Neutrogena Rapid Wrinkle Repair Moisturizer SPF 30

Neutrogena Rapid Wrinkle Repair Moisturizer SPF 30
3.8
/ 10
Moisturizing
3.1 Humectancy icon Humectancy
4.5 Occlusivity icon Occlusivity
2.6Anti-wrinkle icon/ 10
Anti-wrinkle
30
SPF icon
SPF

Review

Does Neutrogena Rapid Wrinkle Repair Moisturizer SPF 30 work?

Based on the ingredient list analysis by CreamScan AI, these are the key benefits you can expect from using Neutrogena Rapid Wrinkle Repair Moisturizer SPF 30:

  • Light moisturizing. It has a moisturizing rating of 3.8 out of 10.
  • Some anti-wrinkle efficacy: Neutrogena Rapid Wrinkle Repair Moisturizer SPF 30 has an anti-wrinkle rating of 2.6 out of 10 so you may expect some, although limited, effect on wrinkles.
  • Moderate to high sun protection for daily outdoor activities

Moisturizer with the right occlusivity for normal skin, ideally to be used with extra humectants

According to CreamScan analysis, Neutrogena Rapid Wrinkle Repair Moisturizer SPF 30 is lightly moisturizing, with a moisturizing rating of 3.8 out of 10.

Is it more humectant or occlusive? This product has relatively comparable levels of humectancy and occlusivity: a moderate humectancy of 3.1 out of 10, primarily due to the substantial concentration of Glycerin (est. ≈2.5%), and a moderate occlusivity of 4.5 out of 10, solely because of the high content of Dimethicone (est. ≈9.0%).

This type of product, when used as a standalone moisturizer, may provide some occlusive moisturizing that is adequate for normal skin.

However, it contains a relatively low level of humectants, and people with normal skin would definitely benefit from adding more humectants to their moisturizing routine beyond what this product offers. If this is your only moisturizer, it may be worth including a humectant-rich product, such as a serum, in your skincare routine.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Some anti-wrinkle efficacy

According to CreamScan analysis, Neutrogena Rapid Wrinkle Repair Moisturizer SPF 30 has a slight anti-wrinkle rating of 2.6 out of 10.

It contains 2 active ingredients with proven anti-wrinkle efficacy:

  • Retinol (est. ≈0.1%),
     the most effective non-prescription anti-wrinkle ingredient. Numerous clinical studies have shown its positive effects at concentrations as low as 0.1%. A study with 36 participants (Kafi et al.) confirmed that a lotion containing 0.4% retinol reduced wrinkle severity by 21% after 24 weeks of use, compared to the same formulation without retinol (vehicle).
  • Ascorbic Acid (est. ≈0.3%),
     or Vitamin C, a popular ingredient, yet with moderate anti-wrinkle efficacy, as confirmed by a single clinical study involving 20 participants (Humbert et al.). This study showed that a cream with a relatively high concentration of 5% ascorbic acid reduced the average wrinkle depth by 7% after 6 months of use, compared to a vehicle (the same formulation without ascorbic acid).
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, can deliver some anti-wrinkle effects through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Moderate to high sun protection for daily outdoor activities

With an SPF of 30, Neutrogena Rapid Wrinkle Repair Moisturizer SPF 30 provides moderate to high sun protection, making it suitable for daily use during moderate sun exposure, such as commuting or light outdoor activities.

This level of SPF offers excellent defense against UVB rays, blocking up to 97% of harmful radiation. When labeled as broad-spectrum, these products also protect against UVA rays, which are responsible for skin aging and hyperpigmentation.

For optimal protection, choose products labeled broad-spectrum to ensure defense against both UVA rays, which contribute to skin aging and pigmentation, and UVB rays that cause sunburn.

This level of SPF works well for skin types mildly prone to sunburn. It is particularly suitable for low-to-moderate UV index environments and non-tropical climates. However, it is not recommended for prolonged outdoor exposure or intense UV conditions. Reapplication every two hours is essential to maintain effectiveness.

