Renee Rouleau Skin Care Post-Breakout Fading Gel | Unbiased Skincare Efficacy Review by AI

Review

Does Renee Rouleau Skin Care Post-Breakout Fading Gel work?

Based on the ingredient list analysis by CreamScan AI, these are the key benefits you can expect from using Renee Rouleau Skin Care Post-Breakout Fading Gel:

Strong humectant moisturizing. This lightweight, humectant-rich product, ideal for oily skin, has a moisturizing rating of 5.6 out of 10.

Little anti-wrinkle effect: Renee Rouleau Skin Care Post-Breakout Fading Gel has an anti-wrinkle rating of 1.5 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.

Lightweight moisturizer ideal for oily skin and a humectant boost for any skincare routine

According to CreamScan analysis, Renee Rouleau Skin Care Post-Breakout Fading Gel is quite moisturizing, with a moisturizing rating of 5.6 out of 10.

Is it more humectant or occlusive? Significantly more humectant. It has a low occlusivity of 1.2 out of 10 and a maximum humectancy of 10 out of 10, primarily due to the high content of Sodium Lactate (est. ≈5.0%), Pentylene Glycol (est. ≈3.0%) and Lactic Acid (est. ≈2.5%).

This humectant-rich product, when used alone as a moisturizer, is ideal for oily skin, offering significant hydration in a lightweight, fast-absorbing formula with a minimal amount of occlusive ingredients. It’s also a great choice for people with normal skin who prefer lightweight moisturizers.

Such a humectant boost will also positively contribute to the moisturizing efficacy of any skincare routine when used as a step before applying the main moisturizer. This type of formulation is typically used in serums, where a light, fast-absorbing texture is key.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Little anti-wrinkle efficacy

According to CreamScan analysis, Renee Rouleau Skin Care Post-Breakout Fading Gel has a minimal anti-wrinkle rating of 1.5 out of 10.

It contains one ingredient with proven anti-wrinkle efficacy: Glycolic Acid (est. ≈7.5%),

a highly effective ingredient in peelings but with moderate anti-wrinkle efficacy in leave-on skincare products, as supported by a single clinical study. This study, involving 72 participants (Thibault et al.), demonstrated that a lotion with 5% GA reduced the fine wrinkling score by 6% after 34 days of use, compared to a vehicle (the same formulation without GA).

Among others, Renee Rouleau Skin Care Post-Breakout Fading Gel also contains Camellia Sinensis Leaf Extract, an ingredient often marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Camellia Sinensis Leaf Extract provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not contribute to the anti-wrinkle rating.

Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, can deliver some anti-wrinkle effects through its moisturizing action.

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Antimicrobial
Antifungal
Astringent
Fragrance
Preservative
Formula helpers

