Glo Skin Beauty Glycolic Resurfacing Cream | Unbiased Skincare Efficacy Review by AI

Review

Does Glo Skin Beauty Glycolic Resurfacing Cream Work?

According to CreamScan AI's analysis of the ingredient list, here’s what Glo Skin Beauty Glycolic Resurfacing Cream has to offer:

Light moisturizing. It has a moisturizing rating of 2.1 out of 10.

Slight anti-wrinkle effect: Glo Skin Beauty Glycolic Resurfacing Cream has an anti-wrinkle rating of 1.5 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.

Key Benefits of Glo Skin Beauty Glycolic Resurfacing Cream

These are the key benefits you can expect from using Glo Skin Beauty Glycolic Resurfacing Cream:

Slight Moisturizing When Used Alone

According to CreamScan analysis, Glo Skin Beauty Glycolic Resurfacing Cream is lightly moisturizing, with a moisturizing rating of 2.1 out of 10.

Is it more humectant or occlusive? This product has relatively comparable levels of Humectancy and Occlusivity: a low Humectancy of 1.8 out of 10 and a low Occlusivity of 2.4 out of 10.

This type of product provides relatively light moisturizing on its own but can contribute to overall moisturizing efficacy when used as part of a skincare routine, alongside another moisturizer.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Slight Anti-Wrinkle Efficacy

According to CreamScan analysis, Glo Skin Beauty Glycolic Resurfacing Cream has a slight anti-wrinkle rating of 1.5 out of 10.

It contains one ingredient with proven anti-wrinkle efficacy: Glycolic Acid (est. ≈10.0%),

a highly effective ingredient in peelings but with moderate anti-wrinkle efficacy in leave-on skincare products, as supported by a single clinical study. This study, involving 72 participants (Thibault et al.), demonstrated that a lotion with 5% GA reduced the fine wrinkling score by 6% after 34 days of use, compared to a vehicle (the same formulation without GA).

Among others, Glo Skin Beauty Glycolic Resurfacing Cream also contains Camellia Sinensis Leaf Extract, an ingredient often marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Camellia Sinensis Leaf Extract provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not contribute to the anti-wrinkle rating.

Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, can deliver some anti-wrinkle effects through its moisturizing action.

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Please note that this is not a complete list of benefits. We are in the process of enhancing our AI model to incorporate anti-pigmentation, exfoliation and anti-acne ratings.

Things to Be Aware Of: Glo Skin Beauty Glycolic Resurfacing Cream

CreamScan AI identified a few things to consider before adding Glo Skin Beauty Glycolic Resurfacing Cream to your skincare routine:

May Increase Skin Photosensitivity Due to Glycolic Acid

This product contains glycolic acid, a popular AHA known for its ability to exfoliate and brighten the skin. Its action works by removing dead skin cells, revealing new, more delicate skin that is particularly vulnerable to sun damage.

As a result, using products with glycolic acid, regardless of concentration, may increase the skin's sensitivity, making it more prone to sunburn or irritation when exposed to UV rays.

To counteract this increased sun sensitivity, apply a broad-spectrum sunscreen with at least SPF 30 daily to protect your skin during glycolic acid treatment.

Please always check the manufacturer's instructions for using the product, either on their website or product label.

As a Standalone Moisturizer, It Has Relatively Low Moisturizing Potential

If you use Glo Skin Beauty Glycolic Resurfacing Cream for moisturizing purposes, please keep in mind that it provides relatively light moisturizing on its own, and, more importantly, it’s not optimal for any skin type.

On one hand, it has low occlusivity, which suits oily and combination skin. On the other hand, it has a low estimated concentration of humectants, which are essential for effective moisturizing of all skin types, including oily skin.

Therefore, if used as a standalone moisturizer, this product should be paired with a humectant-rich moisturizer for optimal skin hydration.

Pros & Cons of Glo Skin Beauty Glycolic Resurfacing Cream

Here’s an overview of the pros and cons of Glo Skin Beauty Glycolic Resurfacing Cream to help you decide if it’s the right choice for your skincare routine:

Pros:

Provides relatively light moisturizing on its own but can contribute to the moisturizing efficacy of any skincare routine

Provides slight anti-wrinkle efficacy

Cons:

May increase skin photosensitivity due to glycolic acid

Minimal moisturizing efficacy, even for oily skin - something to keep in mind if this is the only moisturizer in your routine.