Ingredients

Est. % Ingredient Origin Functions
60
9
6
4
4
2.5
2
2
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.1
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Water
Function:
Origin:
Dimethicone
Function:
Origin:
Isononyl Isononanoate
Function:
Origin:
Homosalate
Function:
Origin:
Octisalate
Function:
Origin:
Glycerin
Function:
Origin:
Avobenzone
Function:
Origin:
Octocrylene
Function:
Origin:
Cetyl Alcohol
Function:
Origin:
Styrene/Acrylates Copolymer
Function:
Origin:
Steareth-21
Function:
Origin:
Trisiloxane
Function:
Origin:
Nylon-12
Function:
Origin:
Dimethicone/Vinyl Dimethicone Crosspolymer
Function:
Origin:
Stearyl Alcohol
Function:
Origin:
PEG-100 Stearate
Function:
Origin:
Glyceryl Stearate
Function:
Origin:
Phenoxyethanol
Function:
Origin:
Caprylyl Glycol
Function:
Origin:
Fragrance
Function:
Origin:
Chlorphenesin
Function:
Origin:
Xanthan Gum
Function:
Origin:
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Function:
Origin:
Hydrolyzed Myrtus Communis Leaf Extract
Function:
Origin:
Polysorbate 20
Function:
Origin:
Retinol
Function:
Origin:
BHT
Function:
Origin:
Sodium Hyaluronate
Function:
Origin:
Disodium EDTA
Function:
Origin:
Silica
Function:
Origin:
Ascorbic Acid
Function:
Origin:
Sodium Hydroxide
Function:
Origin:

Ratings

All humectants
3.1
2.5
0.3
0.3
Benchmark
10
All occlusives
9.0
9.0
Benchmark
20
Moisturizing rating
3.8
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 3.1 10
3.1
2.5
0.3
0.3
Occlusivity All occlusives 9.0 20
4.5
9.0
Moisturizing rating
3.8
Ingredient Est. % Benchmark Humectancy
2.5
0.3
0.3
All humectants 3.1 10
3.1
All humectants
3.1
2.5
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
9
All occlusives 9.0 20
4.5
All occlusives
9.0
9.0
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
10 /10 0.4 0.1 2.5
2.5 /10 5 0.3 0.1
Total
2.6
Retinol
2.5
Ingredient anti-wrinkle power
10 /10
when present at, %
0.4
in this formula, est. %
0.1
Ascorbic Acid
0.1
Ingredient anti-wrinkle power
2.5 /10
when present at, %
5
in this formula, est. %
0.3
Anti-wrinkle rating
2.6
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
All antioxidants 0.9 3 No
All antioxidants
0.9
Ascorbic Acid
0.3
BHT
0.3
Sodium Hyaluronate
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
None
All soothing 0 5 No
All soothing
0
None
Benchmark
5

