Earth Rhythm Hydrating Matte Set Go Face Fluid Foundation

Earth Rhythm Hydrating Matte Set Go Face Fluid Foundation
2.2
/ 10
Moisturizing
3.4 Humectancy icon Humectancy
0.9 Occlusivity icon Occlusivity
0.4Anti-wrinkle icon/ 10
Anti-wrinkle

Review

Does Earth Rhythm Hydrating Matte Set Go Face Fluid Foundation work?

Based on the ingredient list analysis by CreamScan AI, these are the key benefits you can expect from using Earth Rhythm Hydrating Matte Set Go Face Fluid Foundation:

  • Light moisturizing. It has a moisturizing rating of 2.2 out of 10.
  • Little anti-wrinkle effect: Earth Rhythm Hydrating Matte Set Go Face Fluid Foundation has an anti-wrinkle rating of 0.4 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.

Slight Moisturizing When Used Alone

According to CreamScan analysis, Earth Rhythm Hydrating Matte Set Go Face Fluid Foundation is lightly moisturizing, with a moisturizing rating of 2.2 out of 10.

Is it more humectant or occlusive? Rather humectant. It has a low occlusivity of 0.9 out of 10 and a moderate humectancy of 3.4 out of 10, primarily due to Glycerin (est. ≈1.0%), TEA-Dextrin Octenylsuccinate (est. ≈0.3%) and Propylene Glycol (est. ≈0.3%).

This type of product provides relatively light moisturizing on its own but can contribute to overall moisturizing efficacy when used as part of a skincare routine, alongside another moisturizer.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Little anti-wrinkle efficacy

According to CreamScan analysis, Earth Rhythm Hydrating Matte Set Go Face Fluid Foundation has a minimal anti-wrinkle rating of 0.4 out of 10.

It contains one ingredient with proven anti-wrinkle efficacy: Niacinamide (est. ≈0.3%), 
 one of the most effective and well-researched anti-wrinkle ingredients. A clinical study involving 30 participants (Kawada et al.) confirmed that a cream with 4% niacinamide reduced the average depth of wrinkles around the eyes by 9% after 8 weeks of use, compared to a vehicle (the same formulation without niacinamide).
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, can deliver some anti-wrinkle effects through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Ingredients

Est. % Ingredient Origin Functions
70
6
4
3
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Water
Function:
Origin:
Titanium Dioxide (CI 77891)
Function:
Origin:
Synthetic Fluorphlogopite
Function:
Origin:
Cyclopentasiloxane
Function:
Origin:
C9-11 Isoparaffin
Function:
Origin:
C10-13 Isoparaffin
Function:
Origin:
Ethylhexyl Palmitate
Function:
Origin:
Glycerin
Function:
Origin:
Iron Oxides (CI 77492)
Function:
Origin:
Caprylic/Capric Triglyceride
Function:
Origin:
Trimethylsiloxysilicate
Function:
Origin:
Isopropyl Myristate
Function:
Origin:
Aluminum Starch Octenylsuccinate
Function:
Origin:
TEA-Dextrin Octenylsuccinate
Function:
Origin:
Propylene Glycol
Function:
Origin:
Cyclohexasiloxane
Function:
Origin:
Styrene/Acrylates Copolymer
Function:
Origin:
Tocopherol
Function:
Origin:
Magnesium Stearate
Function:
Origin:
PEG-10 Dimethicone
Function:
Origin:
Cetyl PCA
Function:
Origin:
Dimethicone
Function:
Origin:
PEG-10 Laurate
Function:
Origin:
Trimethoxysilyl Dimethicone
Function:
Origin:
Magnesium Sulfate
Function:
Origin:
Tridecyl Trimellitate
Function:
Origin:
Polymethylsilsesquioxane
Function:
Origin:
Phenoxyethanol
Function:
Origin:
Disteardimonium Hectorite
Function:
Origin:
Iron Oxides (CI 77491)
Function:
Origin:
Propylene Carbonate
Function:
Origin:
Simmondsia Chinensis (Jojoba) Seed Oil
Function:
Origin:
Iron Oxides (CI 77499)
Function:
Origin:
Aloe Barbadensis Extract
Function:
Origin:
Saussurea Involucrata Extract
Function:
Origin:
Niacinamide
Function:
Origin:
Ethylhexylglycerin
Function:
Origin:
Sodium Hyaluronate
Function:
Origin:
Bis-Diglyceryl Polyacyladipate-2
Function:
Origin:
Caprylyl Glycol
Function:
Origin:

Ratings

All humectants
3.4
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
All occlusives
1.8
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
20
Moisturizing rating
2.2
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 3.4 10
3.4
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Occlusivity All occlusives 1.8 20
0.9
0.3
0.3
0.3
0.3
0.3
0.3
Moisturizing rating
2.2
Ingredient Est. % Benchmark Humectancy
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
All humectants 3.4 10
3.4
All humectants
3.4
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
0.3
0.3
0.3
0.3
0.3
0.3
All occlusives 1.8 20
0.9
All occlusives
1.8
0.3
0.3
0.3
0.3
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
6 /10 4 0.3 0.4
Total
0.4
Niacinamide
0.4
Ingredient anti-wrinkle power
6 /10
when present at, %
4
in this formula, est. %
0.3
Anti-wrinkle rating
0.4
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
0.3
All antioxidants 1.2 3 No
All antioxidants
1.2
Niacinamide
0.3
Tocopherol
0.3
Aloe Barbadensis Extract
0.3
Sodium Hyaluronate
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
0.3
All soothing 0.6 5 No
All soothing
0.6
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %70
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Titanium Dioxide (CI 77891)
Est. %6
Function
Origin
Titanium Dioxide (CI 77891)One of two the most commonly used mineral sunscreens. It can absorb UV light, including UVB – which causes burning, tanning, and even skin cancer. Also used as a colorant, titanium dioxide gives a product a bright white color.
Synthetic Fluorphlogopite
Est. %4
Function
Origin
Synthetic FluorphlogopiteAlso known as synthetic mica, this ingredient’s best property is its ability to form thin, sheet-like crystals. This gives products (mostly makeup) great slip.
Cyclopentasiloxane
Est. %3
Function
Origin
CyclopentasiloxaneA lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in.
C9-11 Isoparaffin
Est. %2
Function
Origin
C9-11 Isoparaffin
C10-13 Isoparaffin
Est. %1.5
Function
Origin
C10-13 Isoparaffin
Ethylhexyl Palmitate
Est. %1.3
Function
Origin
Ethylhexyl PalmitateA rich emollient without the oily after-feel, making it a popular replacement for mineral oil. It is derived from natural sources such as palm oil and palm kernel oil. Ethylhexyl palmitate is listed as a common comedogenic ingredient by acne.org.
Glycerin
Est. %1
Function
Origin
Glycerin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Iron Oxides (CI 77492)
Est. %0.3
Function
Origin
Iron Oxides (CI 77492)Also known as iron (III) oxide, this ingredient is a yellow-colored pigment that can either be derived from minerals or produced synthetically. It adds yellow tones to cosmetic products.
Caprylic/Capric Triglyceride
Est. %0.3
Function
Origin
Caprylic/Capric TriglycerideA natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss.
Trimethylsiloxysilicate
Est. %0.3
Function
Origin
TrimethylsiloxysilicateAn occlusive moisturizing and emollient silicone resin that smoothes and softens the appearance of the skin. It also protects a product from rinsing away too easily with water, sweat, or friction.
Isopropyl Myristate
Est. %0.3
Function
Origin
Isopropyl MyristateA fast-spreading, cost-effective, non-greasy emollient that is typically used for lubrication, spreadability, or to remove “tackiness” from a product. Isopropyl Myristate is listed as a common comedogenic ingredient by acne.org.
Aluminum Starch Octenylsuccinate
Est. %0.3
Function
Origin
Aluminum Starch OctenylsuccinateAn absorbent that takes in oils from the skin to reduce the oily sheen. It can also absorb oils from the skincare product itself, resulting in a softer, less greasy product, normally with better spreadability and less tack.
TEA-Dextrin Octenylsuccinate
Est. %0.3
Function
Origin
TEA-Dextrin Octenylsuccinate
Propylene Glycol
Est. %0.3
Function
Origin
Propylene GlycolA clear, thick, odorless liquid of synthetic origin. Its main function is to stabilize cosmetic products exposed to varying temperatures. It is also a moderately strong humectant with similar properties to glycerin.
Cyclohexasiloxane
Est. %0.3
Function
Origin
CyclohexasiloxaneA clear silicone fluid with very low viscosity that is commonly used as a solvent and emollient. It has excellent spreadability, rubs in quickly, and leaves a silky smooth after-feel on the skin.
Styrene/Acrylates Copolymer
Est. %0.3
Function
Origin
Styrene/Acrylates Copolymer
Tocopherol
Est. %0.3
Function
Origin
Tocopherol

Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.