Ingredients

Est. % The Estimated % is our algorithm-based assumption about an ingredient's concentration in a formula. Learn more The Estimated % is our algorithm-based assumption about an ingredient's concentration in a formula. Learn more	Ingredient	Origin	Functions
65	Water The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients. Water The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.	Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water.	Formula helper Solvent – a liquid that dissolves other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients.
10 Verified concentration of an ingredient as indicated on its package, in the ingredient list, or on the official website. Verified concentration of an ingredient as indicated on its package, in the ingredient list, or on the official website.	Glycolic Acid The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums. Glycolic Acid The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Formula helper pH adjuster – alters the pH level of a formula. Formula helper pH adjuster – alters the pH level of a formula.
6	Cetearyl Alcohol A blend of cetyl alcohol and stearyl alcohol, the fatty alcohols that are derived from palm oil. It helps to create emulsions that give off a soft and silky emollient feel and also increase product thickness. Cetearyl Alcohol A blend of cetyl alcohol and stearyl alcohol, the fatty alcohols that are derived from palm oil. It helps to create emulsions that give off a soft and silky emollient feel and also increase product thickness.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Emulsifying – helps to mix water and oil together. Emulsion stabilizing – increases the stability of a formula. Foaming – creates foam of varying densities. Opacifying – reflects light and creates opaque products. Viscosity controlling – changes the thickness of a product. Formula helper Emulsifying – helps to mix water and oil together. Emulsion stabilizing – increases the stability of a formula. Foaming – creates foam of varying densities. Opacifying – reflects light and creates opaque products. Viscosity controlling – changes the thickness of a product.
4	Ceteareth-20 A fatty alcohol emulsifier that helps to mix oil and water together, best for oil-in-water emulsions. It is also a cleansing agent. When combined with cetearyl alcohol, ceteareth-20 forms a mix that, according to acne.org, can be comedogenic. Ceteareth-20 A fatty alcohol emulsifier that helps to mix oil and water together, best for oil-in-water emulsions. It is also a cleansing agent. When combined with cetearyl alcohol, ceteareth-20 forms a mix that, according to acne.org, can be comedogenic.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Cleansing, Cleansing ingredients, also known as surfactants, clear dirt and buildup from the skin. Cleansing, Cleansing ingredients, also known as surfactants, clear dirt and buildup from the skin. Formula helper Emulsifying – helps to mix water and oil together. Solubilizing – helps ingredients dissolve. Formula helper Emulsifying – helps to mix water and oil together. Solubilizing – helps ingredients dissolve.
3	Polysorbate 60 An ester based on sorbitan. It is good for emulsifying water and oils together – specifically making oil-in-water emulsions. Polysorbate 60 is also said to give a product a notable fragrance. Polysorbate 60 An ester based on sorbitan. It is good for emulsifying water and oils together – specifically making oil-in-water emulsions. Polysorbate 60 is also said to give a product a notable fragrance.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Emulsifying – helps to mix water and oil together. Solubilizing – helps ingredients dissolve. Formula helper Emulsifying – helps to mix water and oil together. Solubilizing – helps ingredients dissolve.
2.5	Caprylic/Capric Triglyceride A natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss. Caprylic/Capric Triglyceride A natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients.
2	PPG-12/SMDI Copolymer PPG-12/SMDI Copolymer	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Film-forming – creates a film to increase wear time. Plasticizer – makes a product softer and easier to handle. Formula helper Film-forming – creates a film to increase wear time. Plasticizer – makes a product softer and easier to handle.
1.5	Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Denaturant – turns alcohol undrinkable. Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product. Formula helper Denaturant – turns alcohol undrinkable. Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product.
1.3	Prunus Amygdalus Dulcis (Sweet Almond) Oil An emollient and occlusive oil derived from sweet almonds. It has a favorable fatty acid composition (mainly oleic and linoleic acids), and a high content of vitamin E. Almond oil is listed as a common comedogenic ingredient by acne.org. Prunus Amygdalus Dulcis (Sweet Almond) Oil An emollient and occlusive oil derived from sweet almonds. It has a favorable fatty acid composition (mainly oleic and linoleic acids), and a high content of vitamin E. Almond oil is listed as a common comedogenic ingredient by acne.org.	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients.
