Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+ | Unbiased Skincare Efficacy Review by AI

Review

Does Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+ Work?

According to CreamScan AI's analysis of the ingredient list, here’s what Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+ has to offer:

Light moisturizing. It has a moisturizing rating of 2.6 out of 10.

Very high sun protection for prolonged sun exposure, such as spending the day at the beach, hiking, or outdoor sports.

Key Benefits of Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+

These are the key benefits you can expect from using Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+:

Slight Moisturizing When Used Alone

According to CreamScan analysis, Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+ is lightly moisturizing, with a moisturizing rating of 2.6 out of 10.

Is it more humectant or occlusive? Rather humectant. It has a low occlusivity of 1.6 out of 10 and a moderate humectancy of 3.6 out of 10, primarily due to the high content of Glycerin (est. ≈2.0%).

This type of product provides relatively light moisturizing on its own but can contribute to overall moisturizing efficacy when used as part of a skincare routine, alongside another moisturizer.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Very High Sun Protection for Prolonged Sun Exposure, All Skin Types, and High-risk Conditions

With an SPF of 50, Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+ provides very high sun protection, suitable for intense sun exposure in tropical climates, beach vacations, or high-altitude environments.

This level of SPF blocks 98% or more of UVB rays, offering the highest level of defense against sunburn. Broad-spectrum formulations also provide strong protection against UVA rays, which are responsible for skin aging, pigmentation, and DNA damage.

For optimal protection, choose products labeled broad-spectrum to ensure defense against both UVA rays, which contribute to skin aging and pigmentation, and UVB rays that cause sunburn.

This level of SPF is ideal for all skin types, particularly fair, sensitive, or post-treatment skin (e.g., after laser or chemical procedures). It is also highly recommended for individuals at greater risk of skin cancer.

For extended outdoor activities or water exposure, choose a water-resistant formula and reapply every two hours for maximum effectiveness.

Please note that this is not a complete list of benefits. We are in the process of enhancing our AI model to incorporate anti-pigmentation, exfoliation and anti-acne ratings.

Things to Be Aware Of: Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+

CreamScan AI identified a few things to consider before adding Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+ to your skincare routine:

As a Standalone Moisturizer, It Has Relatively Low Moisturizing Potential

If you use Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+ for moisturizing purposes, please keep in mind that it provides relatively light moisturizing on its own, and, more importantly, it’s not optimal for any skin type.

On one hand, it has low occlusivity, which suits oily and combination skin. On the other hand, it has a low estimated concentration of humectants, which are essential for effective moisturizing of all skin types, including oily skin.

Therefore, if used as a standalone moisturizer, this product should be paired with a humectant-rich moisturizer for optimal skin hydration.

Questionable anti-wrinkle efficacy

If one of your main reasons for choosing Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+ is its potential anti-aging effects, please note that, according to CreamScan analysis, it currently has a zero anti-wrinkle rating.

It contains Gluconolactone, an ingredient often marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Gluconolactone provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards.

While this does not categorically exclude the possibility that Gluconolactone may reduce wrinkles, its efficacy is not supported by convincing, vehicle-controlled, double-blind clinical studies - at least none that were accessible to the CreamScan team at the time of publication.

Therefore, this ingredient does not generate the anti-wrinkle rating.

Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, can deliver some anti-wrinkle effects through its moisturizing action.

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Pros & Cons of Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+

Here’s an overview of the pros and cons of Naked Sundays Collagen Glow 100% Mineral Sunscreen SPF 50+ to help you decide if it’s the right choice for your skincare routine:

Pros:

Provides relatively light moisturizing on its own but can contribute to the moisturizing efficacy of any skincare routine

Provides very high sun protection, ideal for intense sun exposure in tropical climates, high-altitude environments, and beach vacations, suitable for all skin types

Cons:

Minimal moisturizing efficacy, even for oily skin - something to keep in mind if this is the only moisturizer in your routine.

