Neutrogena Healthy Skin Primer Broad Spectrum SPF 15

Neutrogena Healthy Skin Primer Broad Spectrum SPF 15
2.6
/ 10
Moisturizing
0.6 Humectancy icon Humectancy
4.6 Occlusivity icon Occlusivity
15
SPF icon
SPF
$$$$

Review

Results you may expect from using Neutrogena Healthy Skin Primer Broad Spectrum SPF 15:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Neutrogena Healthy Skin Primer Broad Spectrum SPF 15:

  • Light moisturizing. It has a moisturizing rating of 2.6 out of 10.
  • Adequate sun protection for most daily activities or short periods spent outdoors.

How moisturizing is it?

Lightly moisturizing: Neutrogena Healthy Skin Primer Broad Spectrum SPF 15 has a moisturizing rating of 2.6 out of 10.

Is it more humectant or occlusive? Rather occlusive. It has a low humectancy of 0.6 out of 10 and a moderate occlusivity of 4.6 out of 10, primarily due to the high content of Dimethicone (est. ≈9.0%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Sun protection

Neutrogena Healthy Skin Primer Broad Spectrum SPF 15 has an SPF of 15 and provides moderate sun protection. This level of protection is generally adequate for most daily activities, such as running errands or spending short periods outdoors. However, if you spend a substantial amount of time outdoors, it is better to use a broad spectrum sunscreen with an SPF 30 or higher.

Ingredients

Est. % Ingredient Origin Functions
65
9
6
4
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:

Ratings

All humectants
0.6
0.3
0.3
Benchmark
10
All occlusives
9.3
9.0
0.3
Benchmark
20
Moisturizing rating
2.6
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 0.6 10
0.6
0.3
0.3
Occlusivity All occlusives 9.3 20
4.6
9.0
0.3
Moisturizing rating
2.6
Ingredient Est. % Benchmark Humectancy
0.3
0.3
All humectants 0.6 10
0.6
All humectants
0.6
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
9
0.3
All occlusives 9.3 20
4.6
All occlusives
9.3
9.0
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
None
Total
0
None
Anti-wrinkle rating
0
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
All antioxidants 0.9 3 No
All antioxidants
0.9
Glycine Soja (Soybean) Seed Extract
0.3
Tocopherol
0.3
Chrysanthemum Parthenium (Feverfew) Flower/Leaf/Stem Juice
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
All soothing 0.3 5 No
All soothing
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %65
Function
Origin
The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Dimethicone
Est. %9
Function
Origin
The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
C12-15 Alkyl Benzoate
Est. %6
Function
Origin
A synthetic emollient ester. It works to improve the appearance of the skin by filling in the microcracks on the surface, thereby making the skin appear softer and smoother. It imparts a lightweight, velvety feel.
Octinoxate
Est. %4
Function
Origin
A chemical sunscreen also known as ethylhexyl methoxycinnamate. It protects against UVB, which causes the skin to burn and tan and can lead to certain types of skin cancers. For broad-spectrum protection claims, octinoxate should be paired with a UVA sunscreen.
Homosalate
Est. %3
Function
Origin
A synthetic chemical UV filter that protects against harmful UVB radiation.
Isododecane
Est. %2.5
Function
Origin
An emollient derived from petroleum with high spreadability. It is often used as a replacement for oils and silicones because it leaves no residue behind on the skin. When a product is labeled as “oil-free” it may contain isododecane instead of heavier oils.
Avobenzone
Est. %2
Function
Origin
A popular sunscreen that protects against UVA rays, which cause premature aging and skin cancer. Avobenzone degrades after about 30 minutes of sun exposure and becomes ineffective. It is therefore often paired with UV-filter stabilizers such as octocrylene.
Methyl Trimethicone
Est. %1.5
Function
Origin
A lightweight and volatile silicone known for its excellent solvency. This silicone has a silky, cushiony feel with excellent lubricity and is commonly used as an emollient in silicone-based skincare products.
Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone
Est. %1.3
Function
Origin
A powerful emulsifier with the unique trait of being able to work in both oil- and silicone-based formulas. It can also function as a thickener in low concentrations.
Silica
Est. %1
Function
Origin
A widely used cosmetic ingredient with the same chemical composition as the sand found on beaches. A common function of silica is its ability to control viscosity. In certain chemical forms, it can effectively thicken cream-style products.
Butylene Glycol
Est. %0.3
Function
Origin
A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.
PEG-9 Polydimethylsiloxyethyl Dimethicone
Est. %0.3
Function
Origin
Description is coming soon
Synthetic Fluorphlogopite
Est. %0.3
Function
Origin
Also known as synthetic mica, this ingredient’s best property is its ability to form thin, sheet-like crystals. This gives products (mostly makeup) great slip.
Dimethicone/PEG-10/15 Crosspolymer
Est. %0.3
Function
Origin
A self-emulsifying surfactant, which means that it can help facilitate the formation of water-in-silicone emulsions. This results in lightweight formulas with a soft finish. It can also act as a film-former and thickener.
Sodium Chloride
Est. %0.3
Function
Origin

