Transparent Lab Lightweight Sunscreen SPF50+

Transparent Lab Lightweight Sunscreen SPF50+
3.2
/ 10
Moisturizing
5.5 Humectancy icon Humectancy
0.8 Occlusivity icon Occlusivity
0.4Anti-wrinkle icon/ 10
Anti-wrinkle
50
SPF icon
SPF

Review

Does Transparent Lab Lightweight Sunscreen SPF50+ work?

Based on the ingredient list analysis by CreamScan AI, these are the key benefits you can expect from using Transparent Lab Lightweight Sunscreen SPF50+:

  • Light moisturizing. It has a moisturizing rating of 3.2 out of 10.
  • Little anti-wrinkle effect: Transparent Lab Lightweight Sunscreen SPF50+ has an anti-wrinkle rating of 0.4 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.
  • Very high sun protection for prolonged sun exposure, such as spending the day at the beach, hiking, or outdoor sports.

Basic moisturizer for oily skin

According to CreamScan analysis, Transparent Lab Lightweight Sunscreen SPF50+ is lightly moisturizing, with a moisturizing rating of 3.2 out of 10.

Is it more humectant or occlusive? Rather humectant. It has a low occlusivity of 0.8 out of 10 and a moderate humectancy of 5.5 out of 10, primarily due to the high content of Glycerin (est. ≈2.5%).

This product, when used alone as a moisturizer, can provide light humectant hydration in a fast-absorbing formula with a minimal amount of occlusive ingredients. This could work for people with oily skin who need a basic level of hydration.

Since it contains a moderate amount of humectants, it can also positively contribute to the moisturizing efficacy of any skincare routine when used as a step before applying the main moisturizer.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Little anti-wrinkle efficacy

According to CreamScan analysis, Transparent Lab Lightweight Sunscreen SPF50+ has a minimal anti-wrinkle rating of 0.4 out of 10.

It contains one ingredient with proven anti-wrinkle efficacy: Ectoin (est. ≈0.3%), 
 an amino acid-derived ingredient with moderate but proven anti-wrinkle efficacy.  A single clinical study involving 104 participants (Heinrich et al.) confirmed that a cream containing 2% ectoin reduced the average wrinkle width by 7% after 4 weeks of use, compared to the same formulation without ectoin (vehicle).
 
Among others, Transparent Lab Lightweight Sunscreen SPF50+ also contains some ingredients often marketed as effective in reducing wrinkles, specifically Beta-Glucan, sh-Oligopeptide-1, sh-Polypeptide-1, and sh-Polypeptide-9. However, the studies supporting the anti-wrinkle claims of these ingredients provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, these ingredients do not contribute to the anti-wrinkle rating.
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, can deliver some anti-wrinkle effects through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Very high sun protection for prolonged sun exposure, all skin types, and high-risk conditions

With an SPF of 50, Transparent Lab Lightweight Sunscreen SPF50+ provides very high sun protection, suitable for intense sun exposure in tropical climates, beach vacations, or high-altitude environments.

This level of SPF blocks 98% or more of UVB rays, offering the highest level of defense against sunburn. Broad-spectrum formulations also provide strong protection against UVA rays, which are responsible for skin aging, pigmentation, and DNA damage.

For optimal protection, choose products labeled broad-spectrum to ensure defense against both UVA rays, which contribute to skin aging and pigmentation, and UVB rays that cause sunburn.

This level of SPF is ideal for all skin types, particularly fair, sensitive, or post-treatment skin (e.g., after laser or chemical procedures). It is also highly recommended for individuals at greater risk of skin cancer.

For extended outdoor activities or water exposure, choose a water-resistant formula and reapply every two hours for maximum effectiveness.