Questionable anti-wrinkle efficacy

Antimicrobial
Cleansing
Fragrance
Preservative
Colorant
Flavor
Formula helpers

Other

Est. % The Estimated % is our algorithm-based assumption about an ingredient's concentration in a formula. Learn more The Estimated % is our algorithm-based assumption about an ingredient's concentration in a formula. Learn more	Ingredient	Origin	Functions
50	Water The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients. Water The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.	Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water.	Formula helper Solvent – a liquid that dissolves other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients.
22.75 Verified concentration of an ingredient as indicated on its package, in the ingredient list, or on the official website. Verified concentration of an ingredient as indicated on its package, in the ingredient list, or on the official website.	Zinc Oxide A white mineral powder mainly used in skincare as a physical sunscreen. It protects against UVA light that leads to visible signs of aging, including wrinkles and fine lines. Zinc oxide can also be used as a colorant to enhance the whiteness of a product. Zinc Oxide A white mineral powder mainly used in skincare as a physical sunscreen. It protects against UVA light that leads to visible signs of aging, including wrinkles and fine lines. Zinc oxide can also be used as a colorant to enhance the whiteness of a product.	Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Sunscreen, Sunscreens protect the skin from harmful ultraviolet (UV) radiation by absorbing or reflecting UV light. Sunscreen, Sunscreens protect the skin from harmful ultraviolet (UV) radiation by absorbing or reflecting UV light. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Colorant, Colorants give color to skincare products. Colorant, Colorants give color to skincare products. Formula helper Bulking – increases the volume of a product. Light stabilizing – absorbs UV light to protect ingredients. Formula helper Bulking – increases the volume of a product. Light stabilizing – absorbs UV light to protect ingredients.
6	Coco-Caprylate A naturally-derived or synthetically produced oil with a very light feel. An alternative to silicones, this ingredient spreads quickly and doesn't leave a residue on skin. Coco-Caprylate A naturally-derived or synthetically produced oil with a very light feel. An alternative to silicones, this ingredient spreads quickly and doesn't leave a residue on skin.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients.
4	Octyldodecanol An emollient fatty alcohol that spreads easily without leaving a greasy residue on the skin. It is also used as a solvent and dispersing agent for other ingredients. Octyldodecanol An emollient fatty alcohol that spreads easily without leaving a greasy residue on the skin. It is also used as a solvent and dispersing agent for other ingredients.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients.
3	C10-18 Triglycerides An occlusive ingredient that helps lock in moisture. It provides a soft, smooth feel and melts at body temperature. C10-18 Triglycerides An occlusive ingredient that helps lock in moisture. It provides a soft, smooth feel and melts at body temperature.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Solvent – a liquid that dissolves other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients.
2.5	PEG-30 Dipolyhydroxystearate PEG-30 Dipolyhydroxystearate	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Formula helper Emulsifying – helps to mix water and oil together. Formula helper Emulsifying – helps to mix water and oil together.
2	Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Denaturant – turns alcohol undrinkable. Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product. Formula helper Denaturant – turns alcohol undrinkable. Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product.
1.5	Cetearyl Alcohol A blend of cetyl alcohol and stearyl alcohol, the fatty alcohols that are derived from palm oil. It helps to create emulsions that give off a soft and silky emollient feel and also increase product thickness. Cetearyl Alcohol A blend of cetyl alcohol and stearyl alcohol, the fatty alcohols that are derived from palm oil. It helps to create emulsions that give off a soft and silky emollient feel and also increase product thickness.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Emulsifying – helps to mix water and oil together. Emulsion stabilizing – increases the stability of a formula. Foaming – creates foam of varying densities. Opacifying – reflects light and creates opaque products. Viscosity controlling – changes the thickness of a product. Formula helper Emulsifying – helps to mix water and oil together. Emulsion stabilizing – increases the stability of a formula. Foaming – creates foam of varying densities. Opacifying – reflects light and creates opaque products. Viscosity controlling – changes the thickness of a product.
1.3	Polyglyceryl-3 Polyricinoleate Polyglyceryl-3 Polyricinoleate	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Formula helper Emulsifying – helps to mix water and oil together. Viscosity controlling – changes the thickness of a product. Formula helper Emulsifying – helps to mix water and oil together. Viscosity controlling – changes the thickness of a product.
1	Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging. Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Formula helper Chelating – deactivates harmful heavy metal ions. Formula helper Chelating – deactivates harmful heavy metal ions.
0.3	Isostearic Acid A saturated fatty acid used to mix oil and water and to remove dirt from the skin's surface. Isostearic acid is listed among common comedogenic ingredients by acne.org. Isostearic Acid A saturated fatty acid used to mix oil and water and to remove dirt from the skin's surface. Isostearic acid is listed among common comedogenic ingredients by acne.org.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Cleansing, Cleansing ingredients, also known as surfactants, clear dirt and buildup from the skin. Cleansing, Cleansing ingredients, also known as surfactants, clear dirt and buildup from the skin. Formula helper Binding – bonds ingredients together. Emulsifying – helps to mix water and oil together. Formula helper Binding – bonds ingredients together. Emulsifying – helps to mix water and oil together.
