CeraVe Hydrating Sunscreen SPF 30 Face Sheer Tint

CeraVe Hydrating Sunscreen SPF 30 Face Sheer Tint
1.3
/ 10
Moisturizing
1.5 Humectancy icon Humectancy
1.1 Occlusivity icon Occlusivity
0.4Anti-wrinkle icon/ 10
Anti-wrinkle
30
SPF icon
SPF
$$$$

Review

Results you may expect from using CeraVe Hydrating Sunscreen SPF 30 Face Sheer Tint:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using CeraVe Hydrating Sunscreen SPF 30 Face Sheer Tint:

  • A bit of moisturizing. It has a moisturizing rating of 1.3 out of 10.
  • Little anti-wrinkle effect: CeraVe Hydrating Sunscreen SPF 30 Face Sheer Tint has an anti-wrinkle rating of 0.4 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.
  • High sun protection for extended outdoor activities and exposure.

How moisturizing is it?

Slightly moisturizing: CeraVe Hydrating Sunscreen SPF 30 Face Sheer Tint has a moisturizing rating of 1.3 out of 10.

Is it more humectant or occlusive? This product has relatively comparable levels of Humectancy and Occlusivity: a low Humectancy of 1.5 out of 10 and a low Occlusivity of 1.1 out of 10.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, CeraVe Hydrating Sunscreen SPF 30 Face Sheer Tint has a minimal anti-wrinkle rating of 0.4 out of 10. It contains one ingredient with proven anti-wrinkle efficacy: Niacinamide (est. ≈0.3%),
 one of the most effective and well-researched anti-wrinkle ingredients.
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, could deliver additional anti-wrinkle efficacy through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Sun protection

CeraVe Hydrating Sunscreen SPF 30 Face Sheer Tint has an SPF of 30 and provides high sun protection. This level of protection is ideal for activities such as spending time at the beach, outdoor sports, or other activities involving prolonged sun exposure. It's important to apply sunscreen generously and reapply every two hours or after swimming or sweating to maintain effectiveness.

Ingredients

Est. % Ingredient Origin Functions
55
10
5.5
4
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:

Ratings

All humectants
1.5
0.3
0.3
0.3
0.3
0.3
Benchmark
10
All occlusives
2.2
1.3
0.3
0.3
0.3
Benchmark
20
Moisturizing rating
1.3
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 1.5 10
1.5
0.3
0.3
0.3
0.3
0.3
Occlusivity All occlusives 2.2 20
1.1
1.3
0.3
0.3
0.3
Moisturizing rating
1.3
Ingredient Est. % Benchmark Humectancy
0.3
0.3
0.3
0.3
0.3
All humectants 1.5 10
1.5
All humectants
1.5
0.3
0.3
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
1.3
0.3
0.3
0.3
All occlusives 2.2 20
1.1
All occlusives
2.2
1.3
0.3
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
6 /10 4 0.3 0.4
Total
0.4
Niacinamide
0.4
Ingredient anti-wrinkle power
6 /10
when present at, %
4
in this formula, est. %
0.3
Anti-wrinkle rating
0.4
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
0.3
0.3
All antioxidants 1.5 3 No
All antioxidants
1.5
Niacinamide
0.3
Sodium Hyaluronate
0.3
p-Anisic Acid
0.3
Tocopherol
0.3
Diethylhexyl Syringylidenemalonate
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
0.3
0.3
0.3
All soothing 1.2 5 No
All soothing
1.2
0.3
0.3
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %55
Function
Origin
The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Zinc Oxide
Est. %10
Function
Origin
A white mineral powder mainly used in skincare as a physical sunscreen. It protects against UVA light that leads to visible signs of aging, including wrinkles and fine lines. Zinc oxide can also be used as a colorant to enhance the whiteness of a product.
Titanium Dioxide (CI 77891)
Est. %5.5
Function
Origin
One of two the most commonly used mineral sunscreens. It can absorb UV light, including UVB – which causes burning, tanning, and even skin cancer. Also used as a colorant, titanium dioxide gives a product a bright white color.
C12-15 Alkyl Benzoate
Est. %4
Function
Origin
A synthetic emollient ester. It works to improve the appearance of the skin by filling in the microcracks on the surface, thereby making the skin appear softer and smoother. It imparts a lightweight, velvety feel.
Isohexadecane
Est. %3
Function
Origin
A clear, colorless liquid that is commonly used as an emollient. It is made up of pure hydrocarbons and leaves a dry feeling on the skin upon application. It also increases the spreadability of a product.
Isononyl Isononanoate
Est. %2.5
Function
Origin
An ester of a branched fatty acid with a branched fatty alcohol. It is an easily spreadable emollient that has a silky, dry, non-greasy feel on the skin.
Dicaprylyl Ether
Est. %2
Function
Origin
A fast-spreading and very lightweight emollient. It is used to reduce the tack and oiliness of oil-based formulas and gives the skin a dry, silky after-feel. It is also a great solvent.
PEG-30 Dipolyhydroxystearate
Est. %1.5
Function
Origin
Description is coming soon
Triethylhexanoin
Est. %1.3
Function
Origin
An occlusive and emollient ester of glycerin and a fatty acid. It is easily spreadable and does not leave a sticky after-feel.
Polyglyceryl-4 Isostearate
Est. %1
Function
Origin
A synthetic emollient emulsifier that helps oil and water phases to mix.
Dicaprylyl Carbonate
Est. %0.3
Function
Origin
A very fast-spreading emollient that gives a product an incredibly lightweight feel. Dicaprylyl carbonate works well as a solvent for suspending insoluble solids such as mineral sunscreens or iron oxide pigments.
Ethylene/Acrylic Acid Copolymer
Est. %0.3
Function
Origin
Description is coming soon
Triethanolamine
Est. %0.3
Function
Origin
A clear, colorless, and highly viscous liquid, this ingredient is an excellent pH adjuster. When it is necessary to neutralize an acidic solution or to generally increase the pH of a product, triethanolamine is a common choice.
Silica
Est. %0.3
Function
Origin
A widely used cosmetic ingredient with the same chemical composition as the sand found on beaches. A common function of silica is its ability to control viscosity. In certain chemical forms, it can effectively thicken cream-style products.
Poly C10-30 Alkyl Acrylate
Est. %0.3
Function
Origin
Description is coming soon
Stearic Acid
Est. %0.3
Function
Origin
A saturated fatty acid found in vegetable butter and animal fats. It is an occlusive moisturizing and emollient ingredient and also helps to maintain the barrier function of the skin.
Ceramide NP
Est. %0.3
Function
Origin
Also known as ceramide 3, it is the most common ceramide in our skin. It helps to restore the skin’s lipid barrier and alleviate the symptoms of dry and cracked skin. Research has shown that skin suffering from conditions such as AD lacks ceramides.
Ceramide AP
Est. %0.3
Function
Origin
Previously called Ceramide 6 II, Ceramide AP is one of the most common ceramides in the skin. Research has shown that dry, flaky skin has significantly less Ceramide AP. Its application helps to treat dry skin by restoring balance in the skin lipids.
Ceramide EOP
Est. %0.3
Function
Origin
Formerly called Ceramide 1, this ingredient is a skin-identical wax-like lipid with an ultra-long fatty acid chain. It restores and stabilizes the skin’s lipid matrix and helps to treat dry and flaky skin, especially when combined with other ceramides.
Carbomer
Est. %0.3
Function
Origin
A synthetic ingredient with the ability to gel water. When used in emulsions, such as lotions and creams, carbomer can also act as an emulsion stabilizer.
Niacinamide
Est. %0.3
Function
Origin

Also known as vitamin B3, this ingredient is a true superstar with confirmed moisturizing, anti-acne, hyperpigmentation, and antioxidant benefits. Two studies confirm its significant anti-wrinkle efficacy.

