Elizabeth Arden Retinol Ceramide Line Erasing Eye Cream

Elizabeth Arden Retinol Ceramide Line Erasing Eye Cream
7.2
/ 10
Moisturizing
10.0 Humectancy icon Humectancy
4.4 Occlusivity icon Occlusivity
2.9Anti-wrinkle icon/ 10
Anti-wrinkle

Review

Results you may expect from using Elizabeth Arden Retinol Ceramide Line Erasing Eye Cream:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Elizabeth Arden Retinol Ceramide Line Erasing Eye Cream:

  • Significant moisturizing. It has a moisturizing rating of 7.2 out of 10.
  • Some anti-wrinkle efficacy: Elizabeth Arden Retinol Ceramide Line Erasing Eye Cream has an anti-wrinkle rating of 2.9 out of 10 so you may expect some, although limited, effect on wrinkles.

How moisturizing is it?

Highly moisturizing: Elizabeth Arden Retinol Ceramide Line Erasing Eye Cream has a moisturizing rating of 7.2 out of 10.

Is it more humectant or occlusive? Significantly more humectant. It has a maximum humectancy of 10 out of 10, primarily due to the substantial concentration of Glycerin (est. ≈9.0%) and Butylene Glycol (est. ≈6.0%), and a moderate occlusivity of 4.4 out of 10, mainly due to the high content of Cetyl Ricinoleate (est. ≈3.0%) and Dimethicone (est. ≈2.5%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, Elizabeth Arden Retinol Ceramide Line Erasing Eye Cream has a slight anti-wrinkle rating of 2.9 out of 10.

It contains 2 active ingredients with proven anti-wrinkle efficacy:

  • Retinol (est. ≈0.1%),
     the most effective non-prescription ingredient with well-proven efficacy to reduce wrinkles.
  • Niacinamide (est. ≈0.3%),
     one of the most effective and well-researched anti-wrinkle ingredients.
Among others, Elizabeth Arden Retinol Ceramide Line Erasing Eye Cream also contains contains Palmitoyl Tetrapeptide-7 and Palmitoyl Tripeptide-1, two ingredients marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of these ingredients provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, these ingredients do not contribute to the anti-wrinkle rating.
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, could deliver additional anti-wrinkle efficacy through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Ingredients

Est. % Ingredient Origin Functions
60
Water
9
Glycerin
6
Butylene Glycol
4
Cyclopentasiloxane
3
Cetyl Ricinoleate
2.5
Dimethicone
2
Cetearyl Methicone
1.5
Glyceryl Stearate
1.3
PEG-100 Stearate
1
Squalane
0.3
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
0.3
BHT
0.3
C30-45 Alkyl Dimethicone
0.3
Carbomer
0.3
Ceramide AP
0.3
Ceramide EOP
0.3
Ceramide NP
0.3
Cetearyl Alcohol
0.3
Cholesterol
0.3
Dimethicone/Vinyl Dimethicone Crosspolymer
0.3
Disodium EDTA
0.3
Fraxinus Excelsior Bark Extract
0.3
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
0.3
Isohexadecane
0.3
Mica
0.3
Niacinamide
0.3
Palmitoyl Tetrapeptide-7
0.3
Palmitoyl Tripeptide-1
0.3
Panthenol
0.3
Phytosphingosine
0.3
Polymethyl Methacrylate
0.3
Polysorbate 20
0.3
Polysorbate 60
0.1
Retinol
0.3
Silanetriol
0.3
Sodium Lauroyl Lactylate
0.3
Tocopheryl Acetate
0.3
Tromethamine
0.3
Xanthan Gum
0.3
Benzoic Acid
0.3
Chlorphenesin
0.3
Phenoxyethanol
0.3
Sorbic Acid
0.3
Iron Oxides (CI 77491)
0.3
Titanium Dioxide (CI 77891)
Est. %
Water
Function:
Origin:
Glycerin
Function:
Origin:
Butylene Glycol
Function:
Origin:
Cyclopentasiloxane
Function:
Origin:
Cetyl Ricinoleate
Function:
Origin:
Dimethicone
Function:
Origin:
Cetearyl Methicone
Function:
Origin:
Glyceryl Stearate
Function:
Origin:
PEG-100 Stearate
Function:
Origin:
Squalane
Function:
Origin:
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Function:
Origin:
BHT
Function:
Origin:
C30-45 Alkyl Dimethicone
Function:
Origin:
Carbomer
Function:
Origin:
Ceramide AP
Function:
Origin:
Ceramide EOP
Function:
Origin:
Ceramide NP
Function:
Origin:
Cetearyl Alcohol
Function:
Origin:
Cholesterol
Function:
Origin:
Dimethicone/Vinyl Dimethicone Crosspolymer
Function:
Origin:
Disodium EDTA
Function:
Origin:
Fraxinus Excelsior Bark Extract
Function:
Origin:
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Function:
Origin:
Isohexadecane
Function:
Origin:
Mica
Function:
Origin:
Niacinamide
Function:
Origin:
Palmitoyl Tetrapeptide-7
Function:
Origin:
Palmitoyl Tripeptide-1
Function:
Origin:
Panthenol
Function:
Origin:
Phytosphingosine
Function:
Origin:
Polymethyl Methacrylate
Function:
Origin:
Polysorbate 20
Function:
Origin:
Polysorbate 60
Function:
Origin:
Retinol
Function:
Origin:
Silanetriol
Function:
Origin:
Sodium Lauroyl Lactylate
Function:
Origin:
Tocopheryl Acetate
Function:
Origin:
Tromethamine
Function:
Origin:
Xanthan Gum
Function:
Origin:
Benzoic Acid
Function:
Origin:
Chlorphenesin
Function:
Origin:
Phenoxyethanol
Function:
Origin:
Sorbic Acid
Function:
Origin:
Iron Oxides (CI 77491)
Function:
Origin:
Titanium Dioxide (CI 77891)
Function:
Origin:

Ratings

All humectants
15.6
9
6
0.3
0.3
Benchmark
10
All occlusives
8.8
3.0
2.5
2.0
1.0
0.3
Benchmark
20
Moisturizing rating
7.2
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 15.6 10
10.0
9
6
0.3
0.3
Occlusivity All occlusives 8.8 20
4.4
3.0
2.5
2.0
1.0
0.3
Moisturizing rating
7.2
Ingredient Est. % Benchmark Humectancy
9
6
0.3
0.3
All humectants 15.6 10
10
All humectants
15.6
9
6
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
3
2.5
2
1
0.3
All occlusives 8.8 20
4.4
All occlusives
8.8
3.0
2.5
2.0
1.0
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
10 /10 0.4 0.1 2.5
6 /10 4 0.3 0.4
n/a
- 0.3 -
n/a
- 0.3 -
Total
2.9
Retinol
2.5
Ingredient anti-wrinkle power
10 /10
when present at, %
0.4
in this formula, est. %
0.1
Niacinamide
0.4
Ingredient anti-wrinkle power
6 /10
when present at, %
4
in this formula, est. %
0.3
Palmitoyl Tetrapeptide-7
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Palmitoyl Tripeptide-1
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
2.9
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
All antioxidants 0.9 3 No
All antioxidants
0.9
Niacinamide
0.3
BHT
0.3
Tocopheryl Acetate
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
0.3
0.3
All soothing 0.9 5 No
All soothing
0.9
0.3
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %60
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Glycerin
Est. %9
Function
Origin
Glycerin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Butylene Glycol
Est. %6
Function
Origin
Butylene GlycolA clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.
Cyclopentasiloxane
Est. %4
Function
Origin
CyclopentasiloxaneA lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in.
Cetyl Ricinoleate
Est. %3
Function
Origin
Cetyl RicinoleateDescription is coming soon
Dimethicone
Est. %2.5
Function
Origin
DimethiconeThe most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Cetearyl Methicone
Est. %2
Function
Origin
Cetearyl MethiconeDescription is coming soon
Glyceryl Stearate
Est. %1.5
Function
Origin
Glyceryl StearateAn emollient and emulsifier typically derived from vegetable sources through a chemical reaction with glycerin. It provides stability, texture, and consistency to formulations. Its main function is to allow oil and water to mix.
PEG-100 Stearate
Est. %1.3
Function
Origin
PEG-100 StearateThis surfactant is more specifically classified as an emulsifier that produces oil-in-water emulsions. PEG-100 stearate can also be used as a cleansing agent.
Squalane
Est. %1
Function
Origin
SqualaneAn occlusive moisturizing and emollient compound that forms part of the skin’s sebum. The main source of squalane had always been shark liver. Now, however, it is manufactured synthetically or derived from plant oils, such as olive and peanut oil.
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Est. %0.3
Function
Origin
Acrylates/C10-30 Alkyl Acrylate CrosspolymerA synthetic ingredient that is used to thicken water and alcohol. It results in a more lightweight formula and is commonly found in gel products.
BHT
Est. %0.3
Function
Origin
BHTAn antioxidant ingredient that naturally occurs in green algae and some bacteria or fungi but, for commercial use, is created synthetically. BHT is also used occasionally as a fragrance, where it presents a sweet, camphor-like odor.
C30-45 Alkyl Dimethicone
Est. %0.3
Function
Origin
C30-45 Alkyl DimethiconeDescription is coming soon
Carbomer
Est. %0.3
Function
Origin
CarbomerA synthetic ingredient with the ability to gel water. When used in emulsions, such as lotions and creams, carbomer can also act as an emulsion stabilizer.
