilane
0.3
Triethyl Citrate
0.3
Urea
0.3
Zingiber Officinale (Ginger) Root Extract
0.3
Citral
0.3
Phenoxyethanol
0.3
Bismuth Oxychloride (CI 77163)
0.3
Iron Oxides (CI 77491)
0.3
Iron Oxides (CI 77492)
0.3
Iron Oxides (CI 77499)
Est. %
Cyclomethicone
Function:
Origin:
Water
Function:
Origin:
Trimethylsiloxysilicate
Function:
Origin:
Octinoxate
Function:
Origin:
Glycerin
Function:
Origin:
Titanium Dioxide (CI 77891)
Function:
Origin:
Mica
Function:
Origin:
PEG-10 Dimethicone
Function:
Origin:
Zinc Oxide
Function:
Origin:
Dimethicone
Function:
Origin:
Phenyl Trimethicone
Function:
Origin:
PEG/PPG-18/18 Dimethicone
Function:
Origin:
1,2-Hexanediol
Function:
Origin:
Alcohol Denat.
Function:
Origin:
Alumina
Function:
Origin:
Caprylyl Glycol
Function:
Origin:
Cyclopentasiloxane
Function:
Origin:
Dimethiconol
Function:
Origin:
Disteardimonium Hectorite
Function:
Origin:
Ethylene Brassylate
Function:
Origin:
Hexylene Glycol
Function:
Origin:
Hydrogen Dimethicone
Function:
Origin:
Lecithin
Function:
Origin:
Magnesium Sulfate
Function:
Origin:
Sea Salt
Function:
Origin:
Methicone
Function:
Origin:
Niacinamide
Function:
Origin:
Polyquaternium-51
Function:
Origin:
Polysilicone-11
Function:
Origin:
Sodium Carrageenan
Function:
Origin:
Sodium Hyaluronate
Function:
Origin:
Sodium PCA
Function:
Origin:
Tetrahexyldecyl Ascorbate
Function:
Origin:
Tetrasodium EDTA
Function:
Origin:
Tocopheryl Acetate
Function:
Origin:
Trehalose
Function:
Origin:
Triethoxycaprylylsilane
Function:
Origin:
Triethyl Citrate
Function:
Origin:
Urea
Function:
Origin:
Zingiber Officinale (Ginger) Root Extract
Function:
Origin:
Citral
Function:
Origin:
Phenoxyethanol
Function:
Origin:
Bismuth Oxychloride (CI 77163)
Function:
Origin:
Iron Oxides (CI 77491)
Function:
Origin:
Iron Oxides (CI 77492)
Function:
Origin:
Iron Oxides (CI 77499)
Function:
Origin:

Ratings

All humectants
6.7
4
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
All occlusives
11.9
11.0
0.3
0.3
0.3
Benchmark
20
Moisturizing rating
6.4
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 6.7 10
6.7
4
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Occlusivity All occlusives 11.9 20
6.0
11.0
0.3
0.3
0.3
Moisturizing rating
6.4
Ingredient Est. % Benchmark Humectancy
4
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
All humectants 6.7 10
6.7
All humectants
6.7
4
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
11
0.3
0.3
0.3
All occlusives 11.9 20
6.0
All occlusives
11.9
11.0
0.3
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
6 /10 4 0.3 0.4
n/a
- 0.3 -
Total
0.4
Niacinamide
0.4
Ingredient anti-wrinkle power
6 /10
when present at, %
4
in this formula, est. %
0.3
Tetrahexyldecyl Ascorbate
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
0.4
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
0.3
0.3
All antioxidants 1.5 3 No
All antioxidants
1.5
Niacinamide
0.3
Sodium Hyaluronate
0.3
Tetrahexyldecyl Ascorbate
0.3
Tocopheryl Acetate
0.3
Zingiber Officinale (Ginger) Root Extract
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
0.3
All soothing 0.6 5 No
All soothing
0.6
0.3
0.3
Benchmark
5

