Vichy LiftActiv Peptide-C Sunscreen SPF 30

Vichy LiftActiv Peptide-C Sunscreen SPF 30
10.0
/ 10
Moisturizing
10.0 Humectancy icon Humectancy
10.0 Occlusivity icon Occlusivity
0.1Anti-wrinkle icon/ 10
Anti-wrinkle
30
SPF icon
SPF
$$$$

Review

Results you may expect from using Vichy LiftActiv Peptide-C Sunscreen SPF 30:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Vichy LiftActiv Peptide-C Sunscreen SPF 30:

  • Intense moisturizing. It has a moisturizing rating of 10.0 out of 10.
  • Little anti-wrinkle effect: Vichy LiftActiv Peptide-C Sunscreen SPF 30 has an anti-wrinkle rating of 0.1 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.
  • High sun protection for extended outdoor activities and exposure.

How moisturizing is it?

Maximum hydration: Vichy LiftActiv Peptide-C Sunscreen SPF 30 has the highest possible moisturizing rating of 10.0 out of 10.

Is it more humectant or occlusive? This is one of the most moisturizing products on the market, with a maximum humectancy of 10 out of 10, primarily due to the substantial concentration of Glycerin (est. ≈40.0%), and a maximum occlusivity of 10 out of 10, mainly due to the significant content of Dimethicone (est. ≈22.0%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, Vichy LiftActiv Peptide-C Sunscreen SPF 30 has a minimal anti-wrinkle rating of 0.1 out of 10. It contains one ingredient with proven anti-wrinkle efficacy: Glycolic Acid (est. ≈0.3%),
 highly effective in peelings, yet with below-average anti-wrinkle efficacy when used in leave-on skincare products.
 
Among others, Vichy LiftActiv Peptide-C Sunscreen SPF 30 also contains Ascorbyl Glucoside, an ingredient marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Ascorbyl Glucoside provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not contribute to the anti-wrinkle rating.
 
Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.
 

Sun protection

Vichy LiftActiv Peptide-C Sunscreen SPF 30 has an SPF of 30 and provides high sun protection. This level of protection is ideal for activities such as spending time at the beach, outdoor sports, or other activities involving prolonged sun exposure. It's important to apply sunscreen generously and reapply every two hours or after swimming or sweating to maintain effectiveness.

Ingredients

Est. % Ingredient Origin Functions
40
22
11
7
5
5
3
1.5
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:

Ratings

All humectants
40.9
40
0.3
0.3
0.3
Benchmark
10
All occlusives
23.2
22.0
0.3
0.3
0.3
0.3
Benchmark
20
Moisturizing rating
10.0
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 40.9 10
10.0
40
0.3
0.3
0.3
Occlusivity All occlusives 23.2 20
10.0
22.0
0.3
0.3
0.3
0.3
Moisturizing rating
10.0
Ingredient Est. % Benchmark Humectancy
40
0.3
0.3
0.3
All humectants 40.9 10
10
All humectants
40.9
40
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
22
0.3
0.3
0.3
0.3
All occlusives 23.2 20
10.0
All occlusives
23.2
22.0
0.3
0.3
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
1.5 /10 5 0.3 0.1
n/a
- 0.3 -
Total
0.1
Glycolic Acid
0.1
Ingredient anti-wrinkle power
1.5 /10
when present at, %
5
in this formula, est. %
0.3
Ascorbyl Glucoside
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
0.1
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
0.3
0.3
All antioxidants 1.5 3 No
All antioxidants
1.5
Sodium Hyaluronate
0.3
Phenylethyl Resorcinol
0.3
Ascorbyl Glucoside
0.3
Tocopherol
0.3
Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
None
All soothing 0 5 No
All soothing
0
None
Benchmark
5

Ingredients explained

Glycerin
Est. %40
Function
Origin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Dimethicone
Est. %22
Function
Origin
The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Silica
Est. %11
Function
Origin
A widely used cosmetic ingredient with the same chemical composition as the sand found on beaches. A common function of silica is its ability to control viscosity. In certain chemical forms, it can effectively thicken cream-style products.
Octocrylene
Est. %7
Function
Origin
A synthetic compound that protects skin against harmful ultraviolet light.
Homosalate
Est. %5
Function
Origin
A synthetic chemical UV filter that protects against harmful UVB radiation.
Octisalate
Est. %5
Function
Origin
A UVB sunscreen also known as ethylhexyl salicylate. It is normally paired with UVA sunscreens to provide broad-spectrum protection. Octisalate also protects other ingredients, like colorants and antioxidants, from deterioration due to exposure to UV light.
Avobenzone
Est. %3
Function
Origin
A popular sunscreen that protects against UVA rays, which cause premature aging and skin cancer. Avobenzone degrades after about 30 minutes of sun exposure and becomes ineffective. It is therefore often paired with UV-filter stabilizers such as octocrylene.
PEG-100 Stearate
Est. %1.5
Function
Origin
This surfactant is more specifically classified as an emulsifier that produces oil-in-water emulsions. PEG-100 stearate can also be used as a cleansing agent.
Glyceryl Stearate
Est. %1
Function
Origin
An emollient and emulsifier typically derived from vegetable sources through a chemical reaction with glycerin. It provides stability, texture, and consistency to formulations. Its main function is to allow oil and water to mix.
Glycolic Acid
Est. %0.3
Function
Origin