Other

Est. % The Estimated % is our algorithm-based assumption about an ingredient's concentration in a formula. Learn more The Estimated % is our algorithm-based assumption about an ingredient's concentration in a formula. Learn more	Ingredient	Origin	Functions
70	Water The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients. Water The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.	Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water.	Formula helper Solvent – a liquid that dissolves other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients.
7.5	Glycolic Acid The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums. Glycolic Acid The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Formula helper pH adjuster – alters the pH level of a formula. Formula helper pH adjuster – alters the pH level of a formula.
5	Sodium Lactate A sodium salt of lactic acid. Its main function is as a humectant but it can also serve as a pH adjuster. Additionally, sodium lactate can also be used as a chemical exfoliant due to its close chemical relation to lactic acid. Sodium Lactate A sodium salt of lactic acid. Its main function is as a humectant but it can also serve as a pH adjuster. Additionally, sodium lactate can also be used as a chemical exfoliant due to its close chemical relation to lactic acid.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Formula helper pH adjuster – alters the pH level of a formula. Formula helper pH adjuster – alters the pH level of a formula.
3	Pentylene Glycol A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent. Pentylene Glycol A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Petroleum Ingredients derived from petroleum, also called crude oil. Crude oil deposits were obtained from the remains of ancient organisms, such as plants, algae, and bacteria. Petroleum Ingredients derived from petroleum, also called crude oil. Crude oil deposits were obtained from the remains of ancient organisms, such as plants, algae, and bacteria.	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Formula helper Solvent – a liquid that dissolves other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients.
2.5	Lactic Acid The most popular AHA in skincare and less irritating than glycolic acid. It can be naturally found in sour milk. It is a humectant moisturizing, pH stabilizing, and gently exfoliating ingredient, able to soften dry, cracked, and peeling skin. Lactic Acid The most popular AHA in skincare and less irritating than glycolic acid. It can be naturally found in sour milk. It is a humectant moisturizing, pH stabilizing, and gently exfoliating ingredient, able to soften dry, cracked, and peeling skin.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Anti-Pigmentation, Anti-pigmentation ingredients help to even skin tone by reducing the intensity of dark spots and hyperpigmentation. Anti-Pigmentation, Anti-pigmentation ingredients help to even skin tone by reducing the intensity of dark spots and hyperpigmentation. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper pH adjuster – alters the pH level of a formula. Formula helper pH adjuster – alters the pH level of a formula.
2	Phenyl Trimethicone A silicone fluid that is used as an occlusive moisturizer. It applies smoothly to the skin and reduces the tack associated with organic oils. Phenyl Trimethicone A silicone fluid that is used as an occlusive moisturizer. It applies smoothly to the skin and reduces the tack associated with organic oils.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Antifoaming – reduces or prevents the formation of foam. Formula helper Antifoaming – reduces or prevents the formation of foam.
1.5	Sea Whip Extract An extract derived from soft sea corals called sea fans or sea whips. It allegedly contains some anti-inflammatory terpenoid compounds. Sea Whip Extract An extract derived from soft sea corals called sea fans or sea whips. It allegedly contains some anti-inflammatory terpenoid compounds.	Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Soothing Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics. Soothing Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics.
1.3	Xanthan Gum A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together. Xanthan Gum A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified.	Formula helper Binding – bonds ingredients together. Emulsifying – helps to mix water and oil together. Emulsion stabilizing – increases the stability of a formula. Gel-forming – helps to create a gel by swelling. Viscosity controlling – changes the thickness of a product. Formula helper Binding – bonds ingredients together. Emulsifying – helps to mix water and oil together. Emulsion stabilizing – increases the stability of a formula. Gel-forming – helps to create a gel by swelling. Viscosity controlling – changes the thickness of a product.
1	Ilex Paraguariensis Leaf Extract Ilex Paraguariensis Leaf Extract	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.	Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients.
0.3	PEG-8/SMDI Copolymer PEG-8/SMDI Copolymer	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Film-forming – creates a film to increase wear time. Plasticizer – makes a product softer and easier to handle. Formula helper Film-forming – creates a film to increase wear time. Plasticizer – makes a product softer and easier to handle.
0.3	Paullinia Cupana Seed Extract Paullinia Cupana Seed Extract	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.	Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Astringent Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds. Astringent Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds.
0.3	Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Soothing, Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics. Soothing, Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antifungal, Antifungal ingredients fight against the growth of fungus, either within the skincare product or on the skin. Antifungal, Antifungal ingredients fight against the growth of fungus, either within the skincare product or on the skin. Astringent, Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds. Astringent, Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Light stabilizing – absorbs UV light to protect ingredients. Formula helper Light stabilizing – absorbs UV light to protect ingredients.