1	Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use. Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Antifoaming – reduces or prevents the formation of foam. Solvent – a liquid that dissolves other ingredients. Formula helper Antifoaming – reduces or prevents the formation of foam. Solvent – a liquid that dissolves other ingredients.
0.3	Sodium Hydroxide An ingredient that is able to bring the pH of a product up, thereby making it less harsh on the skin. Sodium Hydroxide An ingredient that is able to bring the pH of a product up, thereby making it less harsh on the skin.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Formula helper Denaturant – turns alcohol undrinkable. pH adjuster – alters the pH level of a formula. Formula helper Denaturant – turns alcohol undrinkable. pH adjuster – alters the pH level of a formula.
0.3	Dehydroacetic Acid A globally approved preservative ingredient. It is a powerful fungicide and a moderate bactericide, which makes it a broad-spectrum preservative. Because it is mildly effective against bacteria, it is often paired with stronger bactericides. Dehydroacetic Acid A globally approved preservative ingredient. It is a powerful fungicide and a moderate bactericide, which makes it a broad-spectrum preservative. Because it is mildly effective against bacteria, it is often paired with stronger bactericides.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Preservative Preservatives prevent the growth of bacteria and fungi in a product. Preservative Preservatives prevent the growth of bacteria and fungi in a product.
0.3	Benzyl Alcohol A multifunctional ingredient that is supplied as a clear, colorless liquid. Its main function is as a flavoring agent and fragrance. It also acts as a broad-spectrum preservative, solvent, and viscosity-controlling agent that thins the product. Benzyl Alcohol A multifunctional ingredient that is supplied as a clear, colorless liquid. Its main function is as a flavoring agent and fragrance. It also acts as a broad-spectrum preservative, solvent, and viscosity-controlling agent that thins the product.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Formula helper Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product. Formula helper Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product.
0.3	Citrus Aurantium Bergamia (Bergamot) Fruit Oil An essential oil expressed from the peels of the bergamot orange. The scent of bergamot oil is woodier than those of other citrus essential oils. This essential oil is still not recommended if you are sensitive to citrus fruits. Citrus Aurantium Bergamia (Bergamot) Fruit Oil An essential oil expressed from the peels of the bergamot orange. The scent of bergamot oil is woodier than those of other citrus essential oils. This essential oil is still not recommended if you are sensitive to citrus fruits.	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.	Sebum Regulating, Sebum regulating agents reduce excess oil production in the skin. Sebum Regulating, Sebum regulating agents reduce excess oil production in the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients.
0.3	Potassium Sorbate A preservative widely used in food and personal care products, available from natural sources or synthetically produced. Potassium sorbate works by inhibiting the growth of yeasts, molds, and some bacteria. Potassium Sorbate A preservative widely used in food and personal care products, available from natural sources or synthetically produced. Potassium sorbate works by inhibiting the growth of yeasts, molds, and some bacteria.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Preservative Preservatives prevent the growth of bacteria and fungi in a product. Preservative Preservatives prevent the growth of bacteria and fungi in a product.
0.3	Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Soothing, Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics. Soothing, Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antifungal, Antifungal ingredients fight against the growth of fungus, either within the skincare product or on the skin. Antifungal, Antifungal ingredients fight against the growth of fungus, either within the skincare product or on the skin. Astringent, Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds. Astringent, Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Light stabilizing – absorbs UV light to protect ingredients. Formula helper Light stabilizing – absorbs UV light to protect ingredients.
0.3	Xanthan Gum A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together. Xanthan Gum A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified.	Formula helper Binding – bonds ingredients together. Emulsifying – helps to mix water and oil together. Emulsion stabilizing – increases the stability of a formula. Gel-forming – helps to create a gel by swelling. Viscosity controlling – changes the thickness of a product. Formula helper Binding – bonds ingredients together. Emulsifying – helps to mix water and oil together. Emulsion stabilizing – increases the stability of a formula. Gel-forming – helps to create a gel by swelling. Viscosity controlling – changes the thickness of a product.

