HELIOCARE Pediatrics Mineral SPF50+ Review

HELIOCARE Pediatrics Mineral SPF50+
3.2
/ 10
Moisturizing
3.1 Humectancy icon Humectancy
3.3 Occlusivity icon Occlusivity
2Anti-wrinkle icon/ 10
Anti-wrinkle
50
SPF icon
SPF
Review

Does HELIOCARE Pediatrics Mineral SPF50+ Work?

 
According to CreamScan AI's analysis of the ingredient list, here’s what HELIOCARE Pediatrics Mineral SPF50+ has to offer:
 
  • Light moisturizing. It has a moisturizing rating of 3.2 out of 10.
  • Modest anti-wrinkle efficacy: HELIOCARE Pediatrics Mineral SPF50+ has an anti-wrinkle rating of 2.0 out of 10 so you may expect some, although limited, effect on wrinkles.
  • Very high sun protection for prolonged sun exposure, such as spending the day at the beach, hiking, or outdoor sports.

Key Benefits of HELIOCARE Pediatrics Mineral SPF50+

 
These are the key benefits you can expect from using HELIOCARE Pediatrics Mineral SPF50+:
 

Basic Moisturizer for Combination and Oily Skin

According to CreamScan analysis, HELIOCARE Pediatrics Mineral SPF50+ is lightly moisturizing, with a moisturizing rating of 3.2 out of 10.

Is it more humectant or occlusive? This product has relatively comparable levels of humectancy and occlusivity: a moderate humectancy of 3.1 out of 10 and a moderate occlusivity of 3.3 out of 10, primarily due to the high content of Dimethicone (est. ≈6.0%).

This product, when used alone as a moisturizer, provides moderate hydration in a relatively lightweight, non-greasy formula. This could work for people with oily skin who need a basic level of hydration.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Modest Anti-Wrinkle Efficacy

According to CreamScan analysis, HELIOCARE Pediatrics Mineral SPF50+ has a modest level of anti-wrinkle efficacy, rated 2.0 out of 10.

It contains one ingredient with proven anti-wrinkle efficacy: Niacinamide (est. ≈1.3%), 
 one of the most effective and well-researched anti-wrinkle ingredients. A clinical study involving 30 participants (Kawada et al.) confirmed that a cream with 4% niacinamide reduced the average depth of wrinkles around the eyes by 9% after 8 weeks of use, compared to a vehicle (the same formulation without niacinamide).
 
Among others, HELIOCARE Pediatrics Mineral SPF50+ also contains 3-O-Ethyl Ascorbic Acid, an ingredient often marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of 3-O-Ethyl Ascorbic Acid provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not contribute to the anti-wrinkle rating.
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, can deliver some anti-wrinkle effects through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Very high sun protection for prolonged sun exposure, all skin types, and high-risk conditions

With an SPF of 50, HELIOCARE Pediatrics Mineral SPF50+ provides very high sun protection, suitable for intense sun exposure in tropical climates, beach vacations, or high-altitude environments.

This level of SPF blocks 98% or more of UVB rays, offering the highest level of defense against sunburn. Broad-spectrum formulations also provide strong protection against UVA rays, which are responsible for skin aging, pigmentation, and DNA damage.

For optimal protection, choose products labeled broad-spectrum to ensure defense against both UVA rays, which contribute to skin aging and pigmentation, and UVB rays that cause sunburn.

This level of SPF is ideal for all skin types, particularly fair, sensitive, or post-treatment skin (e.g., after laser or chemical procedures). It is also highly recommended for individuals at greater risk of skin cancer.

For extended outdoor activities or water exposure, choose a water-resistant formula and reapply every two hours for maximum effectiveness.

Please note that this is not a complete list of benefits. We are in the process of enhancing our AI model to incorporate anti-pigmentation, exfoliation and anti-acne ratings.