0.3	Dimethiconol A synthetic dimethicone with rich, non-tacky emolliency. It features the typical sensorial profile of silicones, with high spreadability and a luxurious, oil-free after-feel. Dimethiconol can also serve as an antifoaming agent. Dimethiconol A synthetic dimethicone with rich, non-tacky emolliency. It features the typical sensorial profile of silicones, with high spreadability and a luxurious, oil-free after-feel. Dimethiconol can also serve as an antifoaming agent.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Antifoaming – reduces or prevents the formation of foam. Formula helper Antifoaming – reduces or prevents the formation of foam.
0.3	Arginine A humectant amino acid used to attract water to the skin’s surface. It is a part of the skin's Natural Moisturizing Factor, a mixture of various compounds that keeps the skin’s surface well hydrated. Arginine can also be used as a pH adjuster. Arginine A humectant amino acid used to attract water to the skin’s surface. It is a part of the skin's Natural Moisturizing Factor, a mixture of various compounds that keeps the skin’s surface well hydrated. Arginine can also be used as a pH adjuster.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Antistatic – reduces electric charge buildup. pH adjuster – alters the pH level of a formula. Formula helper Antistatic – reduces electric charge buildup. pH adjuster – alters the pH level of a formula.
0.3	Hydrogenated Lecithin A version of plain lecithin that has been saturated with hydrogen atoms. This ingredient can be derived from plants, like soy or sunflower, from egg yolks, or made synthetically. Its major function is to emulsify water and oils. Hydrogenated Lecithin A version of plain lecithin that has been saturated with hydrogen atoms. This ingredient can be derived from plants, like soy or sunflower, from egg yolks, or made synthetically. Its major function is to emulsify water and oils.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Formula helper Dispersing – ensures the even distribution of particles. Emulsifying – helps to mix water and oil together. Formula helper Dispersing – ensures the even distribution of particles. Emulsifying – helps to mix water and oil together.
0.3	Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use. Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Antifoaming – reduces or prevents the formation of foam. Solvent – a liquid that dissolves other ingredients. Formula helper Antifoaming – reduces or prevents the formation of foam. Solvent – a liquid that dissolves other ingredients.
0.3	Cola Nitida Seed Extract Cola Nitida Seed Extract	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.
0.3	Bentonite A naturally occurring material that has a variety of functions. It is used as absorbent, since the bentonite can absorb oils produced by the skin and prevent a greasy appearance. It is also a great opacifier. Bentonite A naturally occurring material that has a variety of functions. It is used as absorbent, since the bentonite can absorb oils produced by the skin and prevent a greasy appearance. It is also a great opacifier.	Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water.	Formula helper Absorbent – soaks up excess oil from the skin. Bulking – increases the volume of a product. Dispersing – ensures the even distribution of particles. Emulsion stabilizing – increases the stability of a formula. Opacifying – reflects light and creates opaque products. Viscosity controlling – changes the thickness of a product. Formula helper Absorbent – soaks up excess oil from the skin. Bulking – increases the volume of a product. Dispersing – ensures the even distribution of particles. Emulsion stabilizing – increases the stability of a formula. Opacifying – reflects light and creates opaque products. Viscosity controlling – changes the thickness of a product.
0.3	Butylene Glycol A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups. Butylene Glycol A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Petroleum Ingredients derived from petroleum, also called crude oil. Crude oil deposits were obtained from the remains of ancient organisms, such as plants, algae, and bacteria. Petroleum Ingredients derived from petroleum, also called crude oil. Crude oil deposits were obtained from the remains of ancient organisms, such as plants, algae, and bacteria.	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product. Formula helper Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product.
0.3	Hydroxyethylcellulose A naturally-derived thickener that can form clear gel textures without the slimy feeling, unlike some other natural gel-formers. Hydroxyethylcellulose A naturally-derived thickener that can form clear gel textures without the slimy feeling, unlike some other natural gel-formers.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Formula helper Binding – bonds ingredients together. Emulsion stabilizing – increases the stability of a formula. Film-forming – creates a film to increase wear time. Light stabilizing – absorbs UV light to protect ingredients. Viscosity controlling – changes the thickness of a product. Formula helper Binding – bonds ingredients together. Emulsion stabilizing – increases the stability of a formula. Film-forming – creates a film to increase wear time. Light stabilizing – absorbs UV light to protect ingredients. Viscosity controlling – changes the thickness of a product.
0.3	Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Denaturant – turns alcohol undrinkable. Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product. Formula helper Denaturant – turns alcohol undrinkable. Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product.
0.3	Sodium Carbomer Like Carbomer, only pre-reacted so that no neutralization is required. Carbomer based gels are clear and have a non-sticky smooth feel. Many high end cosmetics will use carbomers as part of their formula to build body without making a product feel heavy. Sodium Carbomer Like Carbomer, only pre-reacted so that no neutralization is required. Carbomer based gels are clear and have a non-sticky smooth feel. Many high end cosmetics will use carbomers as part of their formula to build body without making a product feel heavy.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Formula helper Emulsion stabilizing – increases the stability of a formula. Film-forming – creates a film to increase wear time. Gel-forming – helps to create a gel by swelling. Viscosity controlling – changes the thickness of a product. Formula helper Emulsion stabilizing – increases the stability of a formula. Film-forming – creates a film to increase wear time. Gel-forming – helps to create a gel by swelling. Viscosity controlling – changes the thickness of a product.

