Neutrogena Rapid Firming Peptide Contour Lift Face Cream

Neutrogena Rapid Firming Peptide Contour Lift Face Cream
7.2
/ 10
Moisturizing
10.0 Humectancy icon Humectancy
4.5 Occlusivity icon Occlusivity
0.4Anti-wrinkle icon/ 10
Anti-wrinkle

Review

Does Neutrogena Rapid Firming Peptide Contour Lift Face Cream work?

Based on the ingredient list analysis by CreamScan AI, these are the key benefits you can expect from using Neutrogena Rapid Firming Peptide Contour Lift Face Cream:

  • Significant moisturizing. It has a moisturizing rating of 7.2 out of 10.
  • Little anti-wrinkle effect: Neutrogena Rapid Firming Peptide Contour Lift Face Cream has an anti-wrinkle rating of 0.4 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.

Perfect moisturizer for normal to dry skin with a relatively lightweight texture

According to CreamScan analysis, Neutrogena Rapid Firming Peptide Contour Lift Face Cream is highly moisturizing, with a moisturizing rating of 7.2 out of 10.

Is it more humectant or occlusive? Significantly more humectant. It has a maximum humectancy of 10 out of 10, primarily due to the substantial concentration of Gluconolactone (est. ≈4.0%) and Glycerin (est. ≈3.0%), and a moderate occlusivity of 4.5 out of 10, mainly due to the high content of Caprylic/Capric Triglyceride (est. ≈6.0%).

This type of moisturizer is ideal for people with normal skin. It combines a high concentration of humectants with a significant amount of occlusive ingredients to deliver effective dual-action moisturizing for normal skin.

This product may also be a good choice for people with normal to dry skin for daily hydration, as it balances significant moisturizing potential with a relatively lightweight texture.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Little anti-wrinkle efficacy

According to CreamScan analysis, Neutrogena Rapid Firming Peptide Contour Lift Face Cream has a minimal anti-wrinkle rating of 0.4 out of 10.

It contains one ingredient with proven anti-wrinkle efficacy: Glycolic Acid (est. ≈1.3%), 
 a highly effective ingredient in peelings but with moderate anti-wrinkle efficacy in leave-on skincare products, as supported by a single clinical study. This study, involving 72 participants (Thibault et al.), demonstrated that a lotion with 5% GA reduced the fine wrinkling score by 6% after 34 days of use, compared to a vehicle (the same formulation without GA).
 
Among others, Neutrogena Rapid Firming Peptide Contour Lift Face Cream also contains Gluconolactone, an ingredient often marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Gluconolactone provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not contribute to the anti-wrinkle rating.
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, can deliver some anti-wrinkle effects through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Ingredients

