SVR Blur Sun Secure SPF 50+

SVR Blur Sun Secure SPF 50+
1.0
/ 10
Moisturizing
1.8 Humectancy icon Humectancy
0.3 Occlusivity icon Occlusivity
0.4Anti-wrinkle icon/ 10
Anti-wrinkle
50
SPF icon
SPF

Review

Does SVR Blur Sun Secure SPF 50+ work?

Based on the ingredient list analysis by CreamScan AI, these are the key benefits you can expect from using SVR Blur Sun Secure SPF 50+:

  • A bit of moisturizing. It has a moisturizing rating of 1.0 out of 10.
  • Little anti-wrinkle effect: SVR Blur Sun Secure SPF 50+ has an anti-wrinkle rating of 0.4 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.
  • Very high sun protection for prolonged sun exposure, such as spending the day at the beach, hiking, or outdoor sports.

Slight Moisturizing When Used Alone

According to CreamScan analysis, SVR Blur Sun Secure SPF 50+ is slightly moisturizing, with a moisturizing rating of 1.0 out of 10.

Is it more humectant or occlusive? This product has relatively comparable levels of Humectancy and Occlusivity: a low Humectancy of 1.8 out of 10 and a low Occlusivity of 0.3 out of 10.

This type of product provides relatively light moisturizing on its own but can contribute to overall moisturizing efficacy when used as part of a skincare routine, alongside another moisturizer.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Little anti-wrinkle efficacy

According to CreamScan analysis, SVR Blur Sun Secure SPF 50+ has a minimal anti-wrinkle rating of 0.4 out of 10.

It contains one ingredient with proven anti-wrinkle efficacy: Niacinamide (est. ≈0.3%), 
 one of the most effective and well-researched anti-wrinkle ingredients. A clinical study involving 30 participants (Kawada et al.) confirmed that a cream with 4% niacinamide reduced the average depth of wrinkles around the eyes by 9% after 8 weeks of use, compared to a vehicle (the same formulation without niacinamide).
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, can deliver some anti-wrinkle effects through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Very high sun protection for prolonged sun exposure, all skin types, and high-risk conditions

With an SPF of 50, SVR Blur Sun Secure SPF 50+ provides very high sun protection, suitable for intense sun exposure in tropical climates, beach vacations, or high-altitude environments.

This level of SPF blocks 98% or more of UVB rays, offering the highest level of defense against sunburn. Broad-spectrum formulations also provide strong protection against UVA rays, which are responsible for skin aging, pigmentation, and DNA damage.

For optimal protection, choose products labeled broad-spectrum to ensure defense against both UVA rays, which contribute to skin aging and pigmentation, and UVB rays that cause sunburn.

This level of SPF is ideal for all skin types, particularly fair, sensitive, or post-treatment skin (e.g., after laser or chemical procedures). It is also highly recommended for individuals at greater risk of skin cancer.

For extended outdoor activities or water exposure, choose a water-resistant formula and reapply every two hours for maximum effectiveness.

Ingredients

Est. % Ingredient Origin Functions
65
9
6
4
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Water
Function:
Origin:
Silica
Function:
Origin:
Isododecane
Function:
Origin:
Diethylamino Hydroxybenzoyl Hexyl Benzoate
Function:
Origin:
Dicaprylyl Carbonate
Function:
Origin:
Isopropyl Lauroyl Sarcosinate
Function:
Origin:
Ethylhexyl Triazone
Function:
Origin:
Beheneth-25
Function:
Origin:
Diethylhexyl Butamido Triazone
Function:
Origin:
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Function:
Origin:
Coco-Caprylate/Caprate
Function:
Origin:
Dimethicone/Bis-Isobutyl PPG-20 Crosspolymer
Function:
Origin:
Pentylene Glycol
Function:
Origin:
Cetearyl Alcohol
Function:
Origin:
1,2-Hexanediol
Function:
Origin:
Niacinamide
Function:
Origin:
Red 7 Lake (CI 15850)
Function:
Origin:
Glycine Soja (Soybean) Oil
Function:
Origin:
Lecithin
Function:
Origin:
Lepidium Sativum Sprout Extract
Function:
Origin:
Glycerin
Function:
Origin:
Tocopherol
Function:
Origin:
Caprylyl Glycol
Function:
Origin:
Ethylhexylglycerin
Function:
Origin:
Sodium Polyacrylate Starch
Function:
Origin:
Triethoxycaprylylsilane
Function:
Origin:
Coco-Glucoside
Function:
Origin:
Iron Oxides (CI 77492)
Function:
Origin:

Ratings

All humectants
1.8
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
All occlusives
0.6
0.3
0.3
Benchmark
20
Moisturizing rating
1.0
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 1.8 10
1.8
0.3
0.3
0.3
0.3
0.3
0.3
Occlusivity All occlusives 0.6 20
0.3
0.3
0.3
Moisturizing rating
1.0
Ingredient Est. % Benchmark Humectancy
0.3
0.3
0.3
0.3
0.3
0.3
All humectants 1.8 10
1.8
All humectants
1.8
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
0.3
0.3
All occlusives 0.6 20
0.3
All occlusives
0.6
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
6 /10 4 0.3 0.4
Total
0.4
Niacinamide
0.4
Ingredient anti-wrinkle power
6 /10
when present at, %
4
in this formula, est. %
0.3
Anti-wrinkle rating
0.4
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
0.3
All antioxidants 1.2 3 No
All antioxidants
1.2
Niacinamide
0.3
Glycine Soja (Soybean) Oil
0.3
Lepidium Sativum Sprout Extract
0.3
Tocopherol
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
0.3
All soothing 0.6 5 No
All soothing
0.6
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %65
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Silica
Est. %9
Function
Origin
SilicaA widely used cosmetic ingredient with the same chemical composition as the sand found on beaches. A common function of silica is its ability to control viscosity. In certain chemical forms, it can effectively thicken cream-style products.
Isododecane
Est. %6
Function
Origin
IsododecaneAn emollient derived from petroleum with high spreadability. It is often used as a replacement for oils and silicones because it leaves no residue behind on the skin. When a product is labeled as “oil-free” it may contain isododecane instead of heavier oils.
Diethylamino Hydroxybenzoyl Hexyl Benzoate
Est. %4
Function
Origin
Diethylamino Hydroxybenzoyl Hexyl Benzoate
Dicaprylyl Carbonate
Est. %3
Function
Origin
Dicaprylyl CarbonateA very fast-spreading emollient that gives a product an incredibly lightweight feel. Dicaprylyl carbonate works well as a solvent for suspending insoluble solids such as mineral sunscreens or iron oxide pigments.
Isopropyl Lauroyl Sarcosinate
Est. %2.5
Function
Origin
Isopropyl Lauroyl Sarcosinate
Ethylhexyl Triazone
Est. %2
Function
Origin
Ethylhexyl Triazone
Beheneth-25
Est. %1.5
Function
Origin
Beheneth-25
Diethylhexyl Butamido Triazone
Est. %1.3
Function
Origin
Diethylhexyl Butamido Triazone
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Est. %1
Function
Origin
Bis-Ethylhexyloxyphenol Methoxyphenyl TriazineA synthetic "chemical" sunscreen ingredient that protects against UV damage and offers better stability and safety compared to some other traditional organic suncreen ingredients.
Coco-Caprylate/Caprate
Est. %0.3
Function
Origin
Coco-Caprylate/CaprateA naturally-derived emollient ester. It is a blend of caprylates and caprates and, relative to other emollients, is lightweight and dry on the skin. As a result, coco-caprylate/caprate serves as a natural alternative to volatile silicones.
Dimethicone/Bis-Isobutyl PPG-20 Crosspolymer
Est. %0.3
Function
Origin
Dimethicone/Bis-Isobutyl PPG-20 Crosspolymer
Pentylene Glycol
Est. %0.3
Function
Origin
Pentylene Glycol

A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent.

Cetearyl Alcohol
Est. %0.3
Function
Origin
Cetearyl AlcoholA blend of cetyl alcohol and stearyl alcohol, the fatty alcohols that are derived from palm oil. It helps to create emulsions that give off a soft and silky emollient feel and also increase product thickness.
1,2-Hexanediol
Est. %0.3
Function
Origin
1,2-HexanediolA multi-functional formula helper. It is a well-studied preservtive against bacteria and can help pigments and fragrances disperse evenly in a formula.
Niacinamide
Est. %0.3
Function
Origin
Niacinamide

Also known as vitamin B3, this ingredient is a true superstar with confirmed moisturizing, anti-acne, hyperpigmentation, and antioxidant benefits. Two studies confirm its significant anti-wrinkle efficacy.

Red 7 Lake (CI 15850)
Est. %0.3
Function
Origin
Red 7 Lake (CI 15850)
Glycine Soja (Soybean) Oil
Est. %0.3
Function
Origin
Glycine Soja (Soybean) OilAn occlusive moisturizing oil expressed from soybeans. It does not leave an oily feeling on the skin due to its low content of saturated fatty acids. Glycine soja oil contains emollient fatty acids and a significant amount of antioxidants.
Lecithin
Est. %0.3
Function
Origin
LecithinA humectant, emollient, and emulsifier best suited for water-in-oil emulsions. Lecithin can come from sunflowers, soy, and eggs. The downside to lecithin is that it causes an extra burden on the formula’s preservative because it is nutritious.
Lepidium Sativum Sprout Extract
Est. %0.3
Function
Origin
Lepidium Sativum Sprout ExtractA pungently fragrant extract derived from cress. It that is rich in sulfur and contains antioxidant and anti-inflammatory flavonoids, carotenoids, and organic acids.
Glycerin
Est. %0.3
Function
Origin
Glycerin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Tocopherol
Est. %0.3
Function
Origin
Tocopherol

Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.

Caprylyl Glycol
Est. %0.3
Function
Origin
Caprylyl GlycolAn emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Ethylhexylglycerin
Est. %0.3
Function
Origin
EthylhexylglycerinA preservative booster derived from glycerin. It is commonly paired with other preservatives to improve their efficacy. Ethylhexylglycerin is also a humectant due to its chemical base of glycerin.
Sodium Polyacrylate Starch
Est. %0.3
Function
Origin
Sodium Polyacrylate Starch
Triethoxycaprylylsilane
Est. %0.3
Function
Origin
TriethoxycaprylylsilaneA binding and coating ingredient that allows pigments like iron oxides and mica to disperse better in oily environments. This leads to more vibrant colors.
Coco-Glucoside
Est. %0.3
Function
Origin
Coco-GlucosideA mild cleansing and foaming agent. It can be used on its own as a gentle cleanser in a skin cleansing product or can be combined with more powerful cleansing agents, called anionic surfactants, to make them milder on the skin.
Iron Oxides (CI 77492)
Est. %0.3
Function
Origin
Iron Oxides (CI 77492)Also known as iron (III) oxide, this ingredient is a yellow-colored pigment that can either be derived from minerals or produced synthetically. It adds yellow tones to cosmetic products.