Water

Function:

Origin:

7.5

Glycolic Acid

Function:

Origin:

Sodium Lactate

Function:

Origin:

Pentylene Glycol

Function:

Origin:

2.5

Lactic Acid

Function:

Origin:

Phenyl Trimethicone

Function:

Origin:

1.5

Sea Whip Extract

Function:

Origin:

1.3

Xanthan Gum

Function:

Origin:

Ilex Paraguariensis Leaf Extract

Function:

Origin:

0.3

PEG-8/SMDI Copolymer

Function:

Origin:

0.3

Paullinia Cupana Seed Extract

Function:

Origin:

0.3

Camellia Sinensis Leaf Extract

Function:

Origin:

0.3

Dimethiconol

Function:

Origin:

0.3

Arginine

Function:

Origin:

0.3

Hydrogenated Lecithin

Function:

Origin:

0.3

Dimethicone

Function:

Origin:

0.3

Cola Nitida Seed Extract

Function:

Origin:

0.3

Bentonite

Function:

Origin:

0.3

Butylene Glycol

Function:

Origin:

0.3

Hydroxyethylcellulose

Function:

Origin:

0.3

Glycerin

Function:

Origin:

0.3

Sodium Carbomer

Function:

Origin:

Ratings

Sodium Lactate

Pentylene Glycol

Lactic Acid

2.5

Camellia Sinensis Leaf Extract

0.3

Arginine

0.3

Butylene Glycol

0.3

Glycerin

0.3

Benchmark

Phenyl Trimethicone

2.0

Dimethicone

0.3

Benchmark

Moisturizing rating

5.6

Ingredient		Est. %	Benchmark Sciense based points to which we compare all humectants and all occlusives in a product to calculate its Humectancy and Occlusivity. Sciense based points to which we compare all humectants and all occlusives in a product to calculate its Humectancy and Occlusivity.	Raiting
Humectancy	All humectants	11.7	10	10.0
	Sodium Lactate A sodium salt of lactic acid. Its main function is as a humectant but it can also serve as a pH adjuster. Additionally, sodium lactate can also be used as a chemical exfoliant due to its close chemical relation to lactic acid. Sodium Lactate A sodium salt of lactic acid. Its main function is as a humectant but it can also serve as a pH adjuster. Additionally, sodium lactate can also be used as a chemical exfoliant due to its close chemical relation to lactic acid.	5
	Pentylene Glycol A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent. Pentylene Glycol A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent.	3
	Lactic Acid The most popular AHA in skincare and less irritating than glycolic acid. It can be naturally found in sour milk. It is a humectant moisturizing, pH stabilizing, and gently exfoliating ingredient, able to soften dry, cracked, and peeling skin. Lactic Acid The most popular AHA in skincare and less irritating than glycolic acid. It can be naturally found in sour milk. It is a humectant moisturizing, pH stabilizing, and gently exfoliating ingredient, able to soften dry, cracked, and peeling skin.	2.5
	Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	0.3
	Arginine A humectant amino acid used to attract water to the skin’s surface. It is a part of the skin's Natural Moisturizing Factor, a mixture of various compounds that keeps the skin’s surface well hydrated. Arginine can also be used as a pH adjuster. Arginine A humectant amino acid used to attract water to the skin’s surface. It is a part of the skin's Natural Moisturizing Factor, a mixture of various compounds that keeps the skin’s surface well hydrated. Arginine can also be used as a pH adjuster.	0.3
	Butylene Glycol A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups. Butylene Glycol A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.	0.3
	Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	0.3
Occlusivity	All occlusives	2.3	20	1.2
	Phenyl Trimethicone A silicone fluid that is used as an occlusive moisturizer. It applies smoothly to the skin and reduces the tack associated with organic oils. Phenyl Trimethicone A silicone fluid that is used as an occlusive moisturizer. It applies smoothly to the skin and reduces the tack associated with organic oils.	2.0
	Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use. Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.	0.3
Moisturizing rating				5.6

