Farmacy Green Defense Daily Mineral Sunscreen SPF 30

Farmacy Green Defense Daily Mineral Sunscreen SPF 30
5.5
/ 10
Moisturizing
7.8 Humectancy icon Humectancy
3.2 Occlusivity icon Occlusivity
30
SPF icon
SPF

Review

Results you may expect from using Farmacy Green Defense Daily Mineral Sunscreen SPF 30:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Farmacy Green Defense Daily Mineral Sunscreen SPF 30:

  • Moderate moisturizing. It has a moisturizing rating of 5.5 out of 10.
  • High sun protection for extended outdoor activities and exposure.

How moisturizing is it?

Quite moisturizing: Farmacy Green Defense Daily Mineral Sunscreen SPF 30 has a moisturizing rating of 5.5 out of 10.

Is it more humectant or occlusive? Rather humectant. It has a high humectancy of 7.8 out of 10, primarily due to the substantial concentration of Pentylene Glycol (est. ≈3.0%) and Propanediol (est. ≈2.0%), and a moderate occlusivity of 3.2 out of 10, mainly due to the significant content of Caprylic/Capric Triglyceride (est. ≈6.0%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, Farmacy Green Defense Daily Mineral Sunscreen SPF 30 has a zero anti-wrinkle rating.

It contains Gluconolactone, an ingredient marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Gluconolactone provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not generate the anti-wrinkle rating.

Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, could deliver some anti-wrinkle effects through its moisturizing action.

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Sun protection

Farmacy Green Defense Daily Mineral Sunscreen SPF 30 has an SPF of 30 and provides high sun protection. This level of protection is ideal for activities such as spending time at the beach, outdoor sports, or other activities involving prolonged sun exposure. It's important to apply sunscreen generously and reapply every two hours or after swimming or sweating to maintain effectiveness.

Ingredients

Est. % Ingredient Origin Functions
50
Water
18.23
Zinc Oxide
6
Caprylic/Capric Triglyceride
4
C13-15 Alkane
3
Pentylene Glycol
2.5
C15-19 Alkane
2
Propanediol
1.5
Moringa Oleifera Leaf Water
1.3
Bis-Diglyceryl Polyacyladipate-2
1
Gluconolactone
0.3
Moringa Oleifera Seed Extract
0.3
Polyacrylate Crosspolymer-6
0.3
Physalis Alkekengi Calyx Extract
0.3
Cetearyl Alcohol
0.3
Beta-Carotene (CI 40800)
0.3
Inositol
0.3
Sodium Dilauramidoglutamide Lysine
0.3
Isostearic Acid
0.3
Polyhydroxystearic Acid
0.3
Lecithin
0.3
Polyglyceryl-3 Polyricinoleate
0.3
Coco-Glucoside
0.3
Polyglycerin-3
0.3
Tocopherol
0.3
Bisabolol
0.3
Polyglyceryl-3 Diisostearate
0.3
Xanthan Gum
0.3
Sodium Citrate
0.3
Sclerotium Gum
0.3
Arachidyl Glucoside
0.3
Citric Acid
0.3
Sodium Benzoate
0.3
Behenyl Alcohol
0.3
Sodium Phytate
0.3
Maltodextrin
0.3
t-Butyl Alcohol
0.3
Arachidyl Alcohol
0.3
Glucose
0.3
Calcium Gluconate
Est. %
Water
Function:
Origin:
Zinc Oxide
Function:
Origin:
Caprylic/Capric Triglyceride
Function:
Origin:
C13-15 Alkane
Function:
Origin:
Pentylene Glycol
Function:
Origin:
C15-19 Alkane
Function:
Origin:
Propanediol
Function:
Origin:
Moringa Oleifera Leaf Water
Function:
Origin:
Bis-Diglyceryl Polyacyladipate-2
Function:
Origin:
Gluconolactone
Function:
Origin:
Moringa Oleifera Seed Extract
Function:
Origin:
Polyacrylate Crosspolymer-6
Function:
Origin:
Physalis Alkekengi Calyx Extract
Function:
Origin:
Cetearyl Alcohol
Function:
Origin:
Beta-Carotene (CI 40800)
Function:
Origin:
Inositol
Function:
Origin:
Sodium Dilauramidoglutamide Lysine
Function:
Origin:
Isostearic Acid
Function:
Origin:
Polyhydroxystearic Acid
Function:
Origin:
Lecithin
Function:
Origin:
Polyglyceryl-3 Polyricinoleate
Function:
Origin:
Coco-Glucoside
Function:
Origin:
Polyglycerin-3
Function:
Origin:
Tocopherol
Function:
Origin:
Bisabolol
Function:
Origin:
Polyglyceryl-3 Diisostearate
Function:
Origin:
Xanthan Gum
Function:
Origin:
Sodium Citrate
Function:
Origin:
Sclerotium Gum
Function:
Origin:
Arachidyl Glucoside
Function:
Origin:
Citric Acid
Function:
Origin:
Sodium Benzoate
Function:
Origin:
Behenyl Alcohol
Function:
Origin:
Sodium Phytate
Function:
Origin:
Maltodextrin
Function:
Origin:
t-Butyl Alcohol
Function:
Origin:
Arachidyl Alcohol
Function:
Origin:
Glucose
Function:
Origin:
Calcium Gluconate
Function:
Origin:

Ratings

All humectants
7.8
3
2
1
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
All occlusives
6.3
6.0
0.3
Benchmark
20
Moisturizing rating
5.5
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 7.8 10
7.8
3
2
1
0.3
0.3
0.3
0.3
0.3
0.3
Occlusivity All occlusives 6.3 20
3.2
6.0
0.3
Moisturizing rating
5.5
Ingredient Est. % Benchmark Humectancy
3
2
1
0.3
0.3
0.3
0.3
0.3
0.3
All humectants 7.8 10
7.8
All humectants
7.8
3
2
1
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
6
0.3
All occlusives 6.3 20
3.2
All occlusives
6.3
6.0
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
n/a
- 1 -
Total
0
Gluconolactone
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
1
Anti-wrinkle rating
0
Ingredient Est. % Benchmark
Rich in Antioxidants
1.5
0.3
0.3
0.3
All antioxidants 2.4 3 No
All antioxidants
2.4
Moringa Oleifera Leaf Water
1.5
Moringa Oleifera Seed Extract
0.3
Beta-Carotene (CI 40800)
0.3
Tocopherol
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
All soothing 0.3 5 No
All soothing
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %50
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Zinc Oxide
Est. %18.23
Function
Origin
Zinc OxideA white mineral powder mainly used in skincare as a physical sunscreen. It protects against UVA light that leads to visible signs of aging, including wrinkles and fine lines. Zinc oxide can also be used as a colorant to enhance the whiteness of a product.
Caprylic/Capric Triglyceride
Est. %6
Function
Origin
Caprylic/Capric TriglycerideA natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss.
C13-15 Alkane
Est. %4
Function
Origin
C13-15 Alkane
Pentylene Glycol
Est. %3
Function
Origin
Pentylene Glycol

A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent.

C15-19 Alkane
Est. %2.5
Function
Origin
C15-19 Alkane
Propanediol
Est. %2
Function
Origin
PropanediolAn excellent solvent capable of mixing water with normally water-insoluble ingredients. It also functions as a humectant due to its water-loving alcohol groups. Propanediol can control the viscosity of a product by reducing its thickness.
Moringa Oleifera Leaf Water
Est. %1.5
Function
Origin
Moringa Oleifera Leaf Water
Bis-Diglyceryl Polyacyladipate-2
Est. %1.3
Function
Origin
Bis-Diglyceryl Polyacyladipate-2An emollient ester that is used as a non-animal substitute for lanolin. Similar to lanolin, it melts at body temperature, making it ideal for use in body butters, lip balms, and ointments.
Gluconolactone
Est. %1
Function
Origin
GluconolactoneA PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.
Moringa Oleifera Seed Extract
Est. %0.3
Function
Origin
Moringa Oleifera Seed ExtractAn extract derived from the seeds of a bush native to Northern India. It contains antioxidant, antimicrobial, and astringent organic acids, flavonoids, and alkaloids.
Polyacrylate Crosspolymer-6
Est. %0.3
Function
Origin
Polyacrylate Crosspolymer-6A polymeric ingredient that works best in water-based formulas to create gel textures. It helps to stabilize emulsions and control viscosity.
Physalis Alkekengi Calyx Extract
Est. %0.3
Function
Origin
Physalis Alkekengi Calyx Extract
Cetearyl Alcohol
Est. %0.3
Function
Origin
Cetearyl AlcoholA blend of cetyl alcohol and stearyl alcohol, the fatty alcohols that are derived from palm oil. It helps to create emulsions that give off a soft and silky emollient feel and also increase product thickness.
Beta-Carotene (CI 40800)
Est. %0.3
Function
Origin
Beta-Carotene (CI 40800)An orange-red plant pigment with powerful antioxidant activity.
Inositol
Est. %0.3
Function
Origin
InositolA humectant moisturizing, sugar-like compound that is present in all the cells of the body, but especially the brain. It is manufactured from sugar beets or carob tree pods for skincare purposes.
Sodium Dilauramidoglutamide Lysine
Est. %0.3
Function
Origin
Sodium Dilauramidoglutamide Lysine
Isostearic Acid
Est. %0.3
Function
Origin
Isostearic AcidA saturated fatty acid used to mix oil and water and to remove dirt from the skin's surface. Isostearic acid is listed among common comedogenic ingredients by acne.org.
Polyhydroxystearic Acid
Est. %0.3
Function
Origin
Polyhydroxystearic AcidA soft and malleable amber wax naturally derived from vegetable sources. It allows minerals to be very finely dispersed, which can improve SPF, decrease the white cast in sunscreens, and increase the color expression in pigmented products.
Lecithin
Est. %0.3
Function
Origin
LecithinA humectant, emollient, and emulsifier best suited for water-in-oil emulsions. Lecithin can come from sunflowers, soy, and eggs. The downside to lecithin is that it causes an extra burden on the formula’s preservative because it is nutritious.
Polyglyceryl-3 Polyricinoleate
Est. %0.3
Function
Origin
Polyglyceryl-3 Polyricinoleate
Coco-Glucoside
Est. %0.3
Function
Origin
Coco-GlucosideA mild cleansing and foaming agent. It can be used on its own as a gentle cleanser in a skin cleansing product or can be combined with more powerful cleansing agents, called anionic surfactants, to make them milder on the skin.
Polyglycerin-3
Est. %0.3
Function
Origin
Polyglycerin-3
Tocopherol
Est. %0.3
Function
Origin
Tocopherol

Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.

Bisabolol
Est. %0.3
Function
Origin
BisabololAn anti-inflammatory compound found naturally in German chamomile essential oil. It has a pleasant, sweet, and floral scent. Bisabolol also has soothing and anti-inflammatory properties but can cause an allergic reaction in more sensitive individuals.
Polyglyceryl-3 Diisostearate
Est. %0.3
Function
Origin
Polyglyceryl-3 DiisostearateA vegetable-based ingredient that stabilizes mixtures of oil and water.
Xanthan Gum
Est. %0.3
Function
Origin
Xanthan GumA natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.
Sodium Citrate
Est. %0.3
Function
Origin
Sodium CitrateA salt of citric acid that has a salty and tart flavor and is used as a fragrance. It is mildly basic, meaning that its addition to a skincare product can adjust the pH upward.
Sclerotium Gum
Est. %0.3
Function
Origin
Sclerotium GumA thickener with a silky, velvety feel that many manufacturers use as an alternative to silicones.
Arachidyl Glucoside
Est. %0.3
Function
Origin
Arachidyl GlucosideA mild cleanser and emulsifier that helps oil and water to mix and form emulsions.
Citric Acid
Est. %0.3
Function
Origin
Citric AcidA gently exfoliating AHA that helps to remove the top layer of dead skin cells. In comparison to other AHAs, citric acid has been shown to be one of the least effective. It is also very commonly used as a stabilizing and pH-controlling agent.
Sodium Benzoate
Est. %0.3
Function
Origin
Sodium BenzoateA preservative that usually works in combination with other preservatives. It has to be at low pH (<5.5) to be effective.
Behenyl Alcohol
Est. %0.3
Function
Origin
Behenyl AlcoholA fatty alcohol with emollient properties. It is used as a co-emulsifier and thickener and tends to result in a product with a smooth and creamy application texture.
Sodium Phytate
Est. %0.3
Function
Origin
Sodium PhytateSodium phytate is a chelating agent that serves to remove heavy metal ions from water. Removing metal ions helps other ingredients, such as antioxidants and preservatives, to perform better and keep products from separating.
Maltodextrin
Est. %0.3
Function
Origin
MaltodextrinA formula helper manufactured from starch. It has a sweet flavor and is often used in rinse-off products to support their foaming structure. Maltodextrin is also used to stabilize emulsions and to absorb and bind other ingredients in the formula.
t-Butyl Alcohol
Est. %0.3
Function
Origin
t-Butyl Alcohol
Arachidyl Alcohol
Est. %0.3
Function
Origin
Arachidyl AlcoholA non-drying fatty alcohol that functions as an emollient, emulsion stabilizer, and viscosity controlling agent. It also produces a mattifying effect when applied in a skincare product onto the skin.
Glucose
Est. %0.3
Function
Origin
GlucoseA simple sugar that is also one of two components of sucrose, or table sugar. It is used as a humectant in skincare products. Glucose is also used to flavor lip care cosmetics because of its mildly sweet taste.
Calcium Gluconate
Est. %0.3
Function
Origin
Calcium GluconateA white crystalline powder that can act as a humectant when dissolved into water. It is also a chelating agent.