The Saem Cover Perfection Concealer Cushion Review

The Saem Cover Perfection Concealer Cushion
1.8
/ 10
Moisturizing
3.1 Humectancy icon Humectancy
0.4 Occlusivity icon Occlusivity
0.4Anti-wrinkle icon/ 10
Anti-wrinkle
Review

Does The Saem Cover Perfection Concealer Cushion Work?

 
According to CreamScan AI's analysis of the ingredient list, here’s what The Saem Cover Perfection Concealer Cushion has to offer:
 
  • A bit of moisturizing. It has a moisturizing rating of 1.8 out of 10.
  • Slight anti-wrinkle effect: The Saem Cover Perfection Concealer Cushion has an anti-wrinkle rating of 0.4 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.

Key Benefits of The Saem Cover Perfection Concealer Cushion

 
These are the key benefits you can expect from using The Saem Cover Perfection Concealer Cushion:
 

Slight Moisturizing When Used Alone

According to CreamScan analysis, The Saem Cover Perfection Concealer Cushion is slightly moisturizing, with a moisturizing rating of 1.8 out of 10.

Is it more humectant or occlusive? Rather humectant. It has a low occlusivity of 0.4 out of 10 and a moderate humectancy of 3.1 out of 10, primarily due to the high content of Butylene Glycol (est. ≈2.5%).

This type of product provides relatively light moisturizing on its own but can contribute to overall moisturizing efficacy when used as part of a skincare routine, alongside another moisturizer.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Slight Anti-Wrinkle Efficacy

According to CreamScan analysis, The Saem Cover Perfection Concealer Cushion has a slight anti-wrinkle rating of 0.4 out of 10.

It contains one ingredient with proven anti-wrinkle efficacy: Niacinamide (est. ≈0.3%), 
 one of the most effective and well-researched anti-wrinkle ingredients. A clinical study involving 30 participants (Kawada et al.) confirmed that a cream with 4% niacinamide reduced the average depth of wrinkles around the eyes by 9% after 8 weeks of use, compared to a vehicle (the same formulation without niacinamide).
 
Among others, The Saem Cover Perfection Concealer Cushion also contains Adenosine, an ingredient often marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Adenosine provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not contribute to the anti-wrinkle rating.
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, can deliver some anti-wrinkle effects through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Please note that this is not a complete list of benefits. We are in the process of enhancing our AI model to incorporate anti-pigmentation, exfoliation and anti-acne ratings.

Things to Be Aware Of: The Saem Cover Perfection Concealer Cushion

 
CreamScan AI identified a few things to consider before adding The Saem Cover Perfection Concealer Cushion to your skincare routine:
 

As a Standalone Moisturizer, It Has Relatively Low Moisturizing Potential

If you use The Saem Cover Perfection Concealer Cushion for moisturizing purposes, please keep in mind that it provides relatively light moisturizing on its own, and, more importantly, it’s not optimal for any skin type.

On one hand, it has low occlusivity, which suits oily and combination skin. On the other hand, it has a low estimated concentration of humectants, which are essential for effective moisturizing of all skin types, including oily skin.

Therefore, if used as a standalone moisturizer, this product should be paired with a humectant-rich moisturizer for optimal skin hydration.

Pros & Cons of The Saem Cover Perfection Concealer Cushion

 
Here’s an overview of the pros and cons of The Saem Cover Perfection Concealer Cushion to help you decide if it’s the right choice for your skincare routine:
 

Pros:

  • Provides relatively light moisturizing on its own but can contribute to the moisturizing efficacy of any skincare routine
  • Provides slight anti-wrinkle efficacy

Cons: 

  • Minimal moisturizing efficacy, even for oily skin - something to keep in mind if this is the only moisturizer in your routine.