Cetearyl Alcohol
Est. %0.3
Function
Origin
A blend of cetyl alcohol and stearyl alcohol, the fatty alcohols that are derived from palm oil. It helps to create emulsions that give off a soft and silky emollient feel and also increase product thickness.
Triethoxycaprylylsilane
Est. %0.3
Function
Origin
A binding and coating ingredient that allows pigments like iron oxides and mica to disperse better in oily environments. This leads to more vibrant colors.
Behentrimonium Methosulfate
Est. %0.3
Function
Origin
Description is coming soon
Sodium Chloride
Est. %0.3
Function
Origin
You’re definitely familiar with sodium chloride, even if you don’t think you are. It’s table salt! Salt works well with some cleansing ingredients (surfactants) to thicken them into gels. It also acts as a stabilizer for water-in-oil emulsions.
Salicylic Acid
Est. %0.3
Function
Origin
This effective peeling and anti-inflammatory BHA is used as an anti-acne agent and works by breaking down the junctions between dead skin cells. This results in the peeling of dead skin and the unclogging of pores.
Sodium Hyaluronate
Est. %0.3
Function
Origin
A sodium salt of famous hyaluronic acid. A potent humectant that hydrates the skin, supports collagen function, and fills out small wrinkles. Sodium hyaluronate also offers soothing and antioxidant properties.
Sodium Lauroyl Lactylate
Est. %0.3
Function
Origin
A multifunctional ingredient that produces foamy cleansers and allows oil and water to mix.
Cholesterol
Est. %0.3
Function
Origin
An emollient and important barrier repairing lipid, effective when combined with fatty acids and ceramides. Around 25% of the skin’s lipid layer is made up of cholesterol and it is found in the membrane of every single cell in our body.
Aluminum Stearate
Est. %0.3
Function
Origin
A water-resistant thickener and common ingredient in makeup to help coat the colors used.
Alumina
Est. %0.3
Function
Origin
A mineral derived from the metal ore known as aluminum. It is commonly used as an abrasive and also acts as a thickening viscosity controlling agent (and thus as a bulking agent). Alumina is also a great opacifier.
Aluminum Hydroxide
Est. %0.3
Function
Origin
A white mineral powder, also known as alumina, that is derived from aluminum metal. It is frequently used as an abrasive in exfoliating products and as a thickener. Aluminum oxide is also a great opacifier.
Iron Oxides
Est. %0.3
Function
Origin
Mineral pigments used to provide color in skincare products. These naturally occurring pigments are available in yellow, red, brown, and black powders.
Phenoxyethanol
Est. %0.3
Function
Origin
The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
p-Anisic Acid
Est. %0.3
Function
Origin
A simple phenolic acid with antioxidant and antimicrobial properties that is used as a preservative. It has a faint, sweet aroma and can be found in anise, fennel, and cocoa seeds.
Chlorphenesin
Est. %0.3
Function
Origin
A preservative and broad-spectrum antimicrobial agent that protects products from a wide range of bacteria and fungi.
Tocopherol
Est. %0.3
Function
Origin
Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.
Disodium EDTA
Est. %0.3
Function
Origin
A synthetic chelator that helps to maintain the look and smell of a product by 'locking up' troublesome metal ions.
Disodium Stearoyl Glutamate
Est. %0.3
Function
Origin
An emulsifier that can provide a light feel, especially when used in color cosmetics to coat pigments. It is not expected to be irritating when used at recommended levels.
Propylene Carbonate
Est. %0.3
Function
Origin
A derivative of propylene glycol that is used most frequently as a solvent. Additionally, propylene carbonate serves as a viscosity controlling agent reducing the thickness of the products it is added to.
Citric Acid
Est. %0.3
Function
Origin
A gently exfoliating AHA that helps to remove the top layer of dead skin cells. In comparison to other AHAs, citric acid has been shown to be one of the least effective. It is also very commonly used as a stabilizing and pH-controlling agent.
Caprylyl Glycol
Est. %0.3
Function
Origin
An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Capryloyl Salicylic Acid
Est. %0.3
Function
Origin
A derivative of salicylic acid, with bigger and more lipid-soluble molecules. This makes it more powerful and safer than salicylic acid. It is used as an exfoliating and peeling agent.
Caprylic/Capric Triglyceride
Est. %0.3
Function
Origin
A natural occlusive moisturizing and emollient ingredient, it is a blend of glycerin and two fatty acids, caprylic and capric acid. It creates an oil-based protective layer on the skin, thereby preventing water loss.
Diethylhexyl Syringylidenemalonate
Est. %0.3
Function
Origin
Description is coming soon
Disteardimonium Hectorite
Est. %0.3
Function
Origin
A clay ingredient that functions primarily as a viscosity controlling agent that thickens all types of formulas. Disteardimonium hectorite imparts a smooth, velvety feel, making it a luxurious addition to any formula.
Xanthan Gum
Est. %0.3
Function
Origin
A natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.
Phytosphingosine
Est. %0.3
Function
Origin
A key component of ceramides NP, AP, and EOP. It has barrier repair properties and stimulates the production of the skin’s Natural Moisturizing Factor. Phytosphingosine has strong antimicrobial and anti-inflammatory activity, which can be used to treat acne.
Polyhydroxystearic Acid
Est. %0.3
Function
Origin
A soft and malleable amber wax naturally derived from vegetable sources. It allows minerals to be very finely dispersed, which can improve SPF, decrease the white cast in sunscreens, and increase the color expression in pigmented products.
Ethylhexylglycerin
Est. %0.3
Function
Origin
A preservative booster derived from glycerin. It is commonly paired with other preservatives to improve their efficacy. Ethylhexylglycerin is also a humectant due to its chemical base of glycerin.