Water

Function:

Origin:

Glycolic Acid

Function:

Origin:

Cetearyl Alcohol

Function:

Origin:

Ceteareth-20

Function:

Origin:

Polysorbate 60

Function:

Origin:

2.5

Caprylic/Capric Triglyceride

Function:

Origin:

PPG-12/SMDI Copolymer

Function:

Origin:

1.5

Glycerin

Function:

Origin:

1.3

Prunus Amygdalus Dulcis (Sweet Almond) Oil

Function:

Origin:

Dimethicone

Function:

Origin:

0.3

Sodium Hydroxide

Function:

Origin:

0.3

Dehydroacetic Acid

Function:

Origin:

0.3

Benzyl Alcohol

Function:

Origin:

0.3

Citrus Aurantium Bergamia (Bergamot) Fruit Oil

Function:

Origin:

0.3

Potassium Sorbate

Function:

Origin:

0.3

Camellia Sinensis Leaf Extract

Function:

Origin:

0.3

Xanthan Gum

Function:

Origin:

Ratings

Glycerin

1.5

Camellia Sinensis Leaf Extract

0.3

Benchmark

Caprylic/Capric Triglyceride

2.5

Prunus Amygdalus Dulcis (Sweet Almond) Oil

1.3

Dimethicone

1.0

Benchmark

Moisturizing rating

2.1

Ingredient		Est. %	Benchmark Sciense based points to which we compare all humectants and all occlusives in a product to calculate its Humectancy and Occlusivity. Sciense based points to which we compare all humectants and all occlusives in a product to calculate its Humectancy and Occlusivity.	Raiting
Humectancy	All humectants	1.8	10	1.8
	Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	1.5
	Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	0.3
Occlusivity	All occlusives	4.8	20	2.4
	Caprylic/Capric Triglyceride A natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss. Caprylic/Capric Triglyceride A natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss.	2.5
	Prunus Amygdalus Dulcis (Sweet Almond) Oil An emollient and occlusive oil derived from sweet almonds. It has a favorable fatty acid composition (mainly oleic and linoleic acids), and a high content of vitamin E. Almond oil is listed as a common comedogenic ingredient by acne.org. Prunus Amygdalus Dulcis (Sweet Almond) Oil An emollient and occlusive oil derived from sweet almonds. It has a favorable fatty acid composition (mainly oleic and linoleic acids), and a high content of vitamin E. Almond oil is listed as a common comedogenic ingredient by acne.org.	1.3
	Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use. Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.	1.0
Moisturizing rating				2.1

Ingredient	Est. %	Benchmark According to various studies, a formula made up of 10% humectants will significantly increase skin hydration. Some studies also suggest that any further icrease in the consentration of humectants does not translate inty any more hydration and may even be dehydrating. To achieve maximum Humectancy, the product should have humectants with a total score of 10 and more. According to various studies, a formula made up of 10% humectants will significantly increase skin hydration. Some studies also suggest that any further icrease in the consentration of humectants does not translate inty any more hydration and may even be dehydrating. To achieve maximum Humectancy, the product should have humectants with a total score of 10 and more.	Humectancy
Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	1.5
Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	0.3
All humectants	1.8	10	1.8

Glycerin

1.5

Camellia Sinensis Leaf Extract

0.3

Benchmark

Ingredient	Est. %	Benchmark The most occlusive product possible is 100% petrolatum (hello Vaseline Jelly). According to studies, hovewer, even 10% petrolatum can achieve almost the same mosturizing effect. The occlusive properties of petrolatum are at least twice as superior as other occlusive ingredients. This is why, in order to match the moisturizing efficacy of 10% petrolatum, a product needs to contain at least 20% of other occlusives. Our benchmark for maximum Occlusivity is 20 (and the petrolatum score is always doubled). The most occlusive product possible is 100% petrolatum (hello Vaseline Jelly). According to studies, hovewer, even 10% petrolatum can achieve almost the same mosturizing effect. The occlusive properties of petrolatum are at least twice as superior as other occlusive ingredients. This is why, in order to match the moisturizing efficacy of 10% petrolatum, a product needs to contain at least 20% of other occlusives. Our benchmark for maximum Occlusivity is 20 (and the petrolatum score is always doubled).	Occlusivity
Caprylic/Capric Triglyceride A natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss. Caprylic/Capric Triglyceride A natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss.	2.5
Prunus Amygdalus Dulcis (Sweet Almond) Oil An emollient and occlusive oil derived from sweet almonds. It has a favorable fatty acid composition (mainly oleic and linoleic acids), and a high content of vitamin E. Almond oil is listed as a common comedogenic ingredient by acne.org. Prunus Amygdalus Dulcis (Sweet Almond) Oil An emollient and occlusive oil derived from sweet almonds. It has a favorable fatty acid composition (mainly oleic and linoleic acids), and a high content of vitamin E. Almond oil is listed as a common comedogenic ingredient by acne.org.	1.3
Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use. Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.	1
All occlusives	4.8	20	2.4