Est. % Ingredient Origin Functions
60
9
6
4
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Water
Function:
Origin:
Isohexadecane
Function:
Origin:
Caprylic/Capric Triglyceride
Function:
Origin:
Gluconolactone
Function:
Origin:
Glycerin
Function:
Origin:
Propanediol
Function:
Origin:
Ammonium Acryloyldimethyltaurate/VP Copolymer
Function:
Origin:
Hydrogenated Palm Kernel Glycerides
Function:
Origin:
Glycolic Acid
Function:
Origin:
Glyceryl Stearate SE
Function:
Origin:
Glyceryl Dilaurate
Function:
Origin:
Acetyl Dipeptide-31 Amide
Function:
Origin:
Dimethicone
Function:
Origin:
Acetyl Tyrosinamide
Function:
Origin:
Butyrospermum Parkii (Shea) Butter
Function:
Origin:
Cetearyl Alcohol
Function:
Origin:
Dimethicone/Bis-Isobutyl PPG-20 Crosspolymer
Function:
Origin:
C12-15 Alkyl Benzoate
Function:
Origin:
Stearalkonium Hectorite
Function:
Origin:
PEG-100 Stearate
Function:
Origin:
Steareth-10
Function:
Origin:
Biosaccharide Gum-1
Function:
Origin:
Methyl Decenol
Function:
Origin:
Hydrogenated Palm Glycerides
Function:
Origin:
Isocetyl Stearoyl Stearate
Function:
Origin:
Tocopheryl Acetate
Function:
Origin:
Dimethicone/Vinyl Dimethicone Crosspolymer
Function:
Origin:
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Function:
Origin:
Squalane
Function:
Origin:
Isostearic Acid
Function:
Origin:
Propylene Carbonate
Function:
Origin:
Glyceryl Stearate
Function:
Origin:
Sclerotium Gum
Function:
Origin:
Caprylyl Glycol
Function:
Origin:
PEG-40 Stearate
Function:
Origin:
Sodium Hydroxide
Function:
Origin:
Polysorbate 60
Function:
Origin:
Isopropyl Myristate
Function:
Origin:
Ceteareth-20
Function:
Origin:
Isobutyl Methyl Tetrahydropyranol
Function:
Origin:
Sorbitan Isostearate
Function:
Origin:
Isoceteth-10
Function:
Origin:
Silica
Function:
Origin:
Disodium EDTA
Function:
Origin:
Methyldihydrojasmonate
Function:
Origin:
Ethylene Brassylate
Function:
Origin:
Phenoxyethanol
Function:
Origin:
Chlorphenesin
Function:
Origin:

Ratings

All humectants
10.1
4
3
2.5
0.3
0.3
Benchmark
10
All occlusives
9.0
6.0
1.5
0.3
0.3
0.3
0.3
0.3
Benchmark
20
Moisturizing rating
7.2
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 10.1 10
10.0
4
3
2.5
0.3
0.3
Occlusivity All occlusives 9.0 20
4.5
6.0
1.5
0.3
0.3
0.3
0.3
0.3
Moisturizing rating
7.2
Ingredient Est. % Benchmark Humectancy
4
3
2.5
0.3
0.3
All humectants 10.1 10
10
All humectants
10.1
4
3
2.5
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
6
1.5
0.3
0.3
0.3
0.3
0.3
All occlusives 9.0 20
4.5
All occlusives
9.0
6.0
1.5
0.3
0.3
0.3
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
1.5 /10 5 1.3 0.4
n/a
- 4 -
Total
0.4
Glycolic Acid
0.4
Ingredient anti-wrinkle power
1.5 /10
when present at, %
5
in this formula, est. %
1.3
Gluconolactone
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
4
Anti-wrinkle rating
0.4
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
All antioxidants 0.3 3 No
All antioxidants
0.3
Tocopheryl Acetate
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
All soothing 0.3 5 No
All soothing
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %60
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Isohexadecane
Est. %9
Function
Origin
IsohexadecaneA clear, colorless liquid that is commonly used as an emollient. It is made up of pure hydrocarbons and leaves a dry feeling on the skin upon application. It also increases the spreadability of a product.
Caprylic/Capric Triglyceride
Est. %6
Function
Origin
Caprylic/Capric TriglycerideA natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss.
Gluconolactone
Est. %4
Function
Origin
GluconolactoneA PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.
Glycerin
Est. %3
Function
Origin
Glycerin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Propanediol
Est. %2.5
Function
Origin
PropanediolAn excellent solvent capable of mixing water with normally water-insoluble ingredients. It also functions as a humectant due to its water-loving alcohol groups. Propanediol can control the viscosity of a product by reducing its thickness.
Ammonium Acryloyldimethyltaurate/VP Copolymer
Est. %2
Function
Origin
Ammonium Acryloyldimethyltaurate/VP CopolymerA polymeric ingredient that creates lightweight and refreshing gel textures. It also works as a viscosity controlling agent.
Hydrogenated Palm Kernel Glycerides
Est. %1.5
Function
Origin
Hydrogenated Palm Kernel GlyceridesA solid, emollient fat processed from palm kernel oil. It acts as an occlusive moisturizer and is aimed at very dry skin.
Glycolic Acid
Est. %1.3
Function
Origin
Glycolic Acid

The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums.