0.3	Sodium Chloride You’re definitely familiar with sodium chloride, even if you don’t think you are. It’s table salt! Salt works well with some cleansing ingredients (surfactants) to thicken them into gels. It also acts as a stabilizer for water-in-oil emulsions. Sodium Chloride You’re definitely familiar with sodium chloride, even if you don’t think you are. It’s table salt! Salt works well with some cleansing ingredients (surfactants) to thicken them into gels. It also acts as a stabilizer for water-in-oil emulsions.	Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Formula helper Bulking – increases the volume of a product. Viscosity controlling – changes the thickness of a product. Formula helper Bulking – increases the volume of a product. Viscosity controlling – changes the thickness of a product.
0.3	Cetearyl Glucoside An emulsifier that creates stable mixtures of oil in water that feel soft and spread easily. Cetearyl glucoside is sold with cetearyl alcohol as an emulsifier blend and also provides some body to the formula. Cetearyl Glucoside An emulsifier that creates stable mixtures of oil in water that feel soft and spread easily. Cetearyl glucoside is sold with cetearyl alcohol as an emulsifier blend and also provides some body to the formula.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Formula helper Emulsifying – helps to mix water and oil together. Formula helper Emulsifying – helps to mix water and oil together.
0.3	Sodium Benzoate A preservative that usually works in combination with other preservatives. It has to be at low pH (<5.5) to be effective. Sodium Benzoate A preservative that usually works in combination with other preservatives. It has to be at low pH (<5.5) to be effective.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Formula helper Anticorrosive – softens the effects of harsh ingredients. Formula helper Anticorrosive – softens the effects of harsh ingredients.
0.3	Xanthan Gum A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together. Xanthan Gum A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified.	Formula helper Binding – bonds ingredients together. Emulsifying – helps to mix water and oil together. Emulsion stabilizing – increases the stability of a formula. Gel-forming – helps to create a gel by swelling. Viscosity controlling – changes the thickness of a product. Formula helper Binding – bonds ingredients together. Emulsifying – helps to mix water and oil together. Emulsion stabilizing – increases the stability of a formula. Gel-forming – helps to create a gel by swelling. Viscosity controlling – changes the thickness of a product.
0.3	Iron Oxides (CI 77492) Also known as iron (III) oxide, this ingredient is a yellow-colored pigment that can either be derived from minerals or produced synthetically. It adds yellow tones to cosmetic products. Iron Oxides (CI 77492) Also known as iron (III) oxide, this ingredient is a yellow-colored pigment that can either be derived from minerals or produced synthetically. It adds yellow tones to cosmetic products.	Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Colorant Colorants give color to skincare products. Colorant Colorants give color to skincare products.
0.3	Disodium EDTA A synthetic chelator that helps to maintain the look and smell of a product by 'locking up' troublesome metal ions. Disodium EDTA A synthetic chelator that helps to maintain the look and smell of a product by 'locking up' troublesome metal ions.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Formula helper Chelating – deactivates harmful heavy metal ions. Viscosity controlling – changes the thickness of a product. Formula helper Chelating – deactivates harmful heavy metal ions. Viscosity controlling – changes the thickness of a product.
0.3	Citrullus Lanatus (Watermelon) Seed Oil A fatty oil derived from watermelon seeds that contains a good amount of occlusive moisturizing and emollient linoleic acid, followed by oleic and palmitic acids. Citrullus Lanatus (Watermelon) Seed Oil A fatty oil derived from watermelon seeds that contains a good amount of occlusive moisturizing and emollient linoleic acid, followed by oleic and palmitic acids.	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients.
0.3	Hydrolyzed Soy Protein A mixture of proteins obtained from soybeans. It can have many different functions depending on the manufacturer, although it is most commonly used in skincare products as a humectant moisturizing ingredient. Hydrolyzed Soy Protein A mixture of proteins obtained from soybeans. It can have many different functions depending on the manufacturer, although it is most commonly used in skincare products as a humectant moisturizing ingredient.	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Formula helper Antistatic – reduces electric charge buildup. Formula helper Antistatic – reduces electric charge buildup.
0.3	Hydrolyzed Rice Protein A protein derived from rice bran with film-forming abilities. It can help increase moisturization in skin. Hydrolyzed Rice Protein A protein derived from rice bran with film-forming abilities. It can help increase moisturization in skin.	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.	Formula helper Antistatic – reduces electric charge buildup. Film-forming – creates a film to increase wear time. Formula helper Antistatic – reduces electric charge buildup. Film-forming – creates a film to increase wear time.
0.3	Iron Oxides (CI 77499) A black colorant also known as black iron oxide used in a wide range of skincare products. Iron Oxides (CI 77499) A black colorant also known as black iron oxide used in a wide range of skincare products.	Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Colorant Colorants give color to skincare products. Colorant Colorants give color to skincare products.
0.3	Hydrolyzed Adansonia Digitata Extract Hydrolyzed Adansonia Digitata Extract	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.	Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients.
0.3	Proline The best humectant moisturizer of all the amino acids. It is a part of the skin's Natural Moisturizing Factor and increases hydration in the top layers of the skin. It also has antioxidant activity and helps to heal damaged skin. Proline The best humectant moisturizer of all the amino acids. It is a part of the skin's Natural Moisturizing Factor and increases hydration in the top layers of the skin. It also has antioxidant activity and helps to heal damaged skin.	Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Moisturizing (Humectant) Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant) Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid).