Ingredients

Est. % Ingredient Origin Functions
55
9
6
4
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Water
Function:
Origin:
Diethylamino Hydroxybenzoyl Hexyl Benzoate
Function:
Origin:
Propylheptyl Caprylate
Function:
Origin:
Dibutyl Adipate
Function:
Origin:
Silica
Function:
Origin:
Glycerin
Function:
Origin:
Ethylhexyl Triazone
Function:
Origin:
HDI/Trimethylol Hexyllactone Crosspolymer
Function:
Origin:
Dimethicone
Function:
Origin:
Dicaprylyl Ether
Function:
Origin:
Octisalate
Function:
Origin:
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Function:
Origin:
Polymethyl Methacrylate
Function:
Origin:
Ceramide NP
Function:
Origin:
Ceramide AP
Function:
Origin:
Ceramide AS
Function:
Origin:
Ceramide NS
Function:
Origin:
Ceramide EOP
Function:
Origin:
Allantoin
Function:
Origin:
Ectoin
Function:
Origin:
Sodium Hyaluronate
Function:
Origin:
Beta-Glucan
Function:
Origin:
Gossypium Herbaceum (Cotton) Callus Culture
Function:
Origin:
Cistus Monspeliensis Extract
Function:
Origin:
Lansium Domesticum Leaf Extract
Function:
Origin:
Acetyl Glutamine
Function:
Origin:
Bacillus/Folic Acid Ferment Filtrate Extract
Function:
Origin:
Tocopherol
Function:
Origin:
sh-Oligopeptide-1
Function:
Origin:
sh-Oligopeptide-2
Function:
Origin:
sh-Polypeptide-1
Function:
Origin:
sh-Polypeptide-11
Function:
Origin:
sh-Polypeptide-9
Function:
Origin:
Decyl Glucoside
Function:
Origin:
Dimethiconol
Function:
Origin:
Poloxamer 407
Function:
Origin:
Maltodextrin
Function:
Origin:
Acrylates/Beheneth-25 Methacrylate Copolymer
Function:
Origin:
Carbomer
Function:
Origin:
Hydrogenated Lecithin
Function:
Origin:
Aminomethyl Propanol
Function:
Origin:
Xanthan Gum
Function:
Origin:
Pentylene Glycol
Function:
Origin:
PPG-12/SMDI Copolymer
Function:
Origin:
Glyceryl Glucoside
Function:
Origin:
Dipropylene Glycol
Function:
Origin:
Sucrose Distearate
Function:
Origin:
Glyceryl Stearate
Function:
Origin:
Lecithin
Function:
Origin:
Cholesterol
Function:
Origin:
1,2-Hexanediol
Function:
Origin:
Sodium Laureth Sulfate
Function:
Origin:
Butylene Glycol
Function:
Origin:
Sodium Phytate
Function:
Origin:
Citric Acid
Function:
Origin:
Caprylyl Glycol
Function:
Origin:
Ethylhexylglycerin
Function:
Origin:
Phenoxyethanol
Function:
Origin:

Ratings

All humectants
5.5
2.5
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
All occlusives
1.6
1.3
0.3
Benchmark
20
Moisturizing rating
3.2
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 5.5 10
5.5
2.5
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Occlusivity All occlusives 1.6 20
0.8
1.3
0.3
Moisturizing rating
3.2
Ingredient Est. % Benchmark Humectancy
2.5
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
All humectants 5.5 10
5.5
All humectants
5.5
2.5
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
1.3
0.3
All occlusives 1.6 20
0.8
All occlusives
1.6
1.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
2.5 /10 2 0.3 0.4
n/a
- 0.3 -
n/a
- 0.3 -
n/a
- 0.3 -
n/a
- 0.3 -
Total
0.4
Ectoin
0.4
Ingredient anti-wrinkle power
2.5 /10
when present at, %
2
in this formula, est. %
0.3
Beta-Glucan
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
sh-Oligopeptide-1
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
sh-Polypeptide-1
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
sh-Polypeptide-9
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
0.4
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
0.3
All antioxidants 1.2 3 No
All antioxidants
1.2
Sodium Hyaluronate
0.3
Beta-Glucan
0.3
Bacillus/Folic Acid Ferment Filtrate Extract
0.3
Tocopherol
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
0.3
0.3
All soothing 0.9 5 No
All soothing
0.9
0.3
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %55
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Diethylamino Hydroxybenzoyl Hexyl Benzoate
Est. %9
Function
Origin
Diethylamino Hydroxybenzoyl Hexyl Benzoate
Propylheptyl Caprylate
Est. %6
Function
Origin
Propylheptyl Caprylate
Dibutyl Adipate
Est. %4
Function
Origin
Dibutyl Adipate
Silica
Est. %3
Function
Origin
SilicaA widely used cosmetic ingredient with the same chemical composition as the sand found on beaches. A common function of silica is its ability to control viscosity. In certain chemical forms, it can effectively thicken cream-style products.
Glycerin
Est. %2.5
Function
Origin
Glycerin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Ethylhexyl Triazone
Est. %2
Function
Origin
Ethylhexyl Triazone
HDI/Trimethylol Hexyllactone Crosspolymer
Est. %1.5
Function
Origin
HDI/Trimethylol Hexyllactone CrosspolymerAn anticaking agent that prevents a product from forming lumps. It also increases slip and produces an elegant finish in skincare formulations.
Dimethicone
Est. %1.3
Function
Origin
DimethiconeThe most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Dicaprylyl Ether
Est. %1
Function
Origin
Dicaprylyl EtherA fast-spreading and very lightweight emollient. It is used to reduce the tack and oiliness of oil-based formulas and gives the skin a dry, silky after-feel. It is also a great solvent.
Octisalate
Est. %0.3
Function
Origin
OctisalateA UVB sunscreen also known as ethylhexyl salicylate. It is normally paired with UVA sunscreens to provide broad-spectrum protection. Octisalate also protects other ingredients, like colorants and antioxidants, from deterioration due to exposure to UV light.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Est. %0.3
Function
Origin
Bis-Ethylhexyloxyphenol Methoxyphenyl TriazineA synthetic "chemical" sunscreen ingredient that protects against UV damage and offers better stability and safety compared to some other traditional organic suncreen ingredients.
Polymethyl Methacrylate
Est. %0.3
Function
Origin
Polymethyl MethacrylateA powdered ingredient with an impressive sensory profile that gives off a creamy, sometimes velvety feeling on the skin. It is made up of tiny microspheres that roll smoothly across the skin and create slip and high spreadability.
Ceramide NP
Est. %0.3
Function
Origin
Ceramide NPAlso known as ceramide 3, it is the most common ceramide in our skin. It helps to restore the skin’s lipid barrier and alleviate the symptoms of dry and cracked skin. Research has shown that skin suffering from conditions such as AD lacks ceramides.
Ceramide AP
Est. %0.3
Function
Origin
Ceramide APPreviously called Ceramide 6 II, Ceramide AP is one of the most common ceramides in the skin. Research has shown that dry, flaky skin has significantly less Ceramide AP. Its application helps to treat dry skin by restoring balance in the skin lipids.
Ceramide AS
Est. %0.3
Function
Origin
Ceramide AS
Ceramide NS
Est. %0.3
Function
Origin
Ceramide NSA wax-like lipid natural to the skin’s lipid matrix. It is less frequently used but, in combination with other ceramides, can help to restore balance in the skin’s lipid barrier.
Ceramide EOP
Est. %0.3
Function
Origin
Ceramide EOP

Formerly called Ceramide 1, this ingredient is a skin-identical wax-like lipid with an ultra-long fatty acid chain. It restores and stabilizes the skin’s lipid matrix and helps to treat dry and flaky skin, especially when combined with other ceramides.