The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums.

Stearic Acid
Est. %0.3
Function
Origin
A saturated fatty acid found in vegetable butter and animal fats. It is an occlusive moisturizing and emollient ingredient and also helps to maintain the barrier function of the skin.
Dicaprylyl Carbonate
Est. %0.3
Function
Origin
A very fast-spreading emollient that gives a product an incredibly lightweight feel. Dicaprylyl carbonate works well as a solvent for suspending insoluble solids such as mineral sunscreens or iron oxide pigments.
Steareth-100
Est. %0.3
Function
Origin
Description is coming soon
Dimethicone/Vinyl Dimethicone Crosspolymer
Est. %0.3
Function
Origin
This ingredient can refer to several kinds of dimethicone crosspolymers. Like other silicones, it makes products feel slippery and non-greasy but can also increase the thickness or improve the water-resistance of a formula.
Sodium Hydroxide
Est. %0.3
Function
Origin
An ingredient that is able to bring the pH of a product up, thereby making it less harsh on the skin.
Sodium Hyaluronate
Est. %0.3
Function
Origin
A sodium salt of famous hyaluronic acid. A potent humectant that hydrates the skin, supports collagen function, and fills out small wrinkles. Sodium hyaluronate also offers soothing and antioxidant properties.
Myristic Acid
Est. %0.3
Function
Origin
A common fatty acid found in various vegetable oils, most notably palm and coconut oil. It is a strongly occlusive moisturizing, emollient, and emulsifying ingredient.
Cyclodextrin
Est. %0.3
Function
Origin
A naturally derived ingredient with the ability to absorb other compounds and remove harmful metal ions from water.
Palmitic Acid
Est. %0.3
Function
Origin
A saturated fatty acid used in skincare as a strongly occlusive moisturizer and barrier repairing, emollient ingredient. It is a waxy-looking, white solid. Palmitic acid can be commonly found in animal and vegetable fats, notably palm oil.
Phenoxyethanol
Est. %0.3
Function
Origin
The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Phenylethyl Resorcinol
Est. %0.3
Function
Origin
A derivative of resorcinol whose anti-pigment activity is well-researched and backed by science. It is very light-sensitive and must be protected by packaging or careful formulation.
Guanosine
Est. %0.3
Function
Origin
Description is coming soon
Ammonium Polyacryloyldimethyl Taurate
Est. %0.3
Function
Origin
An emulsion stabilizer and thickener with gelling properties. The products containing this ingredient frequently feature lightweight and refreshing aesthetics upon application to the skin.
Ascorbyl Glucoside
Est. %0.3
Function
Origin
A derivative of vitamin C. It is more stable and less irritating than ascorbic acid. There are unfortunately no clinical studies on ascorbyl glucoside’s anti-pigment or anti-acne efficacy alone.
Tocopherol
Est. %0.3
Function
Origin
Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.
Caprylyl Glycol
Est. %0.3
Function
Origin
An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Trisodium Ethylenediamine Disuccinate
Est. %0.3
Function
Origin
A chelating agent that disables harmful heavy metal ions present in skincare.
Xanthan Gum
Est. %0.3
Function
Origin
A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.
Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate
Est. %0.3
Function
Origin
An antioxidant that protects vulnerable ingredients from the damage caused by ultraviolet radiation, which can also lead to the generation of damaging free radical species.
Pisum Sativum (Pea) Extract
Est. %0.3
Function
Origin
An extract derived from peas that contains many proteins with humectant moisturizing properties. Patents have claimed that it is able to stimulate cell renewal and increase melanin production.
Fragrance
Est. %0.3
Function
Origin
Under trade secret law, manufacturers have the right not to disclose what exactly went into the fragrance and use the unspecific word Fragrance or Parfum instead. Many fragrances are highly allergenic.