Tirtir Mask Fit Crystal Mesh Cushion

Tirtir Mask Fit Crystal Mesh Cushion
3.2
/ 10
Moisturizing
4.3 Humectancy icon Humectancy
2.1 Occlusivity icon Occlusivity
1.5Anti-wrinkle icon/ 10
Anti-wrinkle

Review

Does Tirtir Mask Fit Crystal Mesh Cushion work?

Based on the ingredient list analysis by CreamScan AI, these are the key benefits you can expect from using Tirtir Mask Fit Crystal Mesh Cushion:

  • Light moisturizing. It has a moisturizing rating of 3.2 out of 10.
  • Little anti-wrinkle effect: Tirtir Mask Fit Crystal Mesh Cushion has an anti-wrinkle rating of 1.5 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.

Lightweight moisturizer suitable for oily skin

According to CreamScan analysis, Tirtir Mask Fit Crystal Mesh Cushion is lightly moisturizing, with a moisturizing rating of 3.2 out of 10.

Is it more humectant or occlusive? Rather humectant. It has a low occlusivity of 2.1 out of 10 and a moderate humectancy of 4.3 out of 10, primarily due to Glycerin (est. ≈1.5%), Niacinamide (est. ≈1.0%) and Rhododendron Anthopogon Flower Powder (est. ≈0.3%).

This type of moisturizer is well-suited for people with oily skin who want essential hydration in a relatively lightweight, non-greasy formula. It combines a substantial amount of humectants with a limited amount of occlusive ingredients to enhance moisturizing efficacy without feeling too heavy.

Due to its moderate humectant content and some occlusivity, it can also positively contribute the moisturizing efficacy of a skincare routine for normal skin when used alongside another moisturizer.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Little anti-wrinkle efficacy

According to CreamScan analysis, Tirtir Mask Fit Crystal Mesh Cushion has a minimal anti-wrinkle rating of 1.5 out of 10.

It contains one ingredient with proven anti-wrinkle efficacy: Niacinamide (est. ≈1.0%), 
 one of the most effective and well-researched anti-wrinkle ingredients. A clinical study involving 30 participants (Kawada et al.) confirmed that a cream with 4% niacinamide reduced the average depth of wrinkles around the eyes by 9% after 8 weeks of use, compared to a vehicle (the same formulation without niacinamide).
 
Among others, Tirtir Mask Fit Crystal Mesh Cushion also contains Adenosine, an ingredient often marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Adenosine provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not contribute to the anti-wrinkle rating.
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, can deliver some anti-wrinkle effects through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Ingredients

Est. % Ingredient Origin Functions
60
9
6
4
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Water
Function:
Origin:
Titanium Dioxide (CI 77891)
Function:
Origin:
Zinc Oxide
Function:
Origin:
Homosalate
Function:
Origin:
Dimethicone
Function:
Origin:
Propylene Glycol Dibenzoate
Function:
Origin:
Octisalate
Function:
Origin:
Glycerin
Function:
Origin:
Methyl Hydrogenated Rosinate
Function:
Origin:
Niacinamide
Function:
Origin:
Cetyl PEG/PPG-10/1 Dimethicone
Function:
Origin:
Phenyl Trimethicone
Function:
Origin:
Cyclopentasiloxane
Function:
Origin:
Polycaprylylsilsesquioxane
Function:
Origin:
VP/Hexadecene Copolymer
Function:
Origin:
Alcohol Denat.
Function:
Origin:
Rhododendron Anthopogon Flower Powder
Function:
Origin:
Magnesium Sulfate
Function:
Origin:
PEG-10 Dimethicone
Function:
Origin:
Lauryl PEG-10 Tris(Trimethylsiloxy)silylethyl Dimethicone
Function:
Origin:
Hydrogenated Polyisobutene
Function:
Origin:
Synthetic Fluorphlogopite
Function:
Origin:
Aluminum Hydroxide
Function:
Origin:
Trimethylsiloxysilicate
Function:
Origin:
Stearic Acid
Function:
Origin:
Caprylyl Glycol
Function:
Origin:
Glyceryl Caprylate
Function:
Origin:
Disodium Stearoyl Glutamate
Function:
Origin:
Disteardimonium Hectorite
Function:
Origin:
Triethoxycaprylylsilane
Function:
Origin:
Ethylhexylglycerin
Function:
Origin:
Alumina
Function:
Origin:
Propylene Carbonate
Function:
Origin:
Ethylene/Propylene/Styrene Copolymer
Function:
Origin:
Adenosine
Function:
Origin:
Butylene/Ethylene/Styrene Copolymer
Function:
Origin:
Tocopherol
Function:
Origin:
Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate
Function:
Origin:
Butylene Glycol
Function:
Origin:
1,2-Hexanediol
Function:
Origin:
Hydrolyzed Conchiolin Protein
Function:
Origin:
Bifida Polysaccharide
Function:
Origin:
Dextrin Palmitate
Function:
Origin:
Isopropyl Titanium Triisostearate
Function:
Origin:
Fragrance
Function:
Origin:
Iron Oxides (CI 77492)
Function:
Origin:
Iron Oxides (CI 77491)
Function:
Origin:
Iron Oxides (CI 77499)
Function:
Origin:

Ratings

All humectants
4.3
1.5
1
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
All occlusives
4.2
3.0
0.3
0.3
0.3
0.3
Benchmark
20
Moisturizing rating
3.2
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 4.3 10
4.3
1.5
1
0.3
0.3
0.3
0.3
0.3
0.3
Occlusivity All occlusives 4.2 20
2.1
3.0
0.3
0.3
0.3
0.3
Moisturizing rating
3.2
Ingredient Est. % Benchmark Humectancy
1.5
1
0.3
0.3
0.3
0.3
0.3
0.3
All humectants 4.3 10
4.3
All humectants
4.3
1.5
1
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
3
0.3
0.3
0.3
0.3
All occlusives 4.2 20
2.1
All occlusives
4.2
3.0
0.3
0.3
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
6 /10 4 1 1.5
n/a
- 0.3 -
Total
1.5
Niacinamide
1.5
Ingredient anti-wrinkle power
6 /10
when present at, %
4
in this formula, est. %
1
Adenosine
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
1.5
Ingredient Est. % Benchmark
Rich in Antioxidants
1
0.3
0.3
All antioxidants 1.6 3 No
All antioxidants
1.6
Niacinamide
1
Tocopherol
0.3
Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
1
All soothing 1 5 No
All soothing
1
1
Benchmark
5

Ingredients explained

Water
Est. %60
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Titanium Dioxide (CI 77891)
Est. %9
Function
Origin
Titanium Dioxide (CI 77891)One of two the most commonly used mineral sunscreens. It can absorb UV light, including UVB – which causes burning, tanning, and even skin cancer. Also used as a colorant, titanium dioxide gives a product a bright white color.
Zinc Oxide
Est. %6
Function
Origin
Zinc OxideA white mineral powder mainly used in skincare as a physical sunscreen. It protects against UVA light that leads to visible signs of aging, including wrinkles and fine lines. Zinc oxide can also be used as a colorant to enhance the whiteness of a product.
Homosalate
Est. %4
Function
Origin
HomosalateA synthetic chemical UV filter that protects against harmful UVB radiation.
Dimethicone
Est. %3
Function
Origin
DimethiconeThe most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Propylene Glycol Dibenzoate
Est. %2.5
Function
Origin
Propylene Glycol Dibenzoate
Octisalate
Est. %2
Function
Origin
OctisalateA UVB sunscreen also known as ethylhexyl salicylate. It is normally paired with UVA sunscreens to provide broad-spectrum protection. Octisalate also protects other ingredients, like colorants and antioxidants, from deterioration due to exposure to UV light.
Glycerin
Est. %1.5
Function
Origin
Glycerin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Methyl Hydrogenated Rosinate
Est. %1.3
Function
Origin
Methyl Hydrogenated Rosinate
Niacinamide
Est. %1
Function
Origin
Niacinamide

Also known as vitamin B3, this ingredient is a true superstar with confirmed moisturizing, anti-acne, hyperpigmentation, and antioxidant benefits. Two studies confirm its significant anti-wrinkle efficacy.