Glyceryl Stearate SE
Est. %1
Function
Origin
Glyceryl Stearate SEAn emulsifier, where the SE stands for self-emulsifying. Emulsions containing glyceryl stearate SE often impart a smooth, velvety feel upon the skin.
Glyceryl Dilaurate
Est. %0.3
Function
Origin
Glyceryl Dilaurate
Acetyl Dipeptide-31 Amide
Est. %0.3
Function
Origin
Acetyl Dipeptide-31 Amide
Dimethicone
Est. %0.3
Function
Origin
DimethiconeThe most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Acetyl Tyrosinamide
Est. %0.3
Function
Origin
Acetyl Tyrosinamide
Butyrospermum Parkii (Shea) Butter
Est. %0.3
Function
Origin
Butyrospermum Parkii (Shea) ButterA semi-solid, buttery fat extracted from the seeds of the Shea tree that is a wonderful occlusive and emollient ingredient mainly comprised of fatty acids. Shea butter contains a large amount of anti-inflammatory and antioxidant compounds.
Cetearyl Alcohol
Est. %0.3
Function
Origin
Cetearyl AlcoholA blend of cetyl alcohol and stearyl alcohol, the fatty alcohols that are derived from palm oil. It helps to create emulsions that give off a soft and silky emollient feel and also increase product thickness.
Dimethicone/Bis-Isobutyl PPG-20 Crosspolymer
Est. %0.3
Function
Origin
Dimethicone/Bis-Isobutyl PPG-20 Crosspolymer
C12-15 Alkyl Benzoate
Est. %0.3
Function
Origin
C12-15 Alkyl BenzoateA synthetic emollient ester. It works to improve the appearance of the skin by filling in the microcracks on the surface, thereby making the skin appear softer and smoother. It imparts a lightweight, velvety feel.
Stearalkonium Hectorite
Est. %0.3
Function
Origin
Stearalkonium Hectorite
PEG-100 Stearate
Est. %0.3
Function
Origin
PEG-100 StearateThis surfactant is more specifically classified as an emulsifier that produces oil-in-water emulsions. PEG-100 stearate can also be used as a cleansing agent.
Steareth-10
Est. %0.3
Function
Origin
Steareth-10
Biosaccharide Gum-1
Est. %0.3
Function
Origin
Biosaccharide Gum-1A polysaccharide with humectant moisturizing and soothing properties.
Methyl Decenol
Est. %0.3
Function
Origin
Methyl Decenol
Hydrogenated Palm Glycerides
Est. %0.3
Function
Origin
Hydrogenated Palm GlyceridesAn occlusive ingredient that can be used as a replacement for petrolatum/petroleum jelly. This locks in moisture and prevents TEWL.
Isocetyl Stearoyl Stearate
Est. %0.3
Function
Origin
Isocetyl Stearoyl Stearate
Tocopheryl Acetate
Est. %0.3
Function
Origin
Tocopheryl Acetate

An antioxidant derivative of tocopherol (vitamin E). It helps to protect cells from free radicals and UV damage through the conversion to active vitamin E in the skin. It is more stable than tocopherol.

