Peter Thomas Roth Water Drench Broad Spectrum SPF 45 Hyaluronic Cloud Moisturizer

Peter Thomas Roth Water Drench Broad Spectrum SPF 45 Hyaluronic Cloud Moisturizer
3.0
/ 10
Moisturizing
4.7 Humectancy icon Humectancy
1.3 Occlusivity icon Occlusivity
45
SPF icon
SPF
$$$$

Review

Results you may expect from using Peter Thomas Roth Water Drench Broad Spectrum SPF 45 Hyaluronic Cloud Moisturizer:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Peter Thomas Roth Water Drench Broad Spectrum SPF 45 Hyaluronic Cloud Moisturizer:

  • Light moisturizing. It has a moisturizing rating of 3.0 out of 10.
  • High sun protection for extended outdoor activities and exposure.

How moisturizing is it?

Lightly moisturizing: Peter Thomas Roth Water Drench Broad Spectrum SPF 45 Hyaluronic Cloud Moisturizer has a moisturizing rating of 3.0 out of 10.

Is it more humectant or occlusive? Rather humectant. It has a low occlusivity of 1.3 out of 10 and a moderate humectancy of 4.7 out of 10, primarily due to the high content of Glycerin (est. ≈2.0%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, Peter Thomas Roth Water Drench Broad Spectrum SPF 45 Hyaluronic Cloud Moisturizer has a zero anti-wrinkle rating.

It contains some ingredients marketed as effective in reducing wrinkles, specifically Saccharomyces/Copper Ferment, Saccharomyces/Zinc Ferment, Olea Europaea (Olive) Leaf Extract, and Ascorbyl Palmitate. However, the studies supporting the anti-wrinkle claims of these ingredients provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, these ingredients do not generate the anti-wrinkle rating.

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Sun protection

Peter Thomas Roth Water Drench Broad Spectrum SPF 45 Hyaluronic Cloud Moisturizer has an SPF of 45 and provides high sun protection. This level of protection is ideal for activities such as spending time at the beach, outdoor sports, or other activities involving prolonged sun exposure. It's important to apply sunscreen generously and reapply every two hours or after swimming or sweating to maintain effectiveness.

Ingredients

Est. % Ingredient Origin Functions
55
10
5
5
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:

Ratings

All humectants
4.7
2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
All occlusives
2.6
1.3
1.0
0.3
Benchmark
20
Moisturizing rating
3.0
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 4.7 10
4.7
2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Occlusivity All occlusives 2.6 20
1.3
1.3
1.0
0.3
Moisturizing rating
3.0
Ingredient Est. % Benchmark Occlusivity
1.3
1
0.3
All occlusives 2.6 20
1.3
All occlusives
2.6
1.3
1.0
0.3
Benchmark
20
Ingredient Est. % Benchmark Humectancy
2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
All humectants 4.7 10
4.7
All humectants
4.7
2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
n/a
- 0.3 -
n/a
- 0.3 -
n/a
- 0.3 -
n/a
- 0.3 -
Total
0
Saccharomyces/Copper Ferment
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Saccharomyces/Zinc Ferment
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Olea Europaea (Olive) Leaf Extract
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Ascorbyl Palmitate
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
0
Ingredient Est. % Benchmark
Rich in Antioxidants
1
0.3
0.3
0.3
0.3
0.3
0.3
All antioxidants 2.8 3 No
All antioxidants
2.8
Argania Spinosa Kernel Oil
1
Tocopheryl Acetate
0.3
Sodium Hyaluronate
0.3
Sambucus Nigra Fruit Extract
0.3
Tocopherol
0.3
Olea Europaea (Olive) Leaf Extract
0.3
Ascorbyl Palmitate
0.3
Benchmark
3
Ingredient Est. % Benchmark Rating
0.3
0.3
All soothing 0.6 5 No
All soothing
0.6
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %55
Function
Origin
The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Octocrylene
Est. %10
Function
Origin
A synthetic compound that protects skin against harmful ultraviolet light.
Homosalate
Est. %5
Function
Origin
A synthetic chemical UV filter that protects against harmful UVB radiation.
Octisalate
Est. %5
Function
Origin
A UVB sunscreen also known as ethylhexyl salicylate. It is normally paired with UVA sunscreens to provide broad-spectrum protection. Octisalate also protects other ingredients, like colorants and antioxidants, from deterioration due to exposure to UV light.
Avobenzone
Est. %3
Function
Origin
A popular sunscreen that protects against UVA rays, which cause premature aging and skin cancer. Avobenzone degrades after about 30 minutes of sun exposure and becomes ineffective. It is therefore often paired with UV-filter stabilizers such as octocrylene.
Polymethylsilsesquioxane
Est. %2.5
Function
Origin
A type of spherical powder that functions on a ball-bearing effect in which the tiny microspheres roll around on the skin and create lubricity. Polymethylsilsesquioxane offers extra slip to skincare products and makes the skin feel soft and smooth.
Glycerin
Est. %2
Function
Origin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Dipropylene Glycol
Est. %1.5
Function
Origin
A clear, colorless liquid that has several uses. One of its main functions is as a solvent. Dipropylene glycol is also used to reduce the thickness of skincare products.
Dimethicone
Est. %1.3
Function
Origin
The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Argania Spinosa Kernel Oil
Est. %1
Function
Origin
A fatty oil from Moroccan argan tree kernels commonly used as an occlusive moisturizer and emollient. Its uniqueness comes from its compounds: vitamin E, phospholipids, phenolic compounds, and rare phytosterols with antioxidant and emollient effects.
Tocopheryl Acetate
Est. %0.3
Function
Origin
An antioxidant derivative of tocopherol (vitamin E). It helps to protect cells from free radicals and UV damage through the conversion to active vitamin E in the skin. It is more stable than tocopherol.
Yeast Extract
Est. %0.3
Function
Origin
Also labeled as faex extract, this is a natural ingredient derived from fresh yeast. It is used in skincare as a humectant. Yeast extract also helps to shield injured or exposed skin and can aid in the skin’s wound healing process.
Cyclopentasiloxane
Est. %0.3
Function
Origin
A lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in.
Cyclohexasiloxane
Est. %0.3
Function
Origin
A clear silicone fluid with very low viscosity that is commonly used as a solvent and emollient. It has excellent spreadability, rubs in quickly, and leaves a silky smooth after-feel on the skin.
Phenoxyethanol
Est. %0.3
Function
Origin
The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone
Est. %0.3
Function
Origin
A powerful emulsifier with the unique trait of being able to work in both oil- and silicone-based formulas. It can also function as a thickener in low concentrations.
Isododecane
Est. %0.3
Function
Origin
An emollient derived from petroleum with high spreadability. It is often used as a replacement for oils and silicones because it leaves no residue behind on the skin. When a product is labeled as “oil-free” it may contain isododecane instead of heavier oils.
Dimethicone/PEG-10/15 Crosspolymer
Est. %0.3
Function
Origin
A self-emulsifying surfactant, which means that it can help facilitate the formation of water-in-silicone emulsions. This results in lightweight formulas with a soft finish. It can also act as a film-former and thickener.
Saccharide Isomerate
Est. %0.3
Function
Origin
A naturally-derived humectant that provides moisturization at low levels and is less sticky than other humectants like glycerin.
Methyl Gluceth-20
Est. %0.3
Function
Origin
A humectant synthetically derived from glucose. It takes on the form of a clear, syrupy liquid.
Sodium Chloride
Est. %0.3
Function
Origin
You’re definitely familiar with sodium chloride, even if you don’t think you are. It’s table salt! Salt works well with some cleansing ingredients (surfactants) to thicken them into gels. It also acts as a stabilizer for water-in-oil emulsions.
Sodium Hyaluronate
Est. %0.3
Function
Origin
A sodium salt of famous hyaluronic acid. A potent humectant that hydrates the skin, supports collagen function, and fills out small wrinkles. Sodium hyaluronate also offers soothing and antioxidant properties.
Bisabolol
Est. %0.3
Function
Origin
An anti-inflammatory compound found naturally in German chamomile essential oil. It has a pleasant, sweet, and floral scent. Bisabolol also has soothing and anti-inflammatory properties but can cause an allergic reaction in more sensitive individuals.
PEG-15/Lauryl Dimethicone Crosspolymer
Est. %0.3
Function
Origin
Description is coming soon
Sodium PCA
Est. %0.3
Function
Origin
One of the most important parts of the skin's Natural Moisturizing Factor, a mixture of various compounds that keeps the skin’s surface well hydrated. Sodium PCA is used in skincare for its fantastic humectant properties.