Ingredients explained

Water
Est. %60
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Dimethicone
Est. %9
Function
Origin
DimethiconeThe most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Isononyl Isononanoate
Est. %6
Function
Origin
Isononyl IsononanoateAn ester of a branched fatty acid with a branched fatty alcohol. It is an easily spreadable emollient that has a silky, dry, non-greasy feel on the skin.
Homosalate
Est. %4
Function
Origin
HomosalateA synthetic chemical UV filter that protects against harmful UVB radiation.
Octisalate
Est. %4
Function
Origin
OctisalateA UVB sunscreen also known as ethylhexyl salicylate. It is normally paired with UVA sunscreens to provide broad-spectrum protection. Octisalate also protects other ingredients, like colorants and antioxidants, from deterioration due to exposure to UV light.
Glycerin
Est. %2.5
Function
Origin
Glycerin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Avobenzone
Est. %2
Function
Origin
AvobenzoneA popular sunscreen that protects against UVA rays, which cause premature aging and skin cancer. Avobenzone degrades after about 30 minutes of sun exposure and becomes ineffective. It is therefore often paired with UV-filter stabilizers such as octocrylene.
Octocrylene
Est. %2
Function
Origin
OctocryleneA synthetic compound that protects skin against harmful ultraviolet light.
Cetyl Alcohol
Est. %1.3
Function
Origin
Cetyl AlcoholA waxy solid fatty alcohol derived from palm oil. It is most commonly used as a co-emulsifier and affects the final aesthetic of the product, leaving a soft and silky feeling on the skin. Cetyl alcohol is also used as a viscosity controlling agent.
Styrene/Acrylates Copolymer
Est. %1
Function
Origin
Styrene/Acrylates Copolymer
Steareth-21
Est. %0.3
Function
Origin
Steareth-21One of several emulsifiers in the 'steareth' group that helps oils and water mix, especially in highly acidic emulsions. It also offers a cleansing effect to the skin.
Trisiloxane
Est. %0.3
Function
Origin
Trisiloxane
Nylon-12
Est. %0.3
Function
Origin
Nylon-12A synthetic powdered ingredient that imparts unique sensorial characteristics due to its microsphere structure. It can also control viscosity by bulking up the oil phase of a skincare product.
Dimethicone/Vinyl Dimethicone Crosspolymer
Est. %0.3
Function
Origin
Dimethicone/Vinyl Dimethicone CrosspolymerThis ingredient can refer to several kinds of dimethicone crosspolymers. Like other silicones, it makes products feel slippery and non-greasy but can also increase the thickness or improve the water-resistance of a formula.
Stearyl Alcohol
Est. %0.3
Function
Origin
Stearyl AlcoholA natural fatty alcohol that thickens, stabilizes, and keeps emulsions a bright white color. It has many uses, the main one being as an emulsifier. It also acts as an opacifying agent and emollient.
PEG-100 Stearate
Est. %0.3
Function
Origin
PEG-100 StearateThis surfactant is more specifically classified as an emulsifier that produces oil-in-water emulsions. PEG-100 stearate can also be used as a cleansing agent.
Glyceryl Stearate
Est. %0.3
Function
Origin
Glyceryl StearateAn emollient and emulsifier typically derived from vegetable sources through a chemical reaction with glycerin. It provides stability, texture, and consistency to formulations. Its main function is to allow oil and water to mix.
Phenoxyethanol
Est. %0.3
Function
Origin
PhenoxyethanolThe most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Caprylyl Glycol
Est. %0.3
Function
Origin
Caprylyl GlycolAn emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Fragrance
Est. %0.3
Function
Origin
FragranceUnder trade secret law, manufacturers have the right not to disclose what exactly went into the fragrance and use the unspecific word Fragrance or Parfum instead. Many fragrances are highly allergenic.
Chlorphenesin
Est. %0.3
Function
Origin
ChlorphenesinA preservative and broad-spectrum antimicrobial agent that protects products from a wide range of bacteria and fungi.
Xanthan Gum
Est. %0.3
Function
Origin
Xanthan GumA natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Est. %0.3
Function
Origin
Acrylates/C10-30 Alkyl Acrylate CrosspolymerA synthetic ingredient that is used to thicken water and alcohol. It results in a more lightweight formula and is commonly found in gel products.
Hydrolyzed Myrtus Communis Leaf Extract
Est. %0.3
Function
Origin
Hydrolyzed Myrtus Communis Leaf Extract
Polysorbate 20
Est. %0.3
Function
Origin
Polysorbate 20A viscous, amber-colored liquid that functions as a solubilizer to disperse small amounts of oil into a large water phase. Polysorbate 20 is frequently used to solubilize fragrance oils into water-based emulsions.
Retinol
Est. %0.1
Function
Origin
Retinol

One of the most famous and well-researched anti-aging ingredients with a maximum anti-wrinkle power of 10 out of 10. It is proven to decrease wrinkles and help the skin regain its thickness, firmness, and texture. Retinol is also effective in treating pigmentation issues such as dark spots and acne.

BHT
Est. %0.3
Function
Origin
BHTAn antioxidant ingredient that naturally occurs in green algae and some bacteria or fungi but, for commercial use, is created synthetically. BHT is also used occasionally as a fragrance, where it presents a sweet, camphor-like odor.
Sodium Hyaluronate
Est. %0.3
Function
Origin
Sodium Hyaluronate

A sodium salt of famous hyaluronic acid. A potent humectant that hydrates the skin, supports collagen function, and fills out small wrinkles. Sodium hyaluronate also offers soothing and antioxidant properties.

Disodium EDTA
Est. %0.3
Function
Origin
Disodium EDTAA synthetic chelator that helps to maintain the look and smell of a product by 'locking up' troublesome metal ions.
Silica
Est. %0.3
Function
Origin
SilicaA widely used cosmetic ingredient with the same chemical composition as the sand found on beaches. A common function of silica is its ability to control viscosity. In certain chemical forms, it can effectively thicken cream-style products.
Ascorbic Acid
Est. %0.3
Function
Origin
Ascorbic Acid

Also known as vitamin C, this multi-benefit ingredient has proven anti-wrinkle, antioxidant, and anti-pigmentation efficacy. It degrades easily when exposed to air and light, so it requires proper packaging to maintain its stability.

Sodium Hydroxide
Est. %0.3
Function
Origin
Sodium Hydroxide

An ingredient that is able to bring the pH of a product up, thereby making it less harsh on the skin.