Ingredients explained

Cyclomethicone
Est. %40
Function
Origin
CyclomethiconeA blend of emollient silicones that leaves a smooth and non-greasy after-feel. Unlike other types of oils, it does not leave any residue on the skin, which is part of what makes it so popular.
Water
Est. %22
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Trimethylsiloxysilicate
Est. %11
Function
Origin
TrimethylsiloxysilicateAn occlusive moisturizing and emollient silicone resin that smoothes and softens the appearance of the skin. It also protects a product from rinsing away too easily with water, sweat, or friction.
Octinoxate
Est. %5.5
Function
Origin
OctinoxateA chemical sunscreen also known as ethylhexyl methoxycinnamate. It protects against UVB, which causes the skin to burn and tan and can lead to certain types of skin cancers. For broad-spectrum protection claims, octinoxate should be paired with a UVA sunscreen.
Glycerin
Est. %4
Function
Origin
Glycerin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Titanium Dioxide (CI 77891)
Est. %3.1
Function
Origin
Titanium Dioxide (CI 77891)One of two the most commonly used mineral sunscreens. It can absorb UV light, including UVB – which causes burning, tanning, and even skin cancer. Also used as a colorant, titanium dioxide gives a product a bright white color.
Mica
Est. %2
Function
Origin
MicaA mineral powder made up of silicates with several functions (the main one being as a colorant). It has a shimmery appearance, making it highly desirable in certain cosmetic products. Mica also helps the product to apply more smoothly.
PEG-10 Dimethicone
Est. %1.5
Function
Origin
PEG-10 DimethiconeA polyethylene-based emulsifying ingredient. It has a water-loving portion and an oil-loving portion that help to keep the water and oil phases connected to form an emulsion.
Zinc Oxide
Est. %1
Function
Origin
Zinc OxideA white mineral powder mainly used in skincare as a physical sunscreen. It protects against UVA light that leads to visible signs of aging, including wrinkles and fine lines. Zinc oxide can also be used as a colorant to enhance the whiteness of a product.
Dimethicone
Est. %0.3
Function
Origin
DimethiconeThe most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Phenyl Trimethicone
Est. %0.3
Function
Origin
Phenyl TrimethiconeA silicone fluid that is used as an occlusive moisturizer. It applies smoothly to the skin and reduces the tack associated with organic oils.
PEG/PPG-18/18 Dimethicone
Est. %0.3
Function
Origin
PEG/PPG-18/18 DimethiconeA silicone-based emulsifier that has the ability to create non-sticky and non-greasy formulas.
1,2-Hexanediol
Est. %0.3
Function
Origin
1,2-HexanediolA multi-functional formula helper. It is a well-studied preservtive against bacteria and can help pigments and fragrances disperse evenly in a formula.
Alcohol Denat.
Est. %0.3
Function
Origin
Alcohol Denat.

Denatured alcohol is ethanol that contains additives that make it unsafe to consume. It is mainly used as a solvent and an antimicrobial agent. A major drawback to alcohol denat. is that it dries out the skin.

Alumina
Est. %0.3
Function
Origin
AluminaA mineral derived from the metal ore known as aluminum. It is commonly used as an abrasive and also acts as a thickening viscosity controlling agent (and thus as a bulking agent). Alumina is also a great opacifier.
Caprylyl Glycol
Est. %0.3
Function
Origin
Caprylyl GlycolAn emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Cyclopentasiloxane
Est. %0.3
Function
Origin
CyclopentasiloxaneA lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in.
Dimethiconol
Est. %0.3
Function
Origin
DimethiconolA synthetic dimethicone with rich, non-tacky emolliency. It features the typical sensorial profile of silicones, with high spreadability and a luxurious, oil-free after-feel. Dimethiconol can also serve as an antifoaming agent.
Disteardimonium Hectorite
Est. %0.3
Function
Origin
Disteardimonium HectoriteA clay ingredient that functions primarily as a viscosity controlling agent that thickens all types of formulas. Disteardimonium hectorite imparts a smooth, velvety feel, making it a luxurious addition to any formula.
Ethylene Brassylate
Est. %0.3
Function
Origin
Ethylene BrassylateA synthetic fragrance ingredient known for its musky scent. Like most fragrance ingredients, it can be irritating.
Hexylene Glycol
Est. %0.3
Function
Origin
Hexylene GlycolA multifunctional ingredient that is best known for its use as a solvent. It can dissolve both water-based ingredients and oils. For this reason, it can also function as an emulsifier, allowing oil and water ingredients to mix and remain stable.
Hydrogen Dimethicone
Est. %0.3
Function
Origin
Hydrogen DimethiconeDescription is coming soon
Lecithin
Est. %0.3
Function
Origin
LecithinA humectant, emollient, and emulsifier best suited for water-in-oil emulsions. Lecithin can come from sunflowers, soy, and eggs. The downside to lecithin is that it causes an extra burden on the formula’s preservative because it is nutritious.
Magnesium Sulfate
Est. %0.3
Function
Origin
Magnesium SulfateA naturally occurring mineral that is commonly used in skincare products as a bulking agent. It helps to control the viscosity of products by making them thicker.
Sea Salt
Est. %0.3
Function
Origin
Sea SaltA mixture of minerals from saltwater. The studies show that sea salt may help to restore skin health by improving skin barrier function, improving moisturization, reducing inflammation, and reducing skin roughness and redness.
Methicone
Est. %0.3
Function
Origin
MethiconeA silicone oil that can function as an occlusive moisturizer and emollient. Occasionally, methicone is used as a surface modifier for various pigments to improve the longevity and vibrancy of colorants.
Niacinamide
Est. %0.3
Function
Origin
Niacinamide

Also known as vitamin B3, this ingredient is a true superstar with confirmed moisturizing, anti-acne, hyperpigmentation, and antioxidant benefits. Two studies confirm its significant anti-wrinkle efficacy.

