Perricone MD High Potency Classics: Face Finishing & Firming Moisturizer Tint SPF 30

Perricone MD High Potency Classics: Face Finishing & Firming Moisturizer Tint SPF 30
5.9
/ 10
Moisturizing
10.0 Humectancy icon Humectancy
1.8 Occlusivity icon Occlusivity
30
SPF icon
SPF
$$$$

Review

Results you may expect from using Perricone MD High Potency Classics: Face Finishing & Firming Moisturizer Tint SPF 30:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Perricone MD High Potency Classics: Face Finishing & Firming Moisturizer Tint SPF 30:

  • Moderate moisturizing. It has a moisturizing rating of 5.9 out of 10.
  • High sun protection for extended outdoor activities and exposure.

How moisturizing is it?

Quite moisturizing: Perricone MD High Potency Classics: Face Finishing & Firming Moisturizer Tint SPF 30 has a moisturizing rating of 5.9 out of 10.

Is it more humectant or occlusive? Significantly more humectant. It has a low occlusivity of 1.8 out of 10 and a maximum humectancy of 10 out of 10, primarily due to the high content of Glycerin (est. ≈9.0%) and Pentylene Glycol (est. ≈2.5%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, Perricone MD High Potency Classics: Face Finishing & Firming Moisturizer Tint SPF 30 has a zero anti-wrinkle rating.

It contains Tetrahexyldecyl Ascorbate, an ingredient marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Tetrahexyldecyl Ascorbate provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not generate the anti-wrinkle rating.

Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, could deliver some anti-wrinkle effects through its moisturizing action.

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Sun protection

Perricone MD High Potency Classics: Face Finishing & Firming Moisturizer Tint SPF 30 has an SPF of 30 and provides high sun protection. This level of protection is ideal for activities such as spending time at the beach, outdoor sports, or other activities involving prolonged sun exposure. It's important to apply sunscreen generously and reapply every two hours or after swimming or sweating to maintain effectiveness.

Ingredients

Est. % Ingredient Origin Functions
60
9
6
4.2
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:

Ratings

All humectants
11.8
9
2.5
0.3
Benchmark
10
All occlusives
3.6
3.0
0.3
0.3
Benchmark
20
Moisturizing rating
5.9
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 11.8 10
10.0
9
2.5
0.3
Occlusivity All occlusives 3.6 20
1.8
3.0
0.3
0.3
Moisturizing rating
5.9
Ingredient Est. % Benchmark Humectancy
9
2.5
0.3
All humectants 11.8 10
10
All humectants
11.8
9
2.5
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
3
0.3
0.3
All occlusives 3.6 20
1.8
All occlusives
3.6
3.0
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
n/a
- 0.3 -
Total
0
Tetrahexyldecyl Ascorbate
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
0
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
0.3
All antioxidants 1.2 3 No
All antioxidants
1.2
Diethylhexyl Syringylidenemalonate
0.3
Tetrahexyldecyl Ascorbate
0.3
Thioctic Acid
0.3
Astaxanthin
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
0.3
All soothing 0.6 5 No
All soothing
0.6
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %60
Function
Origin
The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Glycerin
Est. %9
Function
Origin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Cyclopentasiloxane
Est. %6
Function
Origin
A lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in.
Titanium Dioxide (CI 77891)
Est. %4.2
Function
Origin
One of two the most commonly used mineral sunscreens. It can absorb UV light, including UVB – which causes burning, tanning, and even skin cancer. Also used as a colorant, titanium dioxide gives a product a bright white color.
Dimethicone
Est. %3
Function
Origin
The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Pentylene Glycol
Est. %2.5
Function
Origin

A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent.

