Revlon ColorStay Makeup For Normal/Dry Skin SPF 20

Revlon ColorStay Makeup For Normal/Dry Skin SPF 20
4.2
/ 10
Moisturizing
3.6 Humectancy icon Humectancy
4.7 Occlusivity icon Occlusivity
20
SPF icon
SPF
$$$$

Review

Results you may expect from using Revlon ColorStay Makeup For Normal/Dry Skin SPF 20:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Revlon ColorStay Makeup For Normal/Dry Skin SPF 20:

  • Moderate moisturizing. It has a moisturizing rating of 4.2 out of 10.
  • Adequate sun protection for most daily activities or short periods spent outdoors.

How moisturizing is it?

Quite moisturizing: Revlon ColorStay Makeup For Normal/Dry Skin SPF 20 has a moisturizing rating of 4.2 out of 10.

Is it more humectant or occlusive? This product has relatively comparable levels of humectancy and occlusivity: a moderate humectancy of 3.6 out of 10, primarily due to the substantial concentration of Butylene Glycol (est. ≈3.0%), and a moderate occlusivity of 4.7 out of 10, mainly due to the high content of Trimethylsiloxysilicate (est. ≈6.0%) and Dimethicone (est. ≈2.5%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, Revlon ColorStay Makeup For Normal/Dry Skin SPF 20 has a zero anti-wrinkle rating.

It contains Retinyl Palmitate, an ingredient marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Retinyl Palmitate provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not generate the anti-wrinkle rating.

Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, could deliver some anti-wrinkle effects through its moisturizing action.

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Sun protection

Revlon ColorStay Makeup For Normal/Dry Skin SPF 20 has an SPF of 20 and provides moderate sun protection. This level of protection is generally adequate for most daily activities, such as running errands or spending short periods outdoors. However, if you spend a substantial amount of time outdoors, it is better to use a broad spectrum sunscreen with an SPF 30 or higher.

Ingredients

Est. % Ingredient Origin Functions
60
9
6
4.4
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:

Ratings

All humectants
3.6
3
0.3
0.3
Benchmark
10
All occlusives
9.4
6.0
2.5
0.3
0.3
0.3
Benchmark
20
Moisturizing rating
4.2
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 3.6 10
3.6
3
0.3
0.3
Occlusivity All occlusives 9.4 20
4.7
6.0
2.5
0.3
0.3
0.3
Moisturizing rating
4.2
Ingredient Est. % Benchmark Humectancy
3
0.3
0.3
All humectants 3.6 10
3.6
All humectants
3.6
3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
6
2.5
0.3
0.3
0.3
All occlusives 9.4 20
4.7
All occlusives
9.4
6.0
2.5
0.3
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
n/a
- 0.3 -
Total
0
Retinyl Palmitate
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
0
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
All antioxidants 0.3 3 No
All antioxidants
0.3
Tocopheryl Acetate
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
0.3
All soothing 0.6 5 No
All soothing
0.6
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %60
Function
Origin
The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Cyclomethicone
Est. %9
Function
Origin
A blend of emollient silicones that leaves a smooth and non-greasy after-feel. Unlike other types of oils, it does not leave any residue on the skin, which is part of what makes it so popular.
Trimethylsiloxysilicate
Est. %6
Function
Origin
An occlusive moisturizing and emollient silicone resin that smoothes and softens the appearance of the skin. It also protects a product from rinsing away too easily with water, sweat, or friction.
Titanium Dioxide (CI 77891)
Est. %4.4
Function
Origin
One of two the most commonly used mineral sunscreens. It can absorb UV light, including UVB – which causes burning, tanning, and even skin cancer. Also used as a colorant, titanium dioxide gives a product a bright white color.
Butylene Glycol
Est. %3
Function
Origin
A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.
Dimethicone
Est. %2.5
Function
Origin
The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Zinc Oxide
Est. %2
Function
Origin
A white mineral powder mainly used in skincare as a physical sunscreen. It protects against UVA light that leads to visible signs of aging, including wrinkles and fine lines. Zinc oxide can also be used as a colorant to enhance the whiteness of a product.
Cetyl PEG/PPG-10/1 Dimethicone
Est. %1.5
Function
Origin
A silicone-based powerful emulsifier that helps to create lightweight and pleasant feeling lotions and creams.
Polyglyceryl-4 Isostearate
Est. %1.3
Function
Origin
A synthetic emollient emulsifier that helps oil and water phases to mix.
HDI/Trimethylol Hexyllactone Crosspolymer
Est. %1
Function
Origin
An anticaking agent that prevents a product from forming lumps. It also increases slip and produces an elegant finish in skincare formulations.
Nylon-12
Est. %0.3
Function
Origin
A synthetic powdered ingredient that imparts unique sensorial characteristics due to its microsphere structure. It can also control viscosity by bulking up the oil phase of a skincare product.
Phenyl Trimethicone
Est. %0.3
Function
Origin
A silicone fluid that is used as an occlusive moisturizer. It applies smoothly to the skin and reduces the tack associated with organic oils.
Magnesium Sulfate
Est. %0.3
Function
Origin
A naturally occurring mineral that is commonly used in skincare products as a bulking agent. It helps to control the viscosity of products by making them thicker.
Isododecane
Est. %0.3
Function
Origin
An emollient derived from petroleum with high spreadability. It is often used as a replacement for oils and silicones because it leaves no residue behind on the skin. When a product is labeled as “oil-free” it may contain isododecane instead of heavier oils.
Boron Nitride
Est. %0.3
Function
Origin
A synthetically made compound that has several functions. As an opacifier, it can provide a range of appearances, ranging from translucent to completely opaque. It is also an excellent absorber and is capable of high oil absorption.
Methicone
Est. %0.3
Function
Origin
A silicone oil that can function as an occlusive moisturizer and emollient. Occasionally, methicone is used as a surface modifier for various pigments to improve the longevity and vibrancy of colorants.
Laureth-7
Est. %0.3
Function
Origin
A mild but effective functional ingredient. It can emulsify (efficiently mix water and oil) without needing too much in a formula.
Malva Sylvestris (Mallow) Flower Extract
Est. %0.3
Function
Origin
Description is coming soon
Lilium Candidum Bulb Extract
Est. %0.3
Function
Origin
An extract coming from Madonna lily bulbs that is rich in humectant polysaccharides and anti-inflammatory saponins.
Lactobacillus/Eriodictyon Californicum Ferment Extract
Est. %0.3
Function
Origin
Description is coming soon
Cymbidium Grandiflorum (Orchid) Flower Extract
Est. %0.3
Function
Origin
Description is coming soon
Silk
Est. %0.3
Function
Origin
Description is coming soon
Tocopheryl Acetate
Est. %0.3
Function
Origin