Pros & Cons of HELIOCARE Pediatrics Mineral SPF50+

 
Here’s an overview of the pros and cons of HELIOCARE Pediatrics Mineral SPF50+ to help you decide if it’s the right choice for your skincare routine:
 

Pros:

  • Basic moisturizing that can work for combination and oily skin
  • Lightweight texture
  • Can enhance the moisturizing efficacy of a skincare routine for normal skin
  • Offers modest anti-wrinkle efficacy
  • Provides very high sun protection, ideal for intense sun exposure in tropical climates, high-altitude environments, and beach vacations, suitable for all skin types

Cons: 

Ingredients

Est. % Ingredient Origin Functions
60
9
6
4
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Water
Function:
Origin:
C12-15 Alkyl Benzoate
Function:
Origin:
Dimethicone
Function:
Origin:
Isododecane
Function:
Origin:
Titanium Dioxide (CI 77891)
Function:
Origin:
Zinc Oxide
Function:
Origin:
Butyloctyl Salicylate
Function:
Origin:
Sodium Potassium Aluminum Silicate
Function:
Origin:
Niacinamide
Function:
Origin:
Alumina
Function:
Origin:
Styrene/Acrylates Copolymer
Function:
Origin:
Phenethyl Benzoate
Function:
Origin:
PEG-9 Polydimethylsiloxyethyl Dimethicone
Function:
Origin:
Polypodium Leucotomos Leaf Extract
Function:
Origin:
Physalis Angulata Extract
Function:
Origin:
Melanin
Function:
Origin:
Plankton Extract
Function:
Origin:
3-O-Ethyl Ascorbic Acid
Function:
Origin:
Oxothiazolidine
Function:
Origin:
Tocopheryl Acetate
Function:
Origin:
Hydrogen Dimethicone
Function:
Origin:
Phenylpropanol
Function:
Origin:
Polyhydroxystearic Acid
Function:
Origin:
Magnesium Sulfate
Function:
Origin:
Dimethicone/PEG-10/15 Crosspolymer
Function:
Origin:
Propylene Glycol
Function:
Origin:
Caprylyl Glycol
Function:
Origin:
Silica
Function:
Origin:
Propanediol
Function:
Origin:
Triethoxycaprylylsilane
Function:
Origin:
Caprylic/Capric Triglyceride
Function:
Origin:
Tocopherol
Function:
Origin:
Butylene Glycol
Function:
Origin:
Dipropylene Glycol
Function:
Origin:
Sodium Citrate
Function:
Origin:
Disteardimonium Hectorite
Function:
Origin:
Propylene Carbonate
Function:
Origin:
Lecithin
Function:
Origin:
Phenoxyethanol
Function:
Origin:
Sodium Benzoate
Function:
Origin:

Ratings

All humectants
3.1
1.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
All occlusives
6.6
6.0
0.3
0.3
Benchmark
20
Moisturizing rating
3.2
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 3.1 10
3.1
1.3
0.3
0.3
0.3
0.3
0.3
0.3
Occlusivity All occlusives 6.6 20
3.3
6.0
0.3
0.3
Moisturizing rating
3.2
Ingredient Est. % Benchmark Humectancy
1.3
0.3
0.3
0.3
0.3
0.3
0.3
All humectants 3.1 10
3.1
All humectants
3.1
1.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
6
0.3
0.3
All occlusives 6.6 20
3.3
All occlusives
6.6
6.0
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
6 /10 4 1.3 2
n/a
- 0.3 -
Total
2
Niacinamide
2
Ingredient anti-wrinkle power
6 /10
when present at, %
4
in this formula, est. %
1.3
3-O-Ethyl Ascorbic Acid
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
2
Ingredient Est. % Benchmark
Rich in Antioxidants
1.3
0.3
0.3
0.3
0.3
All antioxidants 2.5 3 No
All antioxidants
2.5
Niacinamide
1.3
Polypodium Leucotomos Leaf Extract
0.3
3-O-Ethyl Ascorbic Acid
0.3
Tocopheryl Acetate
0.3
Tocopherol
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
1.3
All soothing 1.3 5 No
All soothing
1.3
1.3
Benchmark
5