Allantoin
Est. %0.3
Function
Origin
AllantoinA fluffy, white powder that acts as a humectant due to its water-loving chemistry and as an exfoliant that helps to remove dead skin cells. It has also been shown to be very soothing to irritated and inflamed skin.
Ectoin
Est. %0.3
Function
Origin
Ectoin

An amino acid-derived ingredient with average, yet proven by one study, anti-wrinkle efficacy.

Sodium Hyaluronate
Est. %0.3
Function
Origin
Sodium Hyaluronate

A sodium salt of famous hyaluronic acid. A potent humectant that hydrates the skin, supports collagen function, and fills out small wrinkles. Sodium hyaluronate also offers soothing and antioxidant properties.

Beta-Glucan
Est. %0.3
Function
Origin
Beta-GlucanA special polysaccharide obtained from cereals, mushrooms, yeast, bacteria, and some species of seaweed. It is a promising anti-wrinkle, wound healing, antioxidant, and moisturizing ingredient.
Gossypium Herbaceum (Cotton) Callus Culture
Est. %0.3
Function
Origin
Gossypium Herbaceum (Cotton) Callus Culture
Cistus Monspeliensis Extract
Est. %0.3
Function
Origin
Cistus Monspeliensis Extract
Lansium Domesticum Leaf Extract
Est. %0.3
Function
Origin
Lansium Domesticum Leaf Extract
Acetyl Glutamine
Est. %0.3
Function
Origin
Acetyl Glutamine
Bacillus/Folic Acid Ferment Filtrate Extract
Est. %0.3
Function
Origin
Bacillus/Folic Acid Ferment Filtrate Extract

Combined with folic acid and derived from Bacillus fermentation, this extract acts as a humectant, retaining moisture to keep skin hydrated, and as an antioxidant, shielding skin from free-radical damage.

Tocopherol
Est. %0.3
Function
Origin
Tocopherol

Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.

sh-Oligopeptide-1
Est. %0.3
Function
Origin
sh-Oligopeptide-1

Also known as Human Epidermal Growth Factor. It increases metabolism in skin cells and is claimed to improves skin texture and elasticity.

sh-Oligopeptide-2
Est. %0.3
Function
Origin
sh-Oligopeptide-2

Description is coming soon

sh-Polypeptide-1
Est. %0.3
Function
Origin
sh-Polypeptide-1

Also known as Basic Fibroblast Growth Factor. It has collagen and elastin-boosting effects and can result in firmer, more elastic skin. It has been tested for scar healing, but its use in skincare products is still a bit controversial.

sh-Polypeptide-11
Est. %0.3
Function
Origin
sh-Polypeptide-11
sh-Polypeptide-9
Est. %0.3
Function
Origin
sh-Polypeptide-9

Also known as Vascular Endothelial Growth Factor. It stimulates the formation of new blood vessels, thereby improving microcirculation. It is not well researched for use in skincare and is still a bit controversial.

Decyl Glucoside
Est. %0.3
Function
Origin
Decyl GlucosideA surfactant that can function as both a cleansing agent and emulsifier. As a cleansing agent, it is very mild on the skin. As an emulsifier, decyl glucoside will produce oil-in-water emulsions. It is naturally derived from vegetable oils and starch.
Dimethiconol
Est. %0.3
Function
Origin
DimethiconolA synthetic dimethicone with rich, non-tacky emolliency. It features the typical sensorial profile of silicones, with high spreadability and a luxurious, oil-free after-feel. Dimethiconol can also serve as an antifoaming agent.
Poloxamer 407
Est. %0.3
Function
Origin
Poloxamer 407
Maltodextrin
Est. %0.3
Function
Origin
MaltodextrinA formula helper manufactured from starch. It has a sweet flavor and is often used in rinse-off products to support their foaming structure. Maltodextrin is also used to stabilize emulsions and to absorb and bind other ingredients in the formula.
Acrylates/Beheneth-25 Methacrylate Copolymer
Est. %0.3
Function
Origin
Acrylates/Beheneth-25 Methacrylate Copolymer
Carbomer
Est. %0.3
Function
Origin
CarbomerA synthetic ingredient with the ability to gel water. When used in emulsions, such as lotions and creams, carbomer can also act as an emulsion stabilizer.
Hydrogenated Lecithin
Est. %0.3
Function
Origin
Hydrogenated LecithinA version of plain lecithin that has been saturated with hydrogen atoms. This ingredient can be derived from plants, like soy or sunflower, from egg yolks, or made synthetically. Its major function is to emulsify water and oils.
Aminomethyl Propanol
Est. %0.3
Function
Origin
Aminomethyl PropanolA synthetic ingredient that helps to adjust the pH of a product to make it less acidic.
Xanthan Gum
Est. %0.3
Function
Origin
Xanthan GumA natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.
Pentylene Glycol
Est. %0.3
Function
Origin
Pentylene Glycol