Ingredient	Est. %	Benchmark According to various studies, a formula made up of 10% humectants will significantly increase skin hydration. Some studies also suggest that any further icrease in the consentration of humectants does not translate inty any more hydration and may even be dehydrating. To achieve maximum Humectancy, the product should have humectants with a total score of 10 and more. According to various studies, a formula made up of 10% humectants will significantly increase skin hydration. Some studies also suggest that any further icrease in the consentration of humectants does not translate inty any more hydration and may even be dehydrating. To achieve maximum Humectancy, the product should have humectants with a total score of 10 and more.	Humectancy
Sodium Lactate A sodium salt of lactic acid. Its main function is as a humectant but it can also serve as a pH adjuster. Additionally, sodium lactate can also be used as a chemical exfoliant due to its close chemical relation to lactic acid. Sodium Lactate A sodium salt of lactic acid. Its main function is as a humectant but it can also serve as a pH adjuster. Additionally, sodium lactate can also be used as a chemical exfoliant due to its close chemical relation to lactic acid.	5
Pentylene Glycol A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent. Pentylene Glycol A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent.	3
Lactic Acid The most popular AHA in skincare and less irritating than glycolic acid. It can be naturally found in sour milk. It is a humectant moisturizing, pH stabilizing, and gently exfoliating ingredient, able to soften dry, cracked, and peeling skin. Lactic Acid The most popular AHA in skincare and less irritating than glycolic acid. It can be naturally found in sour milk. It is a humectant moisturizing, pH stabilizing, and gently exfoliating ingredient, able to soften dry, cracked, and peeling skin.	2.5
Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	0.3
Arginine A humectant amino acid used to attract water to the skin’s surface. It is a part of the skin's Natural Moisturizing Factor, a mixture of various compounds that keeps the skin’s surface well hydrated. Arginine can also be used as a pH adjuster. Arginine A humectant amino acid used to attract water to the skin’s surface. It is a part of the skin's Natural Moisturizing Factor, a mixture of various compounds that keeps the skin’s surface well hydrated. Arginine can also be used as a pH adjuster.	0.3
Butylene Glycol A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups. Butylene Glycol A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.	0.3
Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	0.3
All humectants	11.7	10	10