Dimethicone/Vinyl Dimethicone Crosspolymer
Est. %0.3
Function
Origin
Dimethicone/Vinyl Dimethicone CrosspolymerThis ingredient can refer to several kinds of dimethicone crosspolymers. Like other silicones, it makes products feel slippery and non-greasy but can also increase the thickness or improve the water-resistance of a formula.
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Est. %0.3
Function
Origin
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate CopolymerAn emulsion stabilizer and thickener that helps to create a pleasant, satiny, and light formula texture. It works by forming a gel-like network within water or oil, which both stabilizes other ingredients and produces a thickening effect.
Squalane
Est. %0.3
Function
Origin
SqualaneAn occlusive moisturizing and emollient compound that forms part of the skin’s sebum. The main source of squalane had always been shark liver. Now, however, it is manufactured synthetically or derived from plant oils, such as olive and peanut oil.
Isostearic Acid
Est. %0.3
Function
Origin
Isostearic AcidA saturated fatty acid used to mix oil and water and to remove dirt from the skin's surface. Isostearic acid is listed among common comedogenic ingredients by acne.org.
Propylene Carbonate
Est. %0.3
Function
Origin
Propylene CarbonateA derivative of propylene glycol that is used most frequently as a solvent. Additionally, propylene carbonate serves as a viscosity controlling agent reducing the thickness of the products it is added to.
Glyceryl Stearate
Est. %0.3
Function
Origin
Glyceryl StearateAn emollient and emulsifier typically derived from vegetable sources through a chemical reaction with glycerin. It provides stability, texture, and consistency to formulations. Its main function is to allow oil and water to mix.
Sclerotium Gum
Est. %0.3
Function
Origin
Sclerotium GumA thickener with a silky, velvety feel that many manufacturers use as an alternative to silicones.
Caprylyl Glycol
Est. %0.3
Function
Origin
Caprylyl GlycolAn emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
PEG-40 Stearate
Est. %0.3
Function
Origin
PEG-40 StearateThis PEG, or polyethylene glycol, is excellent at emulsifying water and oil together to form oil-in-water emulsions. Due to its water-loving nature, PEG-40 stearate can also act as a cleansing agent.
Sodium Hydroxide
Est. %0.3
Function
Origin
Sodium Hydroxide

An ingredient that is able to bring the pH of a product up, thereby making it less harsh on the skin.

Polysorbate 60
Est. %0.3
Function
Origin
Polysorbate 60An ester based on sorbitan. It is good for emulsifying water and oils together – specifically making oil-in-water emulsions. Polysorbate 60 is also said to give a product a notable fragrance.
Isopropyl Myristate
Est. %0.3
Function
Origin
Isopropyl MyristateA fast-spreading, cost-effective, non-greasy emollient that is typically used for lubrication, spreadability, or to remove “tackiness” from a product. Isopropyl Myristate is listed as a common comedogenic ingredient by acne.org.
Ceteareth-20
Est. %0.3
Function
Origin
Ceteareth-20A fatty alcohol emulsifier that helps to mix oil and water together, best for oil-in-water emulsions. It is also a cleansing agent. When combined with cetearyl alcohol, ceteareth-20 forms a mix that, according to acne.org, can be comedogenic.
Isobutyl Methyl Tetrahydropyranol
Est. %0.3
Function
Origin
Isobutyl Methyl Tetrahydropyranol
Sorbitan Isostearate
Est. %0.3
Function
Origin
Sorbitan IsostearateA mild yet powerful emulsifier primarily utilized to produce water-in-oil emulsions. It helps to create a particularly rich and substantial emulsion.
Isoceteth-10
Est. %0.3
Function
Origin
Isoceteth-10
Silica
Est. %0.3
Function
Origin
SilicaA widely used cosmetic ingredient with the same chemical composition as the sand found on beaches. A common function of silica is its ability to control viscosity. In certain chemical forms, it can effectively thicken cream-style products.
Disodium EDTA
Est. %0.3
Function
Origin
Disodium EDTAA synthetic chelator that helps to maintain the look and smell of a product by 'locking up' troublesome metal ions.
Methyldihydrojasmonate
Est. %0.3
Function
Origin
Methyldihydrojasmonate
Ethylene Brassylate
Est. %0.3
Function
Origin
Ethylene BrassylateA synthetic fragrance ingredient known for its musky scent. Like most fragrance ingredients, it can be irritating.
Phenoxyethanol
Est. %0.3
Function
Origin
PhenoxyethanolThe most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Chlorphenesin
Est. %0.3
Function
Origin
ChlorphenesinA preservative and broad-spectrum antimicrobial agent that protects products from a wide range of bacteria and fungi.