Water

Function:

Origin:

22.75

Zinc Oxide

Function:

Origin:

Coco-Caprylate

Function:

Origin:

Octyldodecanol

Function:

Origin:

C10-18 Triglycerides

Function:

Origin:

2.5

PEG-30 Dipolyhydroxystearate

Function:

Origin:

Glycerin

Function:

Origin:

1.5

Cetearyl Alcohol

Function:

Origin:

1.3

Polyglyceryl-3 Polyricinoleate

Function:

Origin:

Gluconolactone

Function:

Origin:

0.3

Isostearic Acid

Function:

Origin:

0.3

Sodium Chloride

Function:

Origin:

0.3

Cetearyl Glucoside

Function:

Origin:

0.3

Sodium Benzoate

Function:

Origin:

0.3

Xanthan Gum

Function:

Origin:

0.3

Iron Oxides (CI 77492)

Function:

Origin:

0.3

Disodium EDTA

Function:

Origin:

0.3

Citrullus Lanatus (Watermelon) Seed Oil

Function:

Origin:

0.3

Hydrolyzed Soy Protein

Function:

Origin:

0.3

Hydrolyzed Rice Protein

Function:

Origin:

0.3

Iron Oxides (CI 77499)

Function:

Origin:

0.3

Hydrolyzed Adansonia Digitata Extract

Function:

Origin:

0.3

Proline

Function:

Origin:

Ratings

Glycerin

Gluconolactone

Hydrolyzed Soy Protein

0.3

Proline

0.3

Benchmark

C10-18 Triglycerides

3.0

Citrullus Lanatus (Watermelon) Seed Oil

0.3

Benchmark

Moisturizing rating

2.6

Ingredient		Est. %	Benchmark Sciense based points to which we compare all humectants and all occlusives in a product to calculate its Humectancy and Occlusivity. Sciense based points to which we compare all humectants and all occlusives in a product to calculate its Humectancy and Occlusivity.	Raiting
Humectancy	All humectants	3.6	10	3.6
	Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	2
	Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging. Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.	1
	Hydrolyzed Soy Protein A mixture of proteins obtained from soybeans. It can have many different functions depending on the manufacturer, although it is most commonly used in skincare products as a humectant moisturizing ingredient. Hydrolyzed Soy Protein A mixture of proteins obtained from soybeans. It can have many different functions depending on the manufacturer, although it is most commonly used in skincare products as a humectant moisturizing ingredient.	0.3
	Proline The best humectant moisturizer of all the amino acids. It is a part of the skin's Natural Moisturizing Factor and increases hydration in the top layers of the skin. It also has antioxidant activity and helps to heal damaged skin. Proline The best humectant moisturizer of all the amino acids. It is a part of the skin's Natural Moisturizing Factor and increases hydration in the top layers of the skin. It also has antioxidant activity and helps to heal damaged skin.	0.3
Occlusivity	All occlusives	3.3	20	1.6
	C10-18 Triglycerides An occlusive ingredient that helps lock in moisture. It provides a soft, smooth feel and melts at body temperature. C10-18 Triglycerides An occlusive ingredient that helps lock in moisture. It provides a soft, smooth feel and melts at body temperature.	3.0
	Citrullus Lanatus (Watermelon) Seed Oil A fatty oil derived from watermelon seeds that contains a good amount of occlusive moisturizing and emollient linoleic acid, followed by oleic and palmitic acids. Citrullus Lanatus (Watermelon) Seed Oil A fatty oil derived from watermelon seeds that contains a good amount of occlusive moisturizing and emollient linoleic acid, followed by oleic and palmitic acids.	0.3
Moisturizing rating				2.6