Ethylhexyl Methoxycrylene
Est. %2
Function
Origin
Description is coming soon
Polyester-8
Est. %1.5
Function
Origin
Description is coming soon
Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone
Est. %1.3
Function
Origin
Description is coming soon
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Est. %1
Function
Origin
An emulsion stabilizer and thickener that helps to create a pleasant, satiny, and light formula texture. It works by forming a gel-like network within water or oil, which both stabilizes other ingredients and produces a thickening effect.
Benzyl Alcohol
Est. %0.3
Function
Origin
A multifunctional ingredient that is supplied as a clear, colorless liquid. Its main function is as a flavoring agent and fragrance. It also acts as a broad-spectrum preservative, solvent, and viscosity-controlling agent that thins the product.
Aluminum Hydroxide
Est. %0.3
Function
Origin
A white mineral powder, also known as alumina, that is derived from aluminum metal. It is frequently used as an abrasive in exfoliating products and as a thickener. Aluminum oxide is also a great opacifier.
Stearic Acid
Est. %0.3
Function
Origin
A saturated fatty acid found in vegetable butter and animal fats. It is an occlusive moisturizing and emollient ingredient and also helps to maintain the barrier function of the skin.
Iron Oxides (CI 77491)
Est. %0.3
Function
Origin
A red colorant also known as red iron oxide. This is an EU-approved colorant used in a wide variety of products.
Iron Oxides (CI 77492)
Est. %0.3
Function
Origin
Also known as iron (III) oxide, this ingredient is a yellow-colored pigment that can either be derived from minerals or produced synthetically. It adds yellow tones to cosmetic products.
Iron Oxides (CI 77499)
Est. %0.3
Function
Origin
A black colorant also known as black iron oxide used in a wide range of skincare products.
Diethylhexyl Syringylidenemalonate
Est. %0.3
Function
Origin
Description is coming soon
Hydrogenated Lecithin
Est. %0.3
Function
Origin
A version of plain lecithin that has been saturated with hydrogen atoms. This ingredient can be derived from plants, like soy or sunflower, from egg yolks, or made synthetically. Its major function is to emulsify water and oils.
Isohexadecane
Est. %0.3
Function
Origin
A clear, colorless liquid that is commonly used as an emollient. It is made up of pure hydrocarbons and leaves a dry feeling on the skin upon application. It also increases the spreadability of a product.
Bisabolol
Est. %0.3
Function
Origin
An anti-inflammatory compound found naturally in German chamomile essential oil. It has a pleasant, sweet, and floral scent. Bisabolol also has soothing and anti-inflammatory properties but can cause an allergic reaction in more sensitive individuals.
Mica
Est. %0.3
Function
Origin
A mineral powder made up of silicates with several functions (the main one being as a colorant). It has a shimmery appearance, making it highly desirable in certain cosmetic products. Mica also helps the product to apply more smoothly.
Tetrahexyldecyl Ascorbate
Est. %0.3
Function
Origin
A lipid-soluble form of vitamin C that is more stable and less irritating than ascorbic acid. According to a recent clinical study, THDA has all the capabilities of regular vitamin C, including anti-wrinkle and anti-pigment activity.
Phenoxyethanol
Est. %0.3
Function
Origin
The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Silica Dimethyl Silylate
Est. %0.3
Function
Origin
A synthetic 'filler' powder primarily used as a formula helper. It is added in skincare products to adjust their consistency and thickness.
Polyester-1
Est. %0.3
Function
Origin
Description is coming soon
Polysilicone-11
Est. %0.3
Function
Origin
A synthetic rubber-like substance of the silicone family that has no color or distinct scent. These are large molecules that cannot penetrate the skin but instead create a thin silky film on the skin's surface.
Polysorbate 60
Est. %0.3
Function
Origin
An ester based on sorbitan. It is good for emulsifying water and oils together – specifically making oil-in-water emulsions. Polysorbate 60 is also said to give a product a notable fragrance.
Caprylic/Capric Triglyceride
Est. %0.3
Function
Origin
A natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss.
Sodium Benzoate
Est. %0.3
Function
Origin
A preservative that usually works in combination with other preservatives. It has to be at low pH (<5.5) to be effective.
Potassium Sorbate
Est. %0.3
Function
Origin
A preservative widely used in food and personal care products, available from natural sources or synthetically produced. Potassium sorbate works by inhibiting the growth of yeasts, molds, and some bacteria.
Fragrance
Est. %0.3
Function
Origin
Under trade secret law, manufacturers have the right not to disclose what exactly went into the fragrance and use the unspecific word Fragrance or Parfum instead. Many fragrances are highly allergenic.
Xanthan Gum
Est. %0.3
Function
Origin
A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.
Hydrogenated Phosphatidylcholine
Est. %0.3
Function
Origin
Description is coming soon
Citronellol
Est. %0.3
Function
Origin
A fragrant compound found naturally in many essential oils (mainly lemongrass). It can have a lemon or a rose scent. People with sensitive skin should try to avoid products with citronellol, or at least do a patch test before using it.
Thioctic Acid
Est. %0.3
Function
Origin
Description is coming soon
Geraniol
Est. %0.3
Function
Origin
A fragrant, volatile, plant-based, liquid chemical that can be naturally found in many essential oils (specifically rose, palmarosa, citronella). It has a rose-like scent. It is a potential irritant and may cause an allergic reaction in some people.
Astaxanthin
Est. %0.3
Function
Origin
A red natural pigment from the family of antioxidant carotenoids that occurs in many natural sources such as lobster and algae. It is mainly used as a colorant and soothing ingredient.
Hydroxycitronellal
Est. %0.3
Function
Origin
A fragrant compound with a scent reminiscent of lilies and sweet tropical melon. It can be found in many different essential oils (such as palmarosa, ylang-ylang, and lemongrass essential oil) but is manufactured synthetically from citronellal.
Butylphenyl Methylpropional
Est. %0.3
Function
Origin
A synthetic fragrance ingredient used to recreate the scent of lilies, this ingredient also features fresh, green, and powdery notes. Butylphenyl Methylpropional was recently labeled as Toxic to Reproduction in the EU and will be banned in 2022.