Sodium Lactate

Pentylene Glycol

Lactic Acid

2.5

Camellia Sinensis Leaf Extract

0.3

Arginine

0.3

Butylene Glycol

0.3

Glycerin

0.3

Benchmark

Ingredient	Est. %	Benchmark The most occlusive product possible is 100% petrolatum (hello Vaseline Jelly). According to studies, hovewer, even 10% petrolatum can achieve almost the same mosturizing effect. The occlusive properties of petrolatum are at least twice as superior as other occlusive ingredients. This is why, in order to match the moisturizing efficacy of 10% petrolatum, a product needs to contain at least 20% of other occlusives. Our benchmark for maximum Occlusivity is 20 (and the petrolatum score is always doubled). The most occlusive product possible is 100% petrolatum (hello Vaseline Jelly). According to studies, hovewer, even 10% petrolatum can achieve almost the same mosturizing effect. The occlusive properties of petrolatum are at least twice as superior as other occlusive ingredients. This is why, in order to match the moisturizing efficacy of 10% petrolatum, a product needs to contain at least 20% of other occlusives. Our benchmark for maximum Occlusivity is 20 (and the petrolatum score is always doubled).	Occlusivity
Phenyl Trimethicone A silicone fluid that is used as an occlusive moisturizer. It applies smoothly to the skin and reduces the tack associated with organic oils. Phenyl Trimethicone A silicone fluid that is used as an occlusive moisturizer. It applies smoothly to the skin and reduces the tack associated with organic oils.	2
Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use. Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.	0.3
All occlusives	2.3	20	1.2

Phenyl Trimethicone

2.0

Dimethicone

0.3

Benchmark

Ingredient	Ingredient anti-wrinkle power Shows on a scale of 0-10 how effective an ingredient is at reducing wrinkles. Both the Reported Efficacy of the ingredient and the Strength of Evidence are taken into account. Shows on a scale of 0-10 how effective an ingredient is at reducing wrinkles. Both the Reported Efficacy of the ingredient and the Strength of Evidence are taken into account.	when present at, %	in this formula est. %	Rating
Glycolic Acid The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums. Glycolic Acid The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums.	1.5 /10	5	7.5	1.5
Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	n/a This ingredient is marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of this ingredient provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient do not contribute to the anti-wrinkle rating. This ingredient is marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of this ingredient provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient do not contribute to the anti-wrinkle rating.	-	0.3	-
Total				1.5

Glycolic Acid

1.5

Ingredient anti-wrinkle power

1.5 /10

when present at, %

in this formula, est. %

7.5

Camellia Sinensis Leaf Extract

Ingredient anti-wrinkle power

n/a

when present at, %

in this formula, est. %

0.3

Anti-wrinkle rating

1.5

Ingredient	Est. %	Benchmark It differs from one antioxidant ingredient to another, but, on average, the research suggests that topically applied antioxidants are effective in consentrations of 3% or above. Any product with a total antioxidant score of 3 or more is considered to be reach in antioxidants. It differs from one antioxidant ingredient to another, but, on average, the research suggests that topically applied antioxidants are effective in consentrations of 3% or above. Any product with a total antioxidant score of 3 or more is considered to be reach in antioxidants.	Rich in Antioxidants
Paullinia Cupana Seed Extract Paullinia Cupana Seed Extract	0.3
Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	0.3
All antioxidants	0.6	3	No

Paullinia Cupana Seed Extract

0.3

Camellia Sinensis Leaf Extract

0.3

Benchmark

Ingredient	Est. %	Benchmark The effective concentration of soothing ingredients varies, but we consider a product rich in soothing ingredients if their estimated concentration is equal to or higher than 5%. The effective concentration of soothing ingredients varies, but we consider a product rich in soothing ingredients if their estimated concentration is equal to or higher than 5%.	Rich in Soothing
Sea Whip Extract An extract derived from soft sea corals called sea fans or sea whips. It allegedly contains some anti-inflammatory terpenoid compounds. Sea Whip Extract An extract derived from soft sea corals called sea fans or sea whips. It allegedly contains some anti-inflammatory terpenoid compounds.	1.5
Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient. Camellia Sinensis Leaf Extract An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.	0.3
All soothing	1.8	5	No

Sea Whip Extract

1.5

Camellia Sinensis Leaf Extract

0.3

Benchmark

Ingredients explained

Water
Est. %	70
Function	Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water.

The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.

Glycolic Acid
Est. %	7.5
Function	Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). pH Adjuster pH adjuster – alters the pH level of a formula. pH Adjuster pH adjuster – alters the pH level of a formula.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums.

Sodium Lactate
Est. %	5
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). pH Adjuster pH adjuster – alters the pH level of a formula. pH Adjuster pH adjuster – alters the pH level of a formula.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

A sodium salt of lactic acid. Its main function is as a humectant but it can also serve as a pH adjuster. Additionally, sodium lactate can also be used as a chemical exfoliant due to its close chemical relation to lactic acid.