Ingredient	Est. %	Benchmark According to various studies, a formula made up of 10% humectants will significantly increase skin hydration. Some studies also suggest that any further icrease in the consentration of humectants does not translate inty any more hydration and may even be dehydrating. To achieve maximum Humectancy, the product should have humectants with a total score of 10 and more. According to various studies, a formula made up of 10% humectants will significantly increase skin hydration. Some studies also suggest that any further icrease in the consentration of humectants does not translate inty any more hydration and may even be dehydrating. To achieve maximum Humectancy, the product should have humectants with a total score of 10 and more.	Humectancy
Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	2
Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging. Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.	1
Hydrolyzed Soy Protein A mixture of proteins obtained from soybeans. It can have many different functions depending on the manufacturer, although it is most commonly used in skincare products as a humectant moisturizing ingredient. Hydrolyzed Soy Protein A mixture of proteins obtained from soybeans. It can have many different functions depending on the manufacturer, although it is most commonly used in skincare products as a humectant moisturizing ingredient.	0.3
Proline The best humectant moisturizer of all the amino acids. It is a part of the skin's Natural Moisturizing Factor and increases hydration in the top layers of the skin. It also has antioxidant activity and helps to heal damaged skin. Proline The best humectant moisturizer of all the amino acids. It is a part of the skin's Natural Moisturizing Factor and increases hydration in the top layers of the skin. It also has antioxidant activity and helps to heal damaged skin.	0.3
All humectants	3.6	10	3.6

Glycerin

Gluconolactone

Hydrolyzed Soy Protein

0.3

Proline

0.3

Benchmark

Ingredient	Est. %	Benchmark The most occlusive product possible is 100% petrolatum (hello Vaseline Jelly). According to studies, hovewer, even 10% petrolatum can achieve almost the same mosturizing effect. The occlusive properties of petrolatum are at least twice as superior as other occlusive ingredients. This is why, in order to match the moisturizing efficacy of 10% petrolatum, a product needs to contain at least 20% of other occlusives. Our benchmark for maximum Occlusivity is 20 (and the petrolatum score is always doubled). The most occlusive product possible is 100% petrolatum (hello Vaseline Jelly). According to studies, hovewer, even 10% petrolatum can achieve almost the same mosturizing effect. The occlusive properties of petrolatum are at least twice as superior as other occlusive ingredients. This is why, in order to match the moisturizing efficacy of 10% petrolatum, a product needs to contain at least 20% of other occlusives. Our benchmark for maximum Occlusivity is 20 (and the petrolatum score is always doubled).	Occlusivity
C10-18 Triglycerides An occlusive ingredient that helps lock in moisture. It provides a soft, smooth feel and melts at body temperature. C10-18 Triglycerides An occlusive ingredient that helps lock in moisture. It provides a soft, smooth feel and melts at body temperature.	3
Citrullus Lanatus (Watermelon) Seed Oil A fatty oil derived from watermelon seeds that contains a good amount of occlusive moisturizing and emollient linoleic acid, followed by oleic and palmitic acids. Citrullus Lanatus (Watermelon) Seed Oil A fatty oil derived from watermelon seeds that contains a good amount of occlusive moisturizing and emollient linoleic acid, followed by oleic and palmitic acids.	0.3
All occlusives	3.3	20	1.6

C10-18 Triglycerides

3.0

Citrullus Lanatus (Watermelon) Seed Oil

0.3

Benchmark

Ingredient	Ingredient anti-wrinkle power Shows on a scale of 0-10 how effective an ingredient is at reducing wrinkles. Both the Reported Efficacy of the ingredient and the Strength of Evidence are taken into account. Shows on a scale of 0-10 how effective an ingredient is at reducing wrinkles. Both the Reported Efficacy of the ingredient and the Strength of Evidence are taken into account.	when present at, %	in this formula est. %	Rating
Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging. Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.	n/a This ingredient is marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of this ingredient provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient do not contribute to the anti-wrinkle rating. This ingredient is marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of this ingredient provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient do not contribute to the anti-wrinkle rating.	-	1	-
Total				0

