Sanitas Skincare RejuvenA

Sanitas Skincare RejuvenA
3.2
/ 10
Moisturizing
2.7 Humectancy icon Humectancy
3.6 Occlusivity icon Occlusivity
2.5Anti-wrinkle icon/ 10
Anti-wrinkle
Rich
in Antioxidants
$$$$

Review

Results you may expect from using Sanitas Skincare RejuvenA:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Sanitas Skincare RejuvenA:

  • Light moisturizing. It has a moisturizing rating of 3.2 out of 10.
  • Some anti-wrinkle efficacy: Sanitas Skincare RejuvenA has an anti-wrinkle rating of 2.5 out of 10 so you may expect some, although limited, effect on wrinkles.
  • Antioxidant protection.

How moisturizing is it?

Lightly moisturizing: Sanitas Skincare RejuvenA has a moisturizing rating of 3.2 out of 10.

Is it more humectant or occlusive? Rather occlusive. It has a low humectancy of 2.7 out of 10 and a moderate occlusivity of 3.6 out of 10, primarily due to the high content of Simmondsia Chinensis (Jojoba) Seed Oil (est. ≈6.0%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, Sanitas Skincare RejuvenA has a slight anti-wrinkle rating of 2.5 out of 10. It contains one ingredient with proven anti-wrinkle efficacy: Retinol (est. ≈0.1%), 
 the most effective non-prescription ingredient with well-proven efficacy to reduce wrinkles.
 
Among others, Sanitas Skincare RejuvenA also contains some ingredients marketed as effective in reducing wrinkles, specifically Tetrahexyldecyl Ascorbate, Beta-Glucan, Ubiquinone, Dipalmitoyl Hydroxyproline, and Sodium Ascorbate. However, the studies supporting the anti-wrinkle claims of these ingredients provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, these ingredients do not contribute to the anti-wrinkle rating.
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, could deliver additional anti-wrinkle efficacy through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Antioxidant benefits

We estimate that Sanitas Skincare RejuvenA is rich (> 3%) in antioxidants, specifically Tocopheryl Acetate (est. ≈4.0%).

A key benefit of antioxidants is their ability to reduce oxidative stress caused by free radicals and therefore prevent accelerated skin aging. Studies also show that antioxidants can protect against environmental damage such as UV radiation and pollution, and help reduce inflammation and skin redness.

Ingredients

Est. % Ingredient Origin Functions
65
9
6
4
3
0.1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:

Ratings

All humectants
2.7
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
All occlusives
7.2
6.0
0.3
0.3
0.3
0.3
Benchmark
20
Moisturizing rating
3.2
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 2.7 10
2.7
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Occlusivity All occlusives 7.2 20
3.6
6.0
0.3
0.3
0.3
0.3
Moisturizing rating
3.2
Ingredient Est. % Benchmark Humectancy
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
All humectants 2.7 10
2.7
All humectants
2.7
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
6
0.3
0.3
0.3
0.3
All occlusives 7.2 20
3.6
All occlusives
7.2
6.0
0.3
0.3
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
10 /10 0.4 0.1 2.5
n/a
- 0.3 -
n/a
- 0.3 -
n/a
- 0.3 -
n/a
- 0.3 -
n/a
- 0.3 -
Total
2.5
Retinol
2.5
Ingredient anti-wrinkle power
10 /10
when present at, %
0.4
in this formula, est. %
0.1
Tetrahexyldecyl Ascorbate
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Beta-Glucan
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Ubiquinone
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Dipalmitoyl Hydroxyproline
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Sodium Ascorbate
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
2.5
Ingredient Est. % Benchmark
Rich in Antioxidants
4
0.3
0.3
0.3
0.3
0.3
0.3
0.3
All antioxidants 6.1 3 Rich in antioxidants
All antioxidants
6.1
Tocopheryl Acetate
4
Tetrahexyldecyl Ascorbate
0.3
Sodium Hyaluronate
0.3
Beta-Glucan
0.3
Ubiquinone
0.3
Sodium Ascorbate
0.3
Mannitol
0.3
BHT
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
0.3
0.3
0.3
0.3
0.3
0.3
All soothing 2.1 5 No
All soothing
2.1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %65
Function
Origin
The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
C12-15 Alkyl Benzoate
Est. %9
Function
Origin
A synthetic emollient ester. It works to improve the appearance of the skin by filling in the microcracks on the surface, thereby making the skin appear softer and smoother. It imparts a lightweight, velvety feel.
Simmondsia Chinensis (Jojoba) Seed Oil
Est. %6
Function
Origin
A liquid plant wax, also known as Jojoba oil, pressed from the seeds of Simmondsia chinensis. These seeds can contain up to 50% of liquid wax. It is used as an occlusive moisturizer, emollient, and emulsifier.
Tocopheryl Acetate
Est. %4
Function
Origin
An antioxidant derivative of tocopherol (vitamin E). It helps to protect cells from free radicals and UV damage through the conversion to active vitamin E in the skin. It is more stable than tocopherol.
Polyacrylamide
Est. %3
Function
Origin
A synthetic ingredient that can thicken products instantly while still keeping them light and often gel-like.
Retinol
Est. %0.1
Function
Origin

One of the most famous and well-researched anti-aging ingredients with a maximum anti-wrinkle power of 10 out of 10. It is proven to decrease wrinkles and help the skin regain its thickness, firmness, and texture. Retinol is also effective in treating pigmentation issues such as dark spots and acne.