You’re definitely familiar with sodium chloride, even if you don’t think you are. It’s table salt! Salt works well with some cleansing ingredients (surfactants) to thicken them into gels. It also acts as a stabilizer for water-in-oil emulsions.

Nylon-12
Est. %0.3
Function
Origin
A synthetic powdered ingredient that imparts unique sensorial characteristics due to its microsphere structure. It can also control viscosity by bulking up the oil phase of a skincare product.
Phenoxyethanol
Est. %0.3
Function
Origin
The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Quaternium-90 Bentonite
Est. %0.3
Function
Origin
Description is coming soon
Dimethicone Crosspolymer
Est. %0.3
Function
Origin
A group of ingredients that are typically added to skincare products to adjust the formula. Dimethicone Crosspolymers stabilize a formula, regulate its thickness and consistency and give the product a velvety feel.
Caprylyl Glycol
Est. %0.3
Function
Origin
An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Glycine Soja (Soybean) Seed Extract
Est. %0.3
Function
Origin
An antioxidant, soothing, and wound healing extract derived from soybeans. Soybeans are a famous source of phytoestrogens - plant compounds that have a similar effect to steroid hormones.
Tocopherol
Est. %0.3
Function
Origin

Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.

Propylene Carbonate
Est. %0.3
Function
Origin
A derivative of propylene glycol that is used most frequently as a solvent. Additionally, propylene carbonate serves as a viscosity controlling agent reducing the thickness of the products it is added to.
Dimethicone/Vinyl Dimethicone Crosspolymer
Est. %0.3
Function
Origin
This ingredient can refer to several kinds of dimethicone crosspolymers. Like other silicones, it makes products feel slippery and non-greasy but can also increase the thickness or improve the water-resistance of a formula.
Disodium EDTA
Est. %0.3
Function
Origin
A synthetic chelator that helps to maintain the look and smell of a product by 'locking up' troublesome metal ions.
Sorbic Acid
Est. %0.3
Function
Origin
An organic acid that can be naturally found in the berries of the Mountain ash, although it is manufactured synthetically for skincare purposes. It is used as a preservative and antimicrobial agent, protecting a skincare product from spoiling.
Chrysanthemum Parthenium (Feverfew) Flower/Leaf/Stem Juice
Est. %0.3
Function
Origin
Description is coming soon
Titanium Dioxide (CI 77891)
Est. %0.3
Function
Origin
One of two the most commonly used mineral sunscreens. It can absorb UV light, including UVB – which causes burning, tanning, and even skin cancer. Also used as a colorant, titanium dioxide gives a product a bright white color.
Mica
Est. %0.3
Function
Origin
A mineral powder made up of silicates with several functions (the main one being as a colorant). It has a shimmery appearance, making it highly desirable in certain cosmetic products. Mica also helps the product to apply more smoothly.
Bismuth Oxychloride (CI 77163)
Est. %0.3
Function
Origin
An inorganic colorant that gives off a pearly white sheen. Its appearance is a result of light reflecting and refracting through the layers it forms.
Iron Oxides
Est. %0.3
Function
Origin
Mineral pigments used to provide color in skincare products. These naturally occurring pigments are available in yellow, red, brown, and black powders.
Tin Oxide
Est. %0.3
Function
Origin
A multi-functional mineral that increases the physical space a product takes up, increases the viscosity of liquid products, and, when used as an opacifying agent, makes a transparent or translucent product become opaque or solid in color.