Gluconolactone

Ingredient anti-wrinkle power

n/a

when present at, %

in this formula, est. %

Anti-wrinkle rating

Ingredient	Est. %	Benchmark It differs from one antioxidant ingredient to another, but, on average, the research suggests that topically applied antioxidants are effective in consentrations of 3% or above. Any product with a total antioxidant score of 3 or more is considered to be reach in antioxidants. It differs from one antioxidant ingredient to another, but, on average, the research suggests that topically applied antioxidants are effective in consentrations of 3% or above. Any product with a total antioxidant score of 3 or more is considered to be reach in antioxidants.	Rich in Antioxidants
None
All antioxidants	0	3	No

None

Benchmark

Ingredient	Est. %	Benchmark The effective concentration of soothing ingredients varies, but we consider a product rich in soothing ingredients if their estimated concentration is equal to or higher than 5%. The effective concentration of soothing ingredients varies, but we consider a product rich in soothing ingredients if their estimated concentration is equal to or higher than 5%.	Rich in Soothing
None
All soothing	0	5	No

None

Benchmark

Ingredients explained

Water
Est. %	50
Function	Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water.

The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.

Zinc Oxide
Est. %	22.75
Function	Sunscreen, Sunscreens protect the skin from harmful ultraviolet (UV) radiation by absorbing or reflecting UV light. Sunscreen, Sunscreens protect the skin from harmful ultraviolet (UV) radiation by absorbing or reflecting UV light. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Colorant, Colorants give color to skincare products. Colorant, Colorants give color to skincare products. Bulking, Bulking – increases the volume of a product. Bulking, Bulking – increases the volume of a product. Light Stabilizing Light stabilizing – absorbs UV light to protect ingredients. Light Stabilizing Light stabilizing – absorbs UV light to protect ingredients.
Origin	Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A white mineral powder mainly used in skincare as a physical sunscreen. It protects against UVA light that leads to visible signs of aging, including wrinkles and fine lines. Zinc oxide can also be used as a colorant to enhance the whiteness of a product.

Coco-Caprylate
Est. %	6
Function	Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A naturally-derived or synthetically produced oil with a very light feel. An alternative to silicones, this ingredient spreads quickly and doesn't leave a residue on skin.

Octyldodecanol
Est. %	4
Function	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

An emollient fatty alcohol that spreads easily without leaving a greasy residue on the skin. It is also used as a solvent and dispersing agent for other ingredients.

C10-18 Triglycerides
Est. %	3
Function	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

An occlusive ingredient that helps lock in moisture. It provides a soft, smooth feel and melts at body temperature.

PEG-30 Dipolyhydroxystearate
Est. %	2.5
Function	Emulsifying Emulsifying – helps to mix water and oil together. Emulsifying Emulsifying – helps to mix water and oil together.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

Glycerin
Est. %	2
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Denaturant, Denaturant – turns alcohol undrinkable. Denaturant, Denaturant – turns alcohol undrinkable. Solvent, Solvent – a liquid that dissolves other ingredients. Solvent, Solvent – a liquid that dissolves other ingredients. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Cetearyl Alcohol
Est. %	1.5
Function	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Foaming, Foaming – creates foam of varying densities. Foaming, Foaming – creates foam of varying densities. Opacifying, Opacifying – reflects light and creates opaque products. Opacifying, Opacifying – reflects light and creates opaque products. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A blend of cetyl alcohol and stearyl alcohol, the fatty alcohols that are derived from palm oil. It helps to create emulsions that give off a soft and silky emollient feel and also increase product thickness.

Polyglyceryl-3 Polyricinoleate
Est. %	1.3
Function	Emulsifying, Emulsifying – helps to mix water and oil together. Emulsifying, Emulsifying – helps to mix water and oil together. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

Gluconolactone
Est. %	1
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Chelating Chelating – deactivates harmful heavy metal ions. Chelating Chelating – deactivates harmful heavy metal ions.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.