Tetrahexyldecyl Ascorbate
Est. %0.3
Function
Origin
A lipid-soluble form of vitamin C that is more stable and less irritating than ascorbic acid. According to a recent clinical study, THDA has all the capabilities of regular vitamin C, including anti-wrinkle and anti-pigment activity.
Sodium Hyaluronate
Est. %0.3
Function
Origin
A sodium salt of famous hyaluronic acid. A potent humectant that hydrates the skin, supports collagen function, and fills out small wrinkles. Sodium hyaluronate also offers soothing and antioxidant properties.
Beta-Glucan
Est. %0.3
Function
Origin
A special polysaccharide obtained from cereals, mushrooms, yeast, bacteria, and some species of seaweed. It is a promising anti-wrinkle, wound healing, antioxidant, and moisturizing ingredient.
Hordeum Vulgare Extract
Est. %0.3
Function
Origin
A soothing and emollient extract derived from barley, a cereal grain commonly used in the breadmaking and beer fermentation process. It contains a beneficial polysaccharide called beta-glucan, as well as flavonoids and organic acids.
Nannochloropsis Oculata Extract
Est. %0.3
Function
Origin
Description is coming soon
Hydrogenated Lecithin
Est. %0.3
Function
Origin
A version of plain lecithin that has been saturated with hydrogen atoms. This ingredient can be derived from plants, like soy or sunflower, from egg yolks, or made synthetically. Its major function is to emulsify water and oils.
Phospholipids
Est. %0.3
Function
Origin
A large group of lipids that are an essential component of every single cell membrane in the body. They have excellent emollient properties. Phospholipids are also utilized in the manufacturing of ‘fancy’ formulations such as liposomes.
Cholesterol
Est. %0.3
Function
Origin
An emollient and important barrier repairing lipid, effective when combined with fatty acids and ceramides. Around 25% of the skin’s lipid layer is made up of cholesterol and it is found in the membrane of every single cell in our body.
Ceramide NP
Est. %0.3
Function
Origin
Also known as ceramide 3, it is the most common ceramide in our skin. It helps to restore the skin’s lipid barrier and alleviate the symptoms of dry and cracked skin. Research has shown that skin suffering from conditions such as AD lacks ceramides.
Ceramide NS
Est. %0.3
Function
Origin
A wax-like lipid natural to the skin’s lipid matrix. It is less frequently used but, in combination with other ceramides, can help to restore balance in the skin’s lipid barrier.
Ceramide EOS
Est. %0.3
Function
Origin
A skin-identical lipid that is an essential part of the skin barrier. Aging or exposed-to-cold skin lacks it and applying a ceramide-rich cream can replenish the lipid barrier. It may replenish linoleic acid levels in acne-prone skin.
Ceramide EOP
Est. %0.3
Function
Origin
Formerly called Ceramide 1, this ingredient is a skin-identical wax-like lipid with an ultra-long fatty acid chain. It restores and stabilizes the skin’s lipid matrix and helps to treat dry and flaky skin, especially when combined with other ceramides.
Ceramide AP
Est. %0.3
Function
Origin
Previously called Ceramide 6 II, Ceramide AP is one of the most common ceramides in the skin. Research has shown that dry, flaky skin has significantly less Ceramide AP. Its application helps to treat dry skin by restoring balance in the skin lipids.
Caprooyl Phytosphingosine
Est. %0.3
Function
Origin
A synthetic emollient that is similar to skin-identical ceramides. It helps to replenish the building blocks of the skin’s lipid barrier and helps with the formation and stability of emulsions.
Caprooyl Sphingosine
Est. %0.3
Function
Origin
A synthetic emollient similar to skin-identical ceramides. It helps to replenish the building blocks of the skin’s lipid barrier and aids in the formation and stability of emulsions.
Ubiquinone
Est. %0.3
Function
Origin
Also known as Coenzyme Q10, this bright orange antioxidant supports the skin's energy metabolism. It also offers some anti-pigment action. Dietary supplementation of Ubiquinone improves the appearance of wrinkles.
Allantoin
Est. %0.3
Function
Origin
A fluffy, white powder that acts as a humectant due to its water-loving chemistry and as an exfoliant that helps to remove dead skin cells. It has also been shown to be very soothing to irritated and inflamed skin.
Glycerin
Est. %0.3
Function
Origin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Santalum Album (Sandalwood) Extract
Est. %0.3
Function
Origin
A soothing, fragrant extract obtained from the luxurious and expensive sandalwood. It has a characteristic woody, warm and creamy scent.
Phellodendron Amurense Bark Extract
Est. %0.3
Function
Origin
A soothing and antimicrobial extract derived from the Amur cork tree (which is used in traditional Chinese remedies). It contains various beneficial compounds such as alkaloids, limonoids, flavonoids, and phenolic acids.
Lecithin
Est. %0.3
Function
Origin