Caprylic/Capric Triglyceride

2.5

Prunus Amygdalus Dulcis (Sweet Almond) Oil

1.3

Dimethicone

1.0

Benchmark

Ingredient	Ingredient anti-wrinkle power Shows on a scale of 0-10 how effective an ingredient is at reducing wrinkles. Both the Reported Efficacy of the ingredient and the Strength of Evidence are taken into account. Shows on a scale of 0-10 how effective an ingredient is at reducing wrinkles. Both the Reported Efficacy of the ingredient and the Strength of Evidence are taken into account.	when present at, %	in this formula est. %	Rating
Glycolic Acid The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums. Glycolic Acid The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums.	1.5 /10	5	10	1.5
Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	n/a This ingredient is marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of this ingredient provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient do not contribute to the anti-wrinkle rating. This ingredient is marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of this ingredient provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient do not contribute to the anti-wrinkle rating.	-	0.3	-
Total				1.5

Glycolic Acid

1.5

Ingredient anti-wrinkle power

1.5 /10

when present at, %

in this formula, est. %

Camellia Sinensis Leaf Extract

Ingredient anti-wrinkle power

n/a

when present at, %

in this formula, est. %

0.3

Anti-wrinkle rating

1.5

Ingredient	Est. %	Benchmark It differs from one antioxidant ingredient to another, but, on average, the research suggests that topically applied antioxidants are effective in consentrations of 3% or above. Any product with a total antioxidant score of 3 or more is considered to be reach in antioxidants. It differs from one antioxidant ingredient to another, but, on average, the research suggests that topically applied antioxidants are effective in consentrations of 3% or above. Any product with a total antioxidant score of 3 or more is considered to be reach in antioxidants.	Rich in Antioxidants
Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	0.3
All antioxidants	0.3	3	No

Camellia Sinensis Leaf Extract

0.3

Benchmark

Ingredient	Est. %	Benchmark The effective concentration of soothing ingredients varies, but we consider a product rich in soothing ingredients if their estimated concentration is equal to or higher than 5%. The effective concentration of soothing ingredients varies, but we consider a product rich in soothing ingredients if their estimated concentration is equal to or higher than 5%.	Rich in Soothing
Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	0.3
All soothing	0.3	5	No

Camellia Sinensis Leaf Extract

0.3

Benchmark

Ingredients explained

Water
Est. %	65
Function	Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water.

The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.

Glycolic Acid
Est. %	10
Function	Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). pH Adjuster pH adjuster – alters the pH level of a formula. pH Adjuster pH adjuster – alters the pH level of a formula.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums.

Cetearyl Alcohol
Est. %	6
Function	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Foaming, Foaming – creates foam of varying densities. Foaming, Foaming – creates foam of varying densities. Opacifying, Opacifying – reflects light and creates opaque products. Opacifying, Opacifying – reflects light and creates opaque products. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A blend of cetyl alcohol and stearyl alcohol, the fatty alcohols that are derived from palm oil. It helps to create emulsions that give off a soft and silky emollient feel and also increase product thickness.

Ceteareth-20
Est. %	4
Function	Cleansing, Cleansing ingredients, also known as surfactants, clear dirt and buildup from the skin. Cleansing, Cleansing ingredients, also known as surfactants, clear dirt and buildup from the skin. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsifying, Emulsifying – helps to mix water and oil together. Solubilizing Solubilizing – helps ingredients dissolve. Solubilizing Solubilizing – helps ingredients dissolve.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A fatty alcohol emulsifier that helps to mix oil and water together, best for oil-in-water emulsions. It is also a cleansing agent. When combined with cetearyl alcohol, ceteareth-20 forms a mix that, according to acne.org, can be comedogenic.