Pentylene Glycol
Est. %	3
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Petroleum Ingredients derived from petroleum, also called crude oil. Crude oil deposits were obtained from the remains of ancient organisms, such as plants, algae, and bacteria. Petroleum Ingredients derived from petroleum, also called crude oil. Crude oil deposits were obtained from the remains of ancient organisms, such as plants, algae, and bacteria.

A naturally or synthetically derived preservative that exhibits effective antifungal and antibacterial traits. It also acts as a booster for more traditional preservatives. Pentylene glycol can also serve as a moisturizing humectant and solvent.

Lactic Acid
Est. %	2.5
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Anti-Pigmentation, Anti-pigmentation ingredients help to even skin tone by reducing the intensity of dark spots and hyperpigmentation. Anti-Pigmentation, Anti-pigmentation ingredients help to even skin tone by reducing the intensity of dark spots and hyperpigmentation. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. pH Adjuster pH adjuster – alters the pH level of a formula. pH Adjuster pH adjuster – alters the pH level of a formula.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

The most popular AHA in skincare and less irritating than glycolic acid. It can be naturally found in sour milk. It is a humectant moisturizing, pH stabilizing, and gently exfoliating ingredient, able to soften dry, cracked, and peeling skin.

Phenyl Trimethicone
Est. %	2
Function	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Antifoaming Antifoaming – reduces or prevents the formation of foam. Antifoaming Antifoaming – reduces or prevents the formation of foam.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A silicone fluid that is used as an occlusive moisturizer. It applies smoothly to the skin and reduces the tack associated with organic oils.

Sea Whip Extract
Est. %	1.5
Function	Soothing Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics. Soothing Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics.
Origin	Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

An extract derived from soft sea corals called sea fans or sea whips. It allegedly contains some anti-inflammatory terpenoid compounds.

Xanthan Gum
Est. %	1.3
Function	Binding, Binding – bonds ingredients together. Binding, Binding – bonds ingredients together. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Gel-Forming, Gel-forming – helps to create a gel by swelling. Gel-Forming, Gel-forming – helps to create a gel by swelling. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified.

A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.

Ilex Paraguariensis Leaf Extract
Est. %	1
Function	Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients.
Origin	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.

PEG-8/SMDI Copolymer
Est. %	0.3
Function	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Film-Forming, Film-forming – creates a film to increase wear time. Film-Forming, Film-forming – creates a film to increase wear time. Plasticizer Plasticizer – makes a product softer and easier to handle. Plasticizer Plasticizer – makes a product softer and easier to handle.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

Paullinia Cupana Seed Extract
Est. %	0.3
Function	Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Astringent Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds. Astringent Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds.
Origin	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.

Camellia Sinensis Leaf Extract
Est. %	0.3
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Antioxidant, Antioxidants reduce the oxidative stress caused by free radicals and prevent accelerated skin aging. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Soothing, Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics. Soothing, Soothing ingredients reduce the signs of sensitivity in irritated and inflamed skin. This includes anti-inflammatory ingredients, anti-itch agents, and topical analgesics. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antifungal, Antifungal ingredients fight against the growth of fungus, either within the skincare product or on the skin. Antifungal, Antifungal ingredients fight against the growth of fungus, either within the skincare product or on the skin. Astringent, Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds. Astringent, Astringent ingredients provide the skin with a tightened feeling, help to reduce the appearance of large pores, and assist in the healing of small cuts and wounds. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Light Stabilizing Light stabilizing – absorbs UV light to protect ingredients. Light Stabilizing Light stabilizing – absorbs UV light to protect ingredients.
Origin	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.

An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.

Dimethiconol
Est. %	0.3
Function	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Antifoaming Antifoaming – reduces or prevents the formation of foam. Antifoaming Antifoaming – reduces or prevents the formation of foam.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A synthetic dimethicone with rich, non-tacky emolliency. It features the typical sensorial profile of silicones, with high spreadability and a luxurious, oil-free after-feel. Dimethiconol can also serve as an antifoaming agent.