Propylene Glycol
Est. %0.3
Function
Origin
A clear, thick, odorless liquid of synthetic origin. Its main function is to stabilize cosmetic products exposed to varying temperatures. It is also a moderately strong humectant with similar properties to glycerin.
Ceteareth-25
Est. %0.3
Function
Origin
A natural or synthetically produced emulsifier often used to help form stable emulsions.
Sodium Benzoate
Est. %0.3
Function
Origin
A preservative that usually works in combination with other preservatives. It has to be at low pH (<5.5) to be effective.
Potassium Sorbate
Est. %0.3
Function
Origin
A preservative widely used in food and personal care products, available from natural sources or synthetically produced. Potassium sorbate works by inhibiting the growth of yeasts, molds, and some bacteria.
Sodium Citrate
Est. %0.3
Function
Origin
A salt of citric acid that has a salty and tart flavor and is used as a fragrance. It is mildly basic, meaning that its addition to a skincare product can adjust the pH upward.
Citric Acid
Est. %0.3
Function
Origin
A gently exfoliating AHA that helps to remove the top layer of dead skin cells. In comparison to other AHAs, citric acid has been shown to be one of the least effective. It is also very commonly used as a stabilizing and pH-controlling agent.
Sambucus Nigra Fruit Extract
Est. %0.3
Function
Origin
A soothing extract of elderberries that is packed with astringent tannins and antioxidant anthocyanins.
Cetyl Alcohol
Est. %0.3
Function
Origin
A waxy solid fatty alcohol derived from palm oil. It is most commonly used as a co-emulsifier and affects the final aesthetic of the product, leaving a soft and silky feeling on the skin. Cetyl alcohol is also used as a viscosity controlling agent.
Saccharomyces/Magnesium Ferment
Est. %0.3
Function
Origin
A biotechnological ingredient that serves to supplement magnesium in the skin. Magnesium is essential for the skin because it helps to maintain healthy elasticity and moisture levels.
Hydrolyzed Silk
Est. %0.3
Function
Origin
A moisturizing ingredient obtained from natural silk. Some studies have shown that hydrolyzed skin proteins have anti-inflammatory properties.
Behenic Acid
Est. %0.3
Function
Origin
A naturally-occuring ingredient from certain plant oils, behenic acid acts as an emulsifier and surfactant and provides a soft cushiony feeling.
Ceramide NP
Est. %0.3
Function
Origin
Also known as ceramide 3, it is the most common ceramide in our skin. It helps to restore the skin’s lipid barrier and alleviate the symptoms of dry and cracked skin. Research has shown that skin suffering from conditions such as AD lacks ceramides.
Cholesterol
Est. %0.3
Function
Origin
An emollient and important barrier repairing lipid, effective when combined with fatty acids and ceramides. Around 25% of the skin’s lipid layer is made up of cholesterol and it is found in the membrane of every single cell in our body.
Ethylhexylglycerin
Est. %0.3
Function
Origin
A preservative booster derived from glycerin. It is commonly paired with other preservatives to improve their efficacy. Ethylhexylglycerin is also a humectant due to its chemical base of glycerin.
Tocopherol
Est. %0.3
Function
Origin
Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.
Ceramide NS
Est. %0.3
Function
Origin
A wax-like lipid natural to the skin’s lipid matrix. It is less frequently used but, in combination with other ceramides, can help to restore balance in the skin’s lipid barrier.
Saccharomyces/Iron Ferment
Est. %0.3
Function
Origin
A biotech ingredient that serves to supplement iron in the skin. Iron is essential for the creation of DNA, oxygen metabolism, and elastin production.
Saccharomyces/Copper Ferment
Est. %0.3
Function
Origin
A biotech ingredient that serves to supplement copper in the skin. Copper is essential for elastin production.
Saccharomyces/Silicon Ferment
Est. %0.3
Function
Origin
A biotech ingredient that serves to supplement silicon to your skin. Topically applied silicon provides a soft and velvety after-feel.
Saccharomyces/Zinc Ferment
Est. %0.3
Function
Origin
A biotech ingredient that serves to supplement zinc to the skin. Zinc is essential for wound healing and the activity of antioxidant enzymes.
Butylene Glycol
Est. %0.3
Function
Origin
A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.
Ceramide AP
Est. %0.3
Function
Origin
Previously called Ceramide 6 II, Ceramide AP is one of the most common ceramides in the skin. Research has shown that dry, flaky skin has significantly less Ceramide AP. Its application helps to treat dry skin by restoring balance in the skin lipids.
Ceramide EOP
Est. %0.3
Function
Origin
Formerly called Ceramide 1, this ingredient is a skin-identical wax-like lipid with an ultra-long fatty acid chain. It restores and stabilizes the skin’s lipid matrix and helps to treat dry and flaky skin, especially when combined with other ceramides.
Ceramide EOS
Est. %0.3
Function
Origin
A skin-identical lipid that is an essential part of the skin barrier. Aging or exposed-to-cold skin lacks it and applying a ceramide-rich cream can replenish the lipid barrier. It may replenish linoleic acid levels in acne-prone skin.
Olea Europaea (Olive) Leaf Extract
Est. %0.3
Function
Origin
An antioxidant and fragrant extract from the leaves of the olive tree. It contains a promising anti-aging compound called Oleuropein, and a prospective anti-pigment compound called Cornoside.
Caprooyl Phytosphingosine
Est. %0.3
Function
Origin
A synthetic emollient that is similar to skin-identical ceramides. It helps to replenish the building blocks of the skin’s lipid barrier and helps with the formation and stability of emulsions.
Caprooyl Sphingosine
Est. %0.3
Function
Origin
A synthetic emollient similar to skin-identical ceramides. It helps to replenish the building blocks of the skin’s lipid barrier and aids in the formation and stability of emulsions.
Disodium EDTA
Est. %0.3
Function
Origin
A synthetic chelator that helps to maintain the look and smell of a product by 'locking up' troublesome metal ions.
Ascorbyl Palmitate
Est. %0.3
Function
Origin
A form of vitamin C derived from ascorbic acid and palmitic acid. It is more stable and less irritating than ascorbic acid. Unfortunately, Ascorbyl Palmitate lacks the studies to prove its anti-wrinkle efficacy.
Mica
Est. %0.3
Function
Origin
A mineral powder made up of silicates with several functions (the main one being as a colorant). It has a shimmery appearance, making it highly desirable in certain cosmetic products. Mica also helps the product to apply more smoothly.