Polysorbate 60
Est. %	3
Function	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsifying, Emulsifying – helps to mix water and oil together. Solubilizing Solubilizing – helps ingredients dissolve. Solubilizing Solubilizing – helps ingredients dissolve.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

An ester based on sorbitan. It is good for emulsifying water and oils together – specifically making oil-in-water emulsions. Polysorbate 60 is also said to give a product a notable fragrance.

Caprylic/Capric Triglyceride
Est. %	2.5
Function	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss.

PPG-12/SMDI Copolymer
Est. %	2
Function	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Film-Forming, Film-forming – creates a film to increase wear time. Film-Forming, Film-forming – creates a film to increase wear time. Plasticizer Plasticizer – makes a product softer and easier to handle. Plasticizer Plasticizer – makes a product softer and easier to handle.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

Glycerin
Est. %	1.5
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Denaturant, Denaturant – turns alcohol undrinkable. Denaturant, Denaturant – turns alcohol undrinkable. Solvent, Solvent – a liquid that dissolves other ingredients. Solvent, Solvent – a liquid that dissolves other ingredients. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Prunus Amygdalus Dulcis (Sweet Almond) Oil
Est. %	1.3
Function	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients.
Origin	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.

An emollient and occlusive oil derived from sweet almonds. It has a favorable fatty acid composition (mainly oleic and linoleic acids), and a high content of vitamin E. Almond oil is listed as a common comedogenic ingredient by acne.org.

Dimethicone
Est. %	1
Function	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Antifoaming, Antifoaming – reduces or prevents the formation of foam. Antifoaming, Antifoaming – reduces or prevents the formation of foam. Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.

Sodium Hydroxide
Est. %	0.3
Function	Denaturant, Denaturant – turns alcohol undrinkable. Denaturant, Denaturant – turns alcohol undrinkable. pH Adjuster pH adjuster – alters the pH level of a formula. pH Adjuster pH adjuster – alters the pH level of a formula.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

An ingredient that is able to bring the pH of a product up, thereby making it less harsh on the skin.

Dehydroacetic Acid
Est. %	0.3
Function	Preservative Preservatives prevent the growth of bacteria and fungi in a product. Preservative Preservatives prevent the growth of bacteria and fungi in a product.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A globally approved preservative ingredient. It is a powerful fungicide and a moderate bactericide, which makes it a broad-spectrum preservative. Because it is mildly effective against bacteria, it is often paired with stronger bactericides.

Benzyl Alcohol
Est. %	0.3
Function	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Solvent, Solvent – a liquid that dissolves other ingredients. Solvent, Solvent – a liquid that dissolves other ingredients. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A multifunctional ingredient that is supplied as a clear, colorless liquid. Its main function is as a flavoring agent and fragrance. It also acts as a broad-spectrum preservative, solvent, and viscosity-controlling agent that thins the product.

Citrus Aurantium Bergamia (Bergamot) Fruit Oil
Est. %	0.3
Function	Sebum Regulating, Sebum regulating agents reduce excess oil production in the skin. Sebum Regulating, Sebum regulating agents reduce excess oil production in the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients.
Origin	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.

An essential oil expressed from the peels of the bergamot orange. The scent of bergamot oil is woodier than those of other citrus essential oils. This essential oil is still not recommended if you are sensitive to citrus fruits.

Potassium Sorbate
Est. %	0.3
Function	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Preservative Preservatives prevent the growth of bacteria and fungi in a product. Preservative Preservatives prevent the growth of bacteria and fungi in a product.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A preservative widely used in food and personal care products, available from natural sources or synthetically produced. Potassium sorbate works by inhibiting the growth of yeasts, molds, and some bacteria.

Camellia Sinensis Leaf Extract
Est. %	0.3
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Soothing, Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics. Soothing, Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antifungal, Antifungal ingredients fight against the growth of fungus, either within the skincare product or on the skin. Antifungal, Antifungal ingredients fight against the growth of fungus, either within the skincare product or on the skin. Astringent, Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds. Astringent, Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Light Stabilizing Light stabilizing – absorbs UV light to protect ingredients. Light Stabilizing Light stabilizing – absorbs UV light to protect ingredients.
Origin	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.

An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.

Xanthan Gum
Est. %	0.3
Function	Binding, Binding – bonds ingredients together. Binding, Binding – bonds ingredients together. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Gel-Forming, Gel-forming – helps to create a gel by swelling. Gel-Forming, Gel-forming – helps to create a gel by swelling. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified.

A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.