Magnesium Stearate
Est. %0.3
Function
Origin
Magnesium StearateA multifunctional ester that thickens and prevents clumping.
PEG-10 Dimethicone
Est. %0.3
Function
Origin
PEG-10 DimethiconeA polyethylene-based emulsifying ingredient. It has a water-loving portion and an oil-loving portion that help to keep the water and oil phases connected to form an emulsion.
Cetyl PCA
Est. %0.3
Function
Origin
Cetyl PCA
Dimethicone
Est. %0.3
Function
Origin
DimethiconeThe most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
PEG-10 Laurate
Est. %0.3
Function
Origin
PEG-10 Laurate
Trimethoxysilyl Dimethicone
Est. %0.3
Function
Origin
Trimethoxysilyl Dimethicone
Magnesium Sulfate
Est. %0.3
Function
Origin
Magnesium SulfateA naturally occurring mineral that is commonly used in skincare products as a bulking agent. It helps to control the viscosity of products by making them thicker.
Tridecyl Trimellitate
Est. %0.3
Function
Origin
Tridecyl Trimellitate
Polymethylsilsesquioxane
Est. %0.3
Function
Origin
PolymethylsilsesquioxaneA type of spherical powder that functions on a ball-bearing effect in which the tiny microspheres roll around on the skin and create lubricity. Polymethylsilsesquioxane offers extra slip to skincare products and makes the skin feel soft and smooth.
Phenoxyethanol
Est. %0.3
Function
Origin
PhenoxyethanolThe most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Disteardimonium Hectorite
Est. %0.3
Function
Origin
Disteardimonium HectoriteA clay ingredient that functions primarily as a viscosity controlling agent that thickens all types of formulas. Disteardimonium hectorite imparts a smooth, velvety feel, making it a luxurious addition to any formula.
Iron Oxides (CI 77491)
Est. %0.3
Function
Origin
Iron Oxides (CI 77491)A red colorant also known as red iron oxide. This is an EU-approved colorant used in a wide variety of products.
Propylene Carbonate
Est. %0.3
Function
Origin
Propylene CarbonateA derivative of propylene glycol that is used most frequently as a solvent. Additionally, propylene carbonate serves as a viscosity controlling agent reducing the thickness of the products it is added to.
Simmondsia Chinensis (Jojoba) Seed Oil
Est. %0.3
Function
Origin
Simmondsia Chinensis (Jojoba) Seed OilA liquid plant wax, also known as Jojoba oil, pressed from the seeds of Simmondsia chinensis. These seeds can contain up to 50% of liquid wax. It is used as an occlusive moisturizer, emollient, and emulsifier.
Iron Oxides (CI 77499)
Est. %0.3
Function
Origin
Iron Oxides (CI 77499)A black colorant also known as black iron oxide used in a wide range of skincare products.
Aloe Barbadensis Extract
Est. %0.3
Function
Origin
Aloe Barbadensis ExtractAn antioxidant extract from the gelatinous pulp of Aloe vera leaves with humectant moisturizing polysaccharide mucilage. It is suitable for irritated or eczema-prone skin.
Saussurea Involucrata Extract
Est. %0.3
Function
Origin
Saussurea Involucrata Extract
Niacinamide
Est. %0.3
Function
Origin
Niacinamide

Also known as vitamin B3, this ingredient is a true superstar with confirmed moisturizing, anti-acne, hyperpigmentation, and antioxidant benefits. Two studies confirm its significant anti-wrinkle efficacy.

Ethylhexylglycerin
Est. %0.3
Function
Origin
EthylhexylglycerinA preservative booster derived from glycerin. It is commonly paired with other preservatives to improve their efficacy. Ethylhexylglycerin is also a humectant due to its chemical base of glycerin.
Sodium Hyaluronate
Est. %0.3
Function
Origin
Sodium Hyaluronate

A sodium salt of famous hyaluronic acid. A potent humectant that hydrates the skin, supports collagen function, and fills out small wrinkles. Sodium hyaluronate also offers soothing and antioxidant properties.

Bis-Diglyceryl Polyacyladipate-2
Est. %0.3
Function
Origin
Bis-Diglyceryl Polyacyladipate-2An emollient ester that is used as a non-animal substitute for lanolin. Similar to lanolin, it melts at body temperature, making it ideal for use in body butters, lip balms, and ointments.
Caprylyl Glycol
Est. %0.3
Function
Origin
Caprylyl GlycolAn emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.