Cetyl PEG/PPG-10/1 Dimethicone
Est. %0.3
Function
Origin
Cetyl PEG/PPG-10/1 DimethiconeA silicone-based powerful emulsifier that helps to create lightweight and pleasant feeling lotions and creams.
Phenyl Trimethicone
Est. %0.3
Function
Origin
Phenyl TrimethiconeA silicone fluid that is used as an occlusive moisturizer. It applies smoothly to the skin and reduces the tack associated with organic oils.
Cyclopentasiloxane
Est. %0.3
Function
Origin
CyclopentasiloxaneA lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in.
Polycaprylylsilsesquioxane
Est. %0.3
Function
Origin
Polycaprylylsilsesquioxane
VP/Hexadecene Copolymer
Est. %0.3
Function
Origin
VP/Hexadecene Copolymer
Alcohol Denat.
Est. %0.3
Function
Origin
Alcohol Denat.

Denatured alcohol is ethanol that contains additives that make it unsafe to consume. It is mainly used as a solvent and an antimicrobial agent. A major drawback to alcohol denat. is that it dries out the skin.

Rhododendron Anthopogon Flower Powder
Est. %0.3
Function
Origin
Rhododendron Anthopogon Flower Powder
Magnesium Sulfate
Est. %0.3
Function
Origin
Magnesium SulfateA naturally occurring mineral that is commonly used in skincare products as a bulking agent. It helps to control the viscosity of products by making them thicker.
PEG-10 Dimethicone
Est. %0.3
Function
Origin
PEG-10 DimethiconeA polyethylene-based emulsifying ingredient. It has a water-loving portion and an oil-loving portion that help to keep the water and oil phases connected to form an emulsion.
Lauryl PEG-10 Tris(Trimethylsiloxy)silylethyl Dimethicone
Est. %0.3
Function
Origin
Lauryl PEG-10 Tris(Trimethylsiloxy)silylethyl Dimethicone
Hydrogenated Polyisobutene
Est. %0.3
Function
Origin
Hydrogenated PolyisobuteneA viscous liquid that makes a great oil base due to its smooth sensorial profile. It has emollient features, including good spreadability and little tack upon application. It also has the added benefit of being able to thicken products.
Synthetic Fluorphlogopite
Est. %0.3
Function
Origin
Synthetic FluorphlogopiteAlso known as synthetic mica, this ingredient’s best property is its ability to form thin, sheet-like crystals. This gives products (mostly makeup) great slip.
Aluminum Hydroxide
Est. %0.3
Function
Origin
Aluminum HydroxideA white mineral powder, also known as alumina, that is derived from aluminum metal. It is frequently used as an abrasive in exfoliating products and as a thickener. Aluminum oxide is also a great opacifier.
Trimethylsiloxysilicate
Est. %0.3
Function
Origin
TrimethylsiloxysilicateAn occlusive moisturizing and emollient silicone resin that smoothes and softens the appearance of the skin. It also protects a product from rinsing away too easily with water, sweat, or friction.
Stearic Acid
Est. %0.3
Function
Origin
Stearic AcidA saturated fatty acid found in vegetable butter and animal fats. It is an occlusive moisturizing and emollient ingredient and also helps to maintain the barrier function of the skin.
Caprylyl Glycol
Est. %0.3
Function
Origin
Caprylyl GlycolAn emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Glyceryl Caprylate
Est. %0.3
Function
Origin
Glyceryl CaprylateA waxy solid derived from vegetable oils that has emollient and emulsifying properties. It is also known to boost the efficacy of organic acid preservatives by destabilizing the microbe's cell membrane.
Disodium Stearoyl Glutamate
Est. %0.3
Function
Origin
Disodium Stearoyl GlutamateAn emulsifier that can provide a light feel, especially when used in color cosmetics to coat pigments. It is not expected to be irritating when used at recommended levels.
Disteardimonium Hectorite
Est. %0.3
Function
Origin
Disteardimonium HectoriteA clay ingredient that functions primarily as a viscosity controlling agent that thickens all types of formulas. Disteardimonium hectorite imparts a smooth, velvety feel, making it a luxurious addition to any formula.
Triethoxycaprylylsilane
Est. %0.3
Function
Origin
TriethoxycaprylylsilaneA binding and coating ingredient that allows pigments like iron oxides and mica to disperse better in oily environments. This leads to more vibrant colors.
Ethylhexylglycerin
Est. %0.3
Function
Origin
EthylhexylglycerinA preservative booster derived from glycerin. It is commonly paired with other preservatives to improve their efficacy. Ethylhexylglycerin is also a humectant due to its chemical base of glycerin.
Alumina
Est. %0.3
Function
Origin
AluminaA mineral derived from the metal ore known as aluminum. It is commonly used as an abrasive and also acts as a thickening viscosity controlling agent (and thus as a bulking agent). Alumina is also a great opacifier.
Propylene Carbonate
Est. %0.3
Function
Origin
Propylene CarbonateA derivative of propylene glycol that is used most frequently as a solvent. Additionally, propylene carbonate serves as a viscosity controlling agent reducing the thickness of the products it is added to.
Ethylene/Propylene/Styrene Copolymer
Est. %0.3
Function
Origin
Ethylene/Propylene/Styrene Copolymer
Adenosine
Est. %0.3
Function
Origin
Adenosine