Isostearic Acid
Est. %	0.3
Function	Cleansing, Cleansing ingredients, also known as surfactants, clear dirt and buildup from the skin. Cleansing, Cleansing ingredients, also known as surfactants, clear dirt and buildup from the skin. Binding, Binding – bonds ingredients together. Binding, Binding – bonds ingredients together. Emulsifying Emulsifying – helps to mix water and oil together. Emulsifying Emulsifying – helps to mix water and oil together.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

A saturated fatty acid used to mix oil and water and to remove dirt from the skin's surface. Isostearic acid is listed among common comedogenic ingredients by acne.org.

Sodium Chloride
Est. %	0.3
Function	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Bulking, Bulking – increases the volume of a product. Bulking, Bulking – increases the volume of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

You’re definitely familiar with sodium chloride, even if you don’t think you are. It’s table salt! Salt works well with some cleansing ingredients (surfactants) to thicken them into gels. It also acts as a stabilizer for water-in-oil emulsions.

Cetearyl Glucoside
Est. %	0.3
Function	Emulsifying Emulsifying – helps to mix water and oil together. Emulsifying Emulsifying – helps to mix water and oil together.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

An emulsifier that creates stable mixtures of oil in water that feel soft and spread easily. Cetearyl glucoside is sold with cetearyl alcohol as an emulsifier blend and also provides some body to the formula.

Sodium Benzoate
Est. %	0.3
Function	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Preservative, Preservatives prevent the growth of bacteria and fungi in a product. Anticorrosive Anticorrosive – softens the effects of harsh ingredients. Anticorrosive Anticorrosive – softens the effects of harsh ingredients.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A preservative that usually works in combination with other preservatives. It has to be at low pH (<5.5) to be effective.

Xanthan Gum
Est. %	0.3
Function	Binding, Binding – bonds ingredients together. Binding, Binding – bonds ingredients together. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Gel-Forming, Gel-forming – helps to create a gel by swelling. Gel-Forming, Gel-forming – helps to create a gel by swelling. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified. Biotech The biotech origin of the ingredient implies that it was made in a lab using cultured microorganisms (bacteria or fungi) and a substrate (e.g. through the fermentation process), and then extracted and/or purified.

A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.

Iron Oxides (CI 77492)
Est. %	0.3
Function	Colorant Colorants give color to skincare products. Colorant Colorants give color to skincare products.
Origin	Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

Also known as iron (III) oxide, this ingredient is a yellow-colored pigment that can either be derived from minerals or produced synthetically. It adds yellow tones to cosmetic products.

Disodium EDTA
Est. %	0.3
Function	Chelating, Chelating – deactivates harmful heavy metal ions. Chelating, Chelating – deactivates harmful heavy metal ions. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A synthetic chelator that helps to maintain the look and smell of a product by 'locking up' troublesome metal ions.

Citrullus Lanatus (Watermelon) Seed Oil
Est. %	0.3
Function	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients.
Origin	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.

A fatty oil derived from watermelon seeds that contains a good amount of occlusive moisturizing and emollient linoleic acid, followed by oleic and palmitic acids.

Hydrolyzed Soy Protein
Est. %	0.3
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Antistatic Antistatic – reduces electric charge buildup. Antistatic Antistatic – reduces electric charge buildup.
Origin	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.

A mixture of proteins obtained from soybeans. It can have many different functions depending on the manufacturer, although it is most commonly used in skincare products as a humectant moisturizing ingredient.

Hydrolyzed Rice Protein
Est. %	0.3
Function	Antistatic, Antistatic – reduces electric charge buildup. Antistatic, Antistatic – reduces electric charge buildup. Film-Forming Film-forming – creates a film to increase wear time. Film-Forming Film-forming – creates a film to increase wear time.
Origin	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.

A protein derived from rice bran with film-forming abilities. It can help increase moisturization in skin.

Iron Oxides (CI 77499)
Est. %	0.3
Function	Colorant Colorants give color to skincare products. Colorant Colorants give color to skincare products.
Origin	Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A black colorant also known as black iron oxide used in a wide range of skincare products.

Hydrolyzed Adansonia Digitata Extract
Est. %	0.3
Function	Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients.
Origin	Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials.

Proline
Est. %	0.3
Function	Moisturizing (Humectant) Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant) Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid).
Origin	Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

The best humectant moisturizer of all the amino acids. It is a part of the skin's Natural Moisturizing Factor and increases hydration in the top layers of the skin. It also has antioxidant activity and helps to heal damaged skin.