Ceramide AP
Est. %0.3
Function
Origin
Ceramide APPreviously called Ceramide 6 II, Ceramide AP is one of the most common ceramides in the skin. Research has shown that dry, flaky skin has significantly less Ceramide AP. Its application helps to treat dry skin by restoring balance in the skin lipids.
Ceramide EOP
Est. %0.3
Function
Origin
Ceramide EOPFormerly called Ceramide 1, this ingredient is a skin-identical wax-like lipid with an ultra-long fatty acid chain. It restores and stabilizes the skin’s lipid matrix and helps to treat dry and flaky skin, especially when combined with other ceramides.
Ceramide NP
Est. %0.3
Function
Origin
Ceramide NPAlso known as ceramide 3, it is the most common ceramide in our skin. It helps to restore the skin’s lipid barrier and alleviate the symptoms of dry and cracked skin. Research has shown that skin suffering from conditions such as AD lacks ceramides.
Cetearyl Alcohol
Est. %0.3
Function
Origin
Cetearyl AlcoholA blend of cetyl alcohol and stearyl alcohol, the fatty alcohols that are derived from palm oil. It helps to create emulsions that give off a soft and silky emollient feel and also increase product thickness.
Cholesterol
Est. %0.3
Function
Origin
CholesterolAn emollient and important barrier repairing lipid, effective when combined with fatty acids and ceramides. Around 25% of the skin’s lipid layer is made up of cholesterol and it is found in the membrane of every single cell in our body.
Dimethicone/Vinyl Dimethicone Crosspolymer
Est. %0.3
Function
Origin
Dimethicone/Vinyl Dimethicone CrosspolymerThis ingredient can refer to several kinds of dimethicone crosspolymers. Like other silicones, it makes products feel slippery and non-greasy but can also increase the thickness or improve the water-resistance of a formula.
Disodium EDTA
Est. %0.3
Function
Origin
Disodium EDTAA synthetic chelator that helps to maintain the look and smell of a product by 'locking up' troublesome metal ions.
Fraxinus Excelsior Bark Extract
Est. %0.3
Function
Origin
Fraxinus Excelsior Bark ExtractDescription is coming soon
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
Est. %0.3
Function
Origin
Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate CopolymerAn emulsion stabilizer and thickener that helps to create a pleasant, satiny, and light formula texture. It works by forming a gel-like network within water or oil, which both stabilizes other ingredients and produces a thickening effect.
Isohexadecane
Est. %0.3
Function
Origin
IsohexadecaneA clear, colorless liquid that is commonly used as an emollient. It is made up of pure hydrocarbons and leaves a dry feeling on the skin upon application. It also increases the spreadability of a product.
Mica
Est. %0.3
Function
Origin
MicaA mineral powder made up of silicates with several functions (the main one being as a colorant). It has a shimmery appearance, making it highly desirable in certain cosmetic products. Mica also helps the product to apply more smoothly.
Niacinamide
Est. %0.3
Function
Origin
Niacinamide

Also known as vitamin B3, this ingredient is a true superstar with confirmed moisturizing, anti-acne, hyperpigmentation, and antioxidant benefits. Two studies confirm its significant anti-wrinkle efficacy.

Palmitoyl Tetrapeptide-7
Est. %0.3
Function
Origin
Palmitoyl Tetrapeptide-7

A synthetic peptide that mimics the activity of immunoglobulin G and signals to the skin to stop the inflammation. It has been shown in studies to reduce wrinkles and enhance collagen content.