A humectant, emollient, and emulsifier best suited for water-in-oil emulsions. Lecithin can come from sunflowers, soy, and eggs. The downside to lecithin is that it causes an extra burden on the formula’s preservative because it is nutritious.
Dipalmitoyl Hydroxyproline
Est. %0.3
Function
Origin
An amino acid derivative. It helps with skin moisturization and may have wrinkle-reducing effects.
Beta-Sitosterol
Est. %0.3
Function
Origin
A plant-based equivalent of cholesterol with emollient and anti-inflammatory properties. It takes part in restoring the barrier function of dry and cracked skin, and can even help to treat dry skin conditions such as eczema.
Linoleic Acid
Est. %0.3
Function
Origin
A fatty acid isolated from various plant oils (notably evening primrose, safflower, grape seed, and sunflower oil). It is an occlusive moisturizer and emollient that doesn't leave an oily, sticky residue and is especially suitable for oily and acne-prone skin.
Squalane
Est. %0.3
Function
Origin
An occlusive moisturizing and emollient compound that forms part of the skin’s sebum. The main source of squalane had always been shark liver. Now, however, it is manufactured synthetically or derived from plant oils, such as olive and peanut oil.
Polysorbate 20
Est. %0.3
Function
Origin
A viscous, amber-colored liquid that functions as a solubilizer to disperse small amounts of oil into a large water phase. Polysorbate 20 is frequently used to solubilize fragrance oils into water-based emulsions.
Polysorbate 80
Est. %0.3
Function
Origin
A non-ionic surfactant, which means that it contains no chemical charges. It can be used as a mild cleansing agent in skin cleansing products but is more commonly used for its emulsifying abilities.
Polyglyceryl-3 Methylglucose Distearate
Est. %0.3
Function
Origin
A natural ingredient that produces oil and water mixtures with soft skin feel.
Alcohol
Est. %0.3
Function
Origin
An effective antimicrobial ingredient that kills bacteria, fungi, and even some viruses. It is also an excellent solvent and astringent. Alcohol helps to create lighter and less viscous products. It can, however, be dehydrating and skin-sensitizing.
Ceteareth-25
Est. %0.3
Function
Origin
A natural or synthetically produced emulsifier often used to help form stable emulsions.
Cetyl Alcohol
Est. %0.3
Function
Origin
A waxy solid fatty alcohol derived from palm oil. It is most commonly used as a co-emulsifier and affects the final aesthetic of the product, leaving a soft and silky feeling on the skin. Cetyl alcohol is also used as a viscosity controlling agent.
Behenic Acid
Est. %0.3
Function
Origin
A naturally-occuring ingredient from certain plant oils, behenic acid acts as an emulsifier and surfactant and provides a soft cushiony feeling.
Sodium Ascorbate
Est. %0.3
Function
Origin
A well-researched sodium salt of vitamin C. It has antioxidant, collagen-boosting, and pigment-improving properties. It degrades very easily when exposed to air and needs careful packaging.
Mannitol
Est. %0.3
Function
Origin
A sweet-tasting, sugar-derived, humectant alcohol that can stabilize a skincare formula and offer some antioxidant and soothing properties.
Pullulan
Est. %0.3
Function
Origin
Description is coming soon
BHT
Est. %0.3
Function
Origin
An antioxidant ingredient that naturally occurs in green algae and some bacteria or fungi but, for commercial use, is created synthetically. BHT is also used occasionally as a fragrance, where it presents a sweet, camphor-like odor.
C13-14 Isoparaffin
Est. %0.3
Function
Origin
A lightweight petroleum derivative. It is a very thin liquid that functions as an emollient and a solvent for other liquids (such as thicker oils or silicones).
Laureth-7
Est. %0.3
Function
Origin
A mild but effective functional ingredient. It can emulsify (efficiently mix water and oil) without needing too much in a formula.
Cyclomethicone
Est. %0.3
Function
Origin
A blend of emollient silicones that leaves a smooth and non-greasy after-feel. Unlike other types of oils, it does not leave any residue on the skin, which is part of what makes it so popular.
Dimethicone
Est. %0.3
Function
Origin
The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Phenyl Trimethicone
Est. %0.3
Function
Origin
A silicone fluid that is used as an occlusive moisturizer. It applies smoothly to the skin and reduces the tack associated with organic oils.
Phenoxyethanol
Est. %0.3
Function
Origin
The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Caprylyl Glycol
Est. %0.3
Function
Origin
An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Ethylhexylglycerin
Est. %0.3
Function
Origin
A preservative booster derived from glycerin. It is commonly paired with other preservatives to improve their efficacy. Ethylhexylglycerin is also a humectant due to its chemical base of glycerin.
Hexylene Glycol
Est. %0.3
Function
Origin
A multifunctional ingredient that is best known for its use as a solvent. It can dissolve both water-based ingredients and oils. For this reason, it can also function as an emulsifier, allowing oil and water ingredients to mix and remain stable.