A key molecule responsible for energy transportation, signaling, and enzyme activity. Adenosine is a popular anti-wrinkle ingredient, however, the key study about its anti-wrinkle efficacy (1) does not meet CreamScan Research Evaluation Standards as it is not double-blind.

Butylene/Ethylene/Styrene Copolymer
Est. %0.3
Function
Origin
Butylene/Ethylene/Styrene Copolymer
Tocopherol
Est. %0.3
Function
Origin
Tocopherol

Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.

Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate
Est. %0.3
Function
Origin
Pentaerythrityl Tetra-di-t-butyl HydroxyhydrocinnamateAn antioxidant that protects vulnerable ingredients from the damage caused by ultraviolet radiation, which can also lead to the generation of damaging free radical species.
Butylene Glycol
Est. %0.3
Function
Origin
Butylene Glycol

A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.

1,2-Hexanediol
Est. %0.3
Function
Origin
1,2-HexanediolA multi-functional formula helper. It is a well-studied preservtive against bacteria and can help pigments and fragrances disperse evenly in a formula.
Hydrolyzed Conchiolin Protein
Est. %0.3
Function
Origin
Hydrolyzed Conchiolin ProteinA chemically chopped up protein derived from mollusk shells. It is said to be able to treat pigmentation issues, although this claim has not yet been confirmed.
Bifida Polysaccharide
Est. %0.3
Function
Origin
Bifida Polysaccharide
Dextrin Palmitate
Est. %0.3
Function
Origin
Dextrin Palmitate
Isopropyl Titanium Triisostearate
Est. %0.3
Function
Origin
Isopropyl Titanium Triisostearate
Fragrance
Est. %0.3
Function
Origin
FragranceUnder trade secret law, manufacturers have the right not to disclose what exactly went into the fragrance and use the unspecific word Fragrance or Parfum instead. Many fragrances are highly allergenic.
Iron Oxides (CI 77492)
Est. %0.3
Function
Origin
Iron Oxides (CI 77492)Also known as iron (III) oxide, this ingredient is a yellow-colored pigment that can either be derived from minerals or produced synthetically. It adds yellow tones to cosmetic products.
Iron Oxides (CI 77491)
Est. %0.3
Function
Origin
Iron Oxides (CI 77491)A red colorant also known as red iron oxide. This is an EU-approved colorant used in a wide variety of products.
Iron Oxides (CI 77499)
Est. %0.3
Function
Origin
Iron Oxides (CI 77499)A black colorant also known as black iron oxide used in a wide range of skincare products.