Arginine
Est. %	0.3
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Antistatic, Antistatic – reduces electric charge buildup. Antistatic, Antistatic – reduces electric charge buildup. pH Adjuster pH adjuster – alters the pH level of a formula. pH Adjuster pH adjuster – alters the pH level of a formula.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

A humectant amino acid used to attract water to the skin’s surface. It is a part of the skin's Natural Moisturizing Factor, a mixture of various compounds that keeps the skin’s surface well hydrated. Arginine can also be used as a pH adjuster.

Hydrogenated Lecithin
Est. %	0.3
Function	Dispersing, Dispersing – ensures the even distribution of particles. Dispersing, Dispersing – ensures the even distribution of particles. Emulsifying Emulsifying – helps to mix water and oil together. Emulsifying Emulsifying – helps to mix water and oil together.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

A version of plain lecithin that has been saturated with hydrogen atoms. This ingredient can be derived from plants, like soy or sunflower, from egg yolks, or made synthetically. Its major function is to emulsify water and oils.

Dimethicone
Est. %	0.3
Function	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Antifoaming, Antifoaming – reduces or prevents the formation of foam. Antifoaming, Antifoaming – reduces or prevents the formation of foam. Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.

Cola Nitida Seed Extract
Est. %	0.3
Function
Origin	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.

Bentonite
Est. %	0.3
Function	Absorbent, Absorbent – soaks up excess oil from the skin. Absorbent, Absorbent – soaks up excess oil from the skin. Bulking, Bulking – increases the volume of a product. Bulking, Bulking – increases the volume of a product. Dispersing, Dispersing – ensures the even distribution of particles. Dispersing, Dispersing – ensures the even distribution of particles. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Opacifying, Opacifying – reflects light and creates opaque products. Opacifying, Opacifying – reflects light and creates opaque products. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water.

A naturally occurring material that has a variety of functions. It is used as absorbent, since the bentonite can absorb oils produced by the skin and prevent a greasy appearance. It is also a great opacifier.

Butylene Glycol
Est. %	0.3
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Solvent, Solvent – a liquid that dissolves other ingredients. Solvent, Solvent – a liquid that dissolves other ingredients. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Petroleum Ingredients derived from petroleum, also called crude oil. Crude oil deposits were obtained from the remains of ancient organisms, such as plants, algae, and bacteria. Petroleum Ingredients derived from petroleum, also called crude oil. Crude oil deposits were obtained from the remains of ancient organisms, such as plants, algae, and bacteria.

A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.

Hydroxyethylcellulose
Est. %	0.3
Function	Binding, Binding – bonds ingredients together. Binding, Binding – bonds ingredients together. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Film-Forming, Film-forming – creates a film to increase wear time. Film-Forming, Film-forming – creates a film to increase wear time. Light Stabilizing, Light stabilizing – absorbs UV light to protect ingredients. Light Stabilizing, Light stabilizing – absorbs UV light to protect ingredients. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A naturally-derived thickener that can form clear gel textures without the slimy feeling, unlike some other natural gel-formers.

Glycerin
Est. %	0.3
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Denaturant, Denaturant – turns alcohol undrinkable. Denaturant, Denaturant – turns alcohol undrinkable. Solvent, Solvent – a liquid that dissolves other ingredients. Solvent, Solvent – a liquid that dissolves other ingredients. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Sodium Carbomer
Est. %	0.3
Function	Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Film-Forming, Film-forming – creates a film to increase wear time. Film-Forming, Film-forming – creates a film to increase wear time. Gel-Forming, Gel-forming – helps to create a gel by swelling. Gel-Forming, Gel-forming – helps to create a gel by swelling. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

Like Carbomer, only pre-reacted so that no neutralization is required. Carbomer based gels are clear and have a non-sticky smooth feel. Many high end cosmetics will use carbomers as part of their formula to build body without making a product feel heavy.