Ingredients explained

Water
Est. %60
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
C12-15 Alkyl Benzoate
Est. %9
Function
Origin
C12-15 Alkyl BenzoateA synthetic emollient ester. It works to improve the appearance of the skin by filling in the microcracks on the surface, thereby making the skin appear softer and smoother. It imparts a lightweight, velvety feel.
Dimethicone
Est. %6
Function
Origin
DimethiconeThe most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
Isododecane
Est. %4
Function
Origin
IsododecaneAn emollient derived from petroleum with high spreadability. It is often used as a replacement for oils and silicones because it leaves no residue behind on the skin. When a product is labeled as “oil-free” it may contain isododecane instead of heavier oils.
Titanium Dioxide (CI 77891)
Est. %3
Function
Origin
Titanium Dioxide (CI 77891)One of two the most commonly used mineral sunscreens. It can absorb UV light, including UVB – which causes burning, tanning, and even skin cancer. Also used as a colorant, titanium dioxide gives a product a bright white color.
Zinc Oxide
Est. %2.5
Function
Origin
Zinc OxideA white mineral powder mainly used in skincare as a physical sunscreen. It protects against UVA light that leads to visible signs of aging, including wrinkles and fine lines. Zinc oxide can also be used as a colorant to enhance the whiteness of a product.
Butyloctyl Salicylate
Est. %2
Function
Origin
Butyloctyl SalicylateA synthetic emollient and solvent. It is primarily used as a carrier oil to disperse minerals in, including pigments and sunscreen minerals. It can also absorb UV light, thus boosting the SPF of sunscreen products.
Sodium Potassium Aluminum Silicate
Est. %1.5
Function
Origin
Sodium Potassium Aluminum Silicate
Niacinamide
Est. %1.3
Function
Origin
Niacinamide

Also known as vitamin B3, this ingredient is a true superstar with confirmed moisturizing, anti-acne, hyperpigmentation, and antioxidant benefits. Two studies confirm its significant anti-wrinkle efficacy.

Alumina
Est. %1
Function
Origin
AluminaA mineral derived from the metal ore known as aluminum. It is commonly used as an abrasive and also acts as a thickening viscosity controlling agent (and thus as a bulking agent). Alumina is also a great opacifier.
Styrene/Acrylates Copolymer
Est. %0.3
Function
Origin
Styrene/Acrylates Copolymer
Phenethyl Benzoate
Est. %0.3
Function
Origin
Phenethyl Benzoate
PEG-9 Polydimethylsiloxyethyl Dimethicone
Est. %0.3
Function
Origin
PEG-9 Polydimethylsiloxyethyl Dimethicone
Polypodium Leucotomos Leaf Extract
Est. %0.3
Function
Origin
Polypodium Leucotomos Leaf Extract
Physalis Angulata Extract
Est. %0.3
Function
Origin
Physalis Angulata Extract
Melanin
Est. %0.3
Function
Origin
Melanin
Plankton Extract
Est. %0.3
Function
Origin
Plankton ExtractAn extract from a mixture of various tiny marine animals, algae, seaweeds, and microscopic organisms jointly called plankton. One patent refers to it as a moisturizing humectant ingredient.
3-O-Ethyl Ascorbic Acid
Est. %0.3
Function
Origin
3-O-Ethyl Ascorbic AcidA derivative of vitamin C. Its stability in skincare formulations is better than ascorbic acid’s, although clinical studies are yet to indicate whether it has the same collagen-boosting benefits.
Oxothiazolidine
Est. %0.3
Function
Origin
Oxothiazolidine
Tocopheryl Acetate
Est. %0.3
Function
Origin
Tocopheryl Acetate

An antioxidant derivative of tocopherol (vitamin E). It helps to protect cells from free radicals and UV damage through the conversion to active vitamin E in the skin. It is more stable than tocopherol.