Polyquaternium-51
Est. %0.3
Function
Origin
Polyquaternium-51A biocompatible phospholipid copolymer that is designed to mimic the lipid-based cell membrane found in human skin. Its main function is as a humectant moisturizer.
Polysilicone-11
Est. %0.3
Function
Origin
Polysilicone-11A synthetic rubber-like substance of the silicone family that has no color or distinct scent. These are large molecules that cannot penetrate the skin but instead create a thin silky film on the skin's surface.
Sodium Carrageenan
Est. %0.3
Function
Origin
Sodium CarrageenanDescription is coming soon
Sodium Hyaluronate
Est. %0.3
Function
Origin
Sodium Hyaluronate

A sodium salt of famous hyaluronic acid. A potent humectant that hydrates the skin, supports collagen function, and fills out small wrinkles. Sodium hyaluronate also offers soothing and antioxidant properties.

Sodium PCA
Est. %0.3
Function
Origin
Sodium PCAOne of the most important parts of the skin's Natural Moisturizing Factor, a mixture of various compounds that keeps the skin’s surface well hydrated. Sodium PCA is used in skincare for its fantastic humectant properties.
Tetrahexyldecyl Ascorbate
Est. %0.3
Function
Origin
Tetrahexyldecyl AscorbateA lipid-soluble form of vitamin C that is more stable and less irritating than ascorbic acid. According to a recent clinical study, THDA has all the capabilities of regular vitamin C, including anti-wrinkle and anti-pigment activity.
Tetrasodium EDTA
Est. %0.3
Function
Origin
Tetrasodium EDTAOne of the most common synthetic chelators. It can reduce the 'hardness' of water and so is often used in rinse-off products.
Tocopheryl Acetate
Est. %0.3
Function
Origin
Tocopheryl Acetate

An antioxidant derivative of tocopherol (vitamin E). It helps to protect cells from free radicals and UV damage through the conversion to active vitamin E in the skin. It is more stable than tocopherol.

Trehalose
Est. %0.3
Function
Origin
TrehaloseA sweet-tasting saccharide that can be found in various yeasts and fungi and that is manufactured from starch for cosmetic purposes. It is one of the most popular sugars in skincare and is mainly used for its humectant properties.
Triethoxycaprylylsilane
Est. %0.3
Function
Origin
TriethoxycaprylylsilaneA binding and coating ingredient that allows pigments like iron oxides and mica to disperse better in oily environments. This leads to more vibrant colors.
Triethyl Citrate
Est. %0.3
Function
Origin
Triethyl CitrateDescription is coming soon
Urea
Est. %0.3
Function
Origin
UreaUrea can be found in urine, skin, and other tissues as a degradation product of proteins. In concentrations below 5%, urea is humectant moisturizing. At concentrations above 10% it is keratolytic, that helps to break away old, flaking, and cracked skin.
Zingiber Officinale (Ginger) Root Extract
Est. %0.3
Function
Origin
Zingiber Officinale (Ginger) Root ExtractA fragrant and anti-inflammatory extract derived from ginger roots. It is a major part of Chinese traditional medicine. In can increase blood circulation, which helps with skin healing and skin metabolism.
Citral
Est. %0.3
Function
Origin
CitralA fragrant compound found in many essential oils (especially lemon myrtle and lemongrass essential oil). It has a sweet, lemon-like scent. People with sensitive skin should try to avoid products with citral, or at least do a patch test before using.
Phenoxyethanol
Est. %0.3
Function
Origin
PhenoxyethanolThe most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Bismuth Oxychloride (CI 77163)
Est. %0.3
Function
Origin
Bismuth Oxychloride (CI 77163)An inorganic colorant that gives off a pearly white sheen. Its appearance is a result of light reflecting and refracting through the layers it forms.
Iron Oxides (CI 77491)
Est. %0.3
Function
Origin
Iron Oxides (CI 77491)A red colorant also known as red iron oxide. This is an EU-approved colorant used in a wide variety of products.
Iron Oxides (CI 77492)
Est. %0.3
Function
Origin
Iron Oxides (CI 77492)Also known as iron (III) oxide, this ingredient is a yellow-colored pigment that can either be derived from minerals or produced synthetically. It adds yellow tones to cosmetic products.
Iron Oxides (CI 77499)
Est. %0.3
Function
Origin
Iron Oxides (CI 77499)A black colorant also known as black iron oxide used in a wide range of skincare products.