Palmitoyl Tripeptide-1
Est. %0.3
Function
Origin
Palmitoyl Tripeptide-1

A small peptide consisting of three amino acids with anti-wrinkle effects. Together with Palmitoyl Tetrapeptide-7, it is a part of the popular anti-wrinkle complex called Matrixyl™ 3000.

Panthenol
Est. %0.3
Function
Origin
PanthenolA popular soothing and moisturizing derivative of vitamin B5. Panthenol is particularly beneficial for dry, flaking, burned, or damaged skin. It is used to alleviate the symptoms of a rash, dermatitis, eczema, chapped lips, and sunburn.
Phytosphingosine
Est. %0.3
Function
Origin
PhytosphingosineA key component of ceramides NP, AP, and EOP. It has barrier repair properties and stimulates the production of the skin’s Natural Moisturizing Factor. Phytosphingosine has strong antimicrobial and anti-inflammatory activity, which can be used to treat acne.
Polymethyl Methacrylate
Est. %0.3
Function
Origin
Polymethyl MethacrylateA powdered ingredient with an impressive sensory profile that gives off a creamy, sometimes velvety feeling on the skin. It is made up of tiny microspheres that roll smoothly across the skin and create slip and high spreadability.
Polysorbate 20
Est. %0.3
Function
Origin
Polysorbate 20A viscous, amber-colored liquid that functions as a solubilizer to disperse small amounts of oil into a large water phase. Polysorbate 20 is frequently used to solubilize fragrance oils into water-based emulsions.
Polysorbate 60
Est. %0.3
Function
Origin
Polysorbate 60An ester based on sorbitan. It is good for emulsifying water and oils together – specifically making oil-in-water emulsions. Polysorbate 60 is also said to give a product a notable fragrance.
Retinol
Est. %0.1
Function
Origin
Retinol

One of the most famous and well-researched anti-aging ingredients with a maximum anti-wrinkle power of 10 out of 10. It is proven to decrease wrinkles and help the skin regain its thickness, firmness, and texture. Retinol is also effective in treating pigmentation issues such as dark spots and acne.

Silanetriol
Est. %0.3
Function
Origin
SilanetriolDescription is coming soon
Sodium Lauroyl Lactylate
Est. %0.3
Function
Origin
Sodium Lauroyl LactylateA multifunctional ingredient that produces foamy cleansers and allows oil and water to mix.
Tocopheryl Acetate
Est. %0.3
Function
Origin
Tocopheryl Acetate

An antioxidant derivative of tocopherol (vitamin E). It helps to protect cells from free radicals and UV damage through the conversion to active vitamin E in the skin. It is more stable than tocopherol.

Tromethamine
Est. %0.3
Function
Origin
TromethamineAn ingredient based on amino acids that is commonly used as a pH adjuster. It has a high pH, which means that it is basic (alkaline), so adding tromethamine to a skincare product will increase its overall pH level.
Xanthan Gum
Est. %0.3
Function
Origin
Xanthan GumA natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.
Benzoic Acid
Est. %0.3
Function
Origin
Benzoic AcidA preservative effective against fungi, yeast, and some bacteria. It is commonly paired with phenoxyethanol to create a broad spectrum preservation system. Benzoic acid can also serve as a pH adjuster, fragrance, and bulking agent.
Chlorphenesin
Est. %0.3
Function
Origin
ChlorphenesinA preservative and broad-spectrum antimicrobial agent that protects products from a wide range of bacteria and fungi.
Phenoxyethanol
Est. %0.3
Function
Origin
PhenoxyethanolThe most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Sorbic Acid
Est. %0.3
Function
Origin
Sorbic AcidAn organic acid that can be naturally found in the berries of the Mountain ash, although it is manufactured synthetically for skincare purposes. It is used as a preservative and antimicrobial agent, protecting a skincare product from spoiling.
Iron Oxides (CI 77491)
Est. %0.3
Function
Origin
Iron Oxides (CI 77491)A red colorant also known as red iron oxide. This is an EU-approved colorant used in a wide variety of products.
Titanium Dioxide (CI 77891)
Est. %0.3
Function
Origin
Titanium Dioxide (CI 77891)One of two the most commonly used mineral sunscreens. It can absorb UV light, including UVB – which causes burning, tanning, and even skin cancer. Also used as a colorant, titanium dioxide gives a product a bright white color.