Hydrogen Dimethicone
Est. %0.3
Function
Origin
Hydrogen Dimethicone
Phenylpropanol
Est. %0.3
Function
Origin
PhenylpropanolPhenylpropanol is a naturally occurring component of many essential oils. It is a colourless, oily liquid with a sweet, floral, balsamic scent. It is used in skincare as a solvent for oil-soluble ingredients and as a fragrance component.
Polyhydroxystearic Acid
Est. %0.3
Function
Origin
Polyhydroxystearic AcidA soft and malleable amber wax naturally derived from vegetable sources. It allows minerals to be very finely dispersed, which can improve SPF, decrease the white cast in sunscreens, and increase the color expression in pigmented products.
Magnesium Sulfate
Est. %0.3
Function
Origin
Magnesium SulfateA naturally occurring mineral that is commonly used in skincare products as a bulking agent. It helps to control the viscosity of products by making them thicker.
Dimethicone/PEG-10/15 Crosspolymer
Est. %0.3
Function
Origin
Dimethicone/PEG-10/15 CrosspolymerA self-emulsifying surfactant, which means that it can help facilitate the formation of water-in-silicone emulsions. This results in lightweight formulas with a soft finish. It can also act as a film-former and thickener.
Propylene Glycol
Est. %0.3
Function
Origin
Propylene GlycolA clear, thick, odorless liquid of synthetic origin. Its main function is to stabilize cosmetic products exposed to varying temperatures. It is also a moderately strong humectant with similar properties to glycerin.
Caprylyl Glycol
Est. %0.3
Function
Origin
Caprylyl GlycolAn emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Silica
Est. %0.3
Function
Origin
SilicaA widely used cosmetic ingredient with the same chemical composition as the sand found on beaches. A common function of silica is its ability to control viscosity. In certain chemical forms, it can effectively thicken cream-style products.
Propanediol
Est. %0.3
Function
Origin
PropanediolAn excellent solvent capable of mixing water with normally water-insoluble ingredients. It also functions as a humectant due to its water-loving alcohol groups. Propanediol can control the viscosity of a product by reducing its thickness.
Triethoxycaprylylsilane
Est. %0.3
Function
Origin
TriethoxycaprylylsilaneA binding and coating ingredient that allows pigments like iron oxides and mica to disperse better in oily environments. This leads to more vibrant colors.
Caprylic/Capric Triglyceride
Est. %0.3
Function
Origin
Caprylic/Capric TriglycerideA natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss.
Tocopherol
Est. %0.3
Function
Origin
Tocopherol

Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.

Butylene Glycol
Est. %0.3
Function
Origin
Butylene Glycol

A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.

Dipropylene Glycol
Est. %0.3
Function
Origin
Dipropylene GlycolA clear, colorless liquid that has several uses. One of its main functions is as a solvent. Dipropylene glycol is also used to reduce the thickness of skincare products.
Sodium Citrate
Est. %0.3
Function
Origin
Sodium CitrateA salt of citric acid that has a salty and tart flavor and is used as a fragrance. It is mildly basic, meaning that its addition to a skincare product can adjust the pH upward.
Disteardimonium Hectorite
Est. %0.3
Function
Origin
Disteardimonium HectoriteA clay ingredient that functions primarily as a viscosity controlling agent that thickens all types of formulas. Disteardimonium hectorite imparts a smooth, velvety feel, making it a luxurious addition to any formula.
Propylene Carbonate
Est. %0.3
Function
Origin
Propylene CarbonateA derivative of propylene glycol that is used most frequently as a solvent. Additionally, propylene carbonate serves as a viscosity controlling agent reducing the thickness of the products it is added to.
Lecithin
Est. %0.3
Function
Origin
LecithinA humectant, emollient, and emulsifier best suited for water-in-oil emulsions. Lecithin can come from sunflowers, soy, and eggs. The downside to lecithin is that it causes an extra burden on the formula’s preservative because it is nutritious.
Phenoxyethanol
Est. %0.3
Function
Origin
PhenoxyethanolThe most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Sodium Benzoate
Est. %0.3
Function
Origin
Sodium BenzoateA preservative that usually works in combination with other preservatives. It has to be at low pH (<5.5) to be effective.