A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent.

PPG-12/SMDI Copolymer
Est. %0.3
Function
Origin
PPG-12/SMDI Copolymer
Glyceryl Glucoside
Est. %0.3
Function
Origin
Glyceryl Glucoside
Dipropylene Glycol
Est. %0.3
Function
Origin
Dipropylene GlycolA clear, colorless liquid that has several uses. One of its main functions is as a solvent. Dipropylene glycol is also used to reduce the thickness of skincare products.
Sucrose Distearate
Est. %0.3
Function
Origin
Sucrose Distearate
Glyceryl Stearate
Est. %0.3
Function
Origin
Glyceryl StearateAn emollient and emulsifier typically derived from vegetable sources through a chemical reaction with glycerin. It provides stability, texture, and consistency to formulations. Its main function is to allow oil and water to mix.
Lecithin
Est. %0.3
Function
Origin
LecithinA humectant, emollient, and emulsifier best suited for water-in-oil emulsions. Lecithin can come from sunflowers, soy, and eggs. The downside to lecithin is that it causes an extra burden on the formula’s preservative because it is nutritious.
Cholesterol
Est. %0.3
Function
Origin
CholesterolAn emollient and important barrier repairing lipid, effective when combined with fatty acids and ceramides. Around 25% of the skin’s lipid layer is made up of cholesterol and it is found in the membrane of every single cell in our body.
1,2-Hexanediol
Est. %0.3
Function
Origin
1,2-HexanediolA multi-functional formula helper. It is a well-studied preservtive against bacteria and can help pigments and fragrances disperse evenly in a formula.
Sodium Laureth Sulfate
Est. %0.3
Function
Origin
Sodium Laureth SulfateSLES, not to be confused with SLS (sodium lauryl sulfate), is a synthetic soap-like ingredient used in cleansing products. It foams well and removes oil and dirt. SLES may cause skin dryness and irritation, although it is considered less irritating than SLS.
Butylene Glycol
Est. %0.3
Function
Origin
Butylene Glycol

A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.

Sodium Phytate
Est. %0.3
Function
Origin
Sodium PhytateSodium phytate is a chelating agent that serves to remove heavy metal ions from water. Removing metal ions helps other ingredients, such as antioxidants and preservatives, to perform better and keep products from separating.
Citric Acid
Est. %0.3
Function
Origin
Citric AcidA gently exfoliating AHA that helps to remove the top layer of dead skin cells. In comparison to other AHAs, citric acid has been shown to be one of the least effective. It is also very commonly used as a stabilizing and pH-controlling agent.
Caprylyl Glycol
Est. %0.3
Function
Origin
Caprylyl GlycolAn emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Ethylhexylglycerin
Est. %0.3
Function
Origin
EthylhexylglycerinA preservative booster derived from glycerin. It is commonly paired with other preservatives to improve their efficacy. Ethylhexylglycerin is also a humectant due to its chemical base of glycerin.
Phenoxyethanol
Est. %0.3
Function
Origin
PhenoxyethanolThe most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.