An antioxidant derivative of tocopherol (vitamin E). It helps to protect cells from free radicals and UV damage through the conversion to active vitamin E in the skin. It is more stable than tocopherol.

Retinyl Palmitate
Est. %0.3
Function
Origin
An esterified form of retinol – it combines retinol and palmitic acid into one molecule. Retinyl palmitate is less irritating than retinol but also much less effective in its anti-aging and acne-reducing effects.
Ethylene Brassylate
Est. %0.3
Function
Origin
A synthetic fragrance ingredient known for its musky scent. Like most fragrance ingredients, it can be irritating.
Tribehenin
Est. %0.3
Function
Origin
A soft, pliable wax that serves as an occlusive moisturizer and emollient. It improves the spreadability of skincare products, including the increased payoff of stick products, and imparts a pleasant, smooth feel upon application.
Bisabolol
Est. %0.3
Function
Origin
An anti-inflammatory compound found naturally in German chamomile essential oil. It has a pleasant, sweet, and floral scent. Bisabolol also has soothing and anti-inflammatory properties but can cause an allergic reaction in more sensitive individuals.
Silica
Est. %0.3
Function
Origin
A widely used cosmetic ingredient with the same chemical composition as the sand found on beaches. A common function of silica is its ability to control viscosity. In certain chemical forms, it can effectively thicken cream-style products.
Alumina
Est. %0.3
Function
Origin
A mineral derived from the metal ore known as aluminum. It is commonly used as an abrasive and also acts as a thickening viscosity controlling agent (and thus as a bulking agent). Alumina is also a great opacifier.
Isohexadecane
Est. %0.3
Function
Origin
A clear, colorless liquid that is commonly used as an emollient. It is made up of pure hydrocarbons and leaves a dry feeling on the skin upon application. It also increases the spreadability of a product.
Dimethicone/Silsesquioxane Copolymer
Est. %0.3
Function
Origin
Description is coming soon
Polysorbate 20
Est. %0.3
Function
Origin
A viscous, amber-colored liquid that functions as a solubilizer to disperse small amounts of oil into a large water phase. Polysorbate 20 is frequently used to solubilize fragrance oils into water-based emulsions.
Polysorbate 80
Est. %0.3
Function
Origin
A non-ionic surfactant, which means that it contains no chemical charges. It can be used as a mild cleansing agent in skin cleansing products but is more commonly used for its emulsifying abilities.
Ammonium Polyacryloyldimethyl Taurate
Est. %0.3
Function
Origin
An emulsion stabilizer and thickener with gelling properties. The products containing this ingredient frequently feature lightweight and refreshing aesthetics upon application to the skin.
Sorbitan Sesquioleate
Est. %0.3
Function
Origin
A natural liquid ingredient that is yellow to amber in color and completely transparent. It supports oil and water mixtures and disperses minerals into oils.
Tetrasodium EDTA
Est. %0.3
Function
Origin
One of the most common synthetic chelators. It can reduce the 'hardness' of water and so is often used in rinse-off products.
Phenoxyethanol
Est. %0.3
Function
Origin
The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Methylparaben
Est. %0.3
Function
Origin
A preservative that keeps a product unspoiled. There has been a lot of controversy surrounding parabens, although the concentrations found in cosmetic formulations are generally considered to be safe.
Ethylparaben
Est. %0.3
Function
Origin
A cost-effective preservative that belongs to the group of parabens. There has been a lot of controversy surrounding parabens, although the concentrations found in cosmetic formulations are generally considered to be safe.
Propylparaben
Est. %0.3
Function
Origin
A preservative that keeps a product unspoiled. There has been a lot of controversy surrounding parabens, although the concentrations found in cosmetic formulations are generally considered to be safe.
Iron Oxides (CI 77491)
Est. %0.3
Function
Origin
A red colorant also known as red iron oxide. This is an EU-approved colorant used in a wide variety of products.
Iron Oxides (CI 77492)
Est. %0.3
Function
Origin
Also known as iron (III) oxide, this ingredient is a yellow-colored pigment that can either be derived from minerals or produced synthetically. It adds yellow tones to cosmetic products.
Iron Oxides (CI 77499)
Est. %0.3
Function
Origin
A black colorant also known as black iron oxide used in a wide range of skincare products.
Mica
Est. %0.3
Function
Origin
A mineral powder made up of silicates with several functions (the main one being as a colorant). It has a shimmery appearance, making it highly desirable in certain cosmetic products. Mica also helps the product to apply more smoothly.
Bismuth Oxychloride (CI 77163)
Est. %0.3
Function
Origin
An inorganic colorant that gives off a pearly white sheen. Its appearance is a result of light reflecting and refracting through the layers it forms.