Ingredients

Est. % Ingredient Origin Functions
60
9
6
4
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Water
Function:
Origin:
Titanium Dioxide (CI 77891)
Function:
Origin:
Homosalate
Function:
Origin:
Cyclopentasiloxane
Function:
Origin:
Zinc Oxide
Function:
Origin:
Butylene Glycol
Function:
Origin:
Methyl Trimethicone
Function:
Origin:
Butyloctyl Salicylate
Function:
Origin:
Octisalate
Function:
Origin:
Lauryl PEG-10 Tris(Trimethylsiloxy)silylethyl Dimethicone
Function:
Origin:
Isododecane
Function:
Origin:
Niacinamide
Function:
Origin:
PEG-10 Dimethicone
Function:
Origin:
Mica
Function:
Origin:
Magnesium Sulfate
Function:
Origin:
Trimethylsiloxysilicate
Function:
Origin:
Methyl Methacrylate Crosspolymer
Function:
Origin:
Disteardimonium Hectorite
Function:
Origin:
Acrylates/Stearyl Acrylate/Dimethicone Methacrylate Copolymer
Function:
Origin:
Caprylic/Capric Glycerides
Function:
Origin:
PVP
Function:
Origin:
Butyl Acrylate
Function:
Origin:
Triethoxycaprylylsilane
Function:
Origin:
Aluminum Hydroxide
Function:
Origin:
Cetyl Alcohol
Function:
Origin:
Fragrance
Function:
Origin:
Adenosine
Function:
Origin:
Dimethicone
Function:
Origin:
1,2-Hexanediol
Function:
Origin:
Tocopherol
Function:
Origin:
Citrus Limon (Lemon) Fruit Extract
Function:
Origin:
Akebia Quinata Extract
Function:
Origin:
Citrus Aurantium Dulcis (Orange) Fruit Extract
Function:
Origin:
Iron Oxides (CI 77492)
Function:
Origin:
Iron Oxides (CI 77499)
Function:
Origin:

Ratings

All humectants
3.1
2.5
0.3
0.3
Benchmark
10
All occlusives
0.9
0.3
0.3
0.3
Benchmark
20
Moisturizing rating
1.8
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 3.1 10
3.1
2.5
0.3
0.3
Occlusivity All occlusives 0.9 20
0.4
0.3
0.3
0.3
Moisturizing rating
1.8
Ingredient Est. % Benchmark Humectancy
2.5
0.3
0.3
All humectants 3.1 10
3.1
All humectants
3.1
2.5
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
0.3
0.3
0.3
All occlusives 0.9 20
0.4
All occlusives
0.9
0.3
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
6 /10 4 0.3 0.4
n/a
- 0.3 -
Total
0.4
Niacinamide
0.4
Ingredient anti-wrinkle power
6 /10
when present at, %
4
in this formula, est. %
0.3
Adenosine
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
0.4
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
All antioxidants 0.9 3 No
All antioxidants
0.9
Niacinamide
0.3
Tocopherol
0.3
Citrus Aurantium Dulcis (Orange) Fruit Extract
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
All soothing 0.3 5 No
All soothing
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %60
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Titanium Dioxide (CI 77891)
Est. %9
Function
Origin
Titanium Dioxide (CI 77891)One of two the most commonly used mineral sunscreens. It can absorb UV light, including UVB – which causes burning, tanning, and even skin cancer. Also used as a colorant, titanium dioxide gives a product a bright white color.
Homosalate
Est. %6
Function
Origin
HomosalateA synthetic chemical UV filter that protects against harmful UVB radiation.
Cyclopentasiloxane
Est. %4
Function
Origin
CyclopentasiloxaneA lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in.
Zinc Oxide
Est. %3
Function
Origin
Zinc OxideA white mineral powder mainly used in skincare as a physical sunscreen. It protects against UVA light that leads to visible signs of aging, including wrinkles and fine lines. Zinc oxide can also be used as a colorant to enhance the whiteness of a product.
Butylene Glycol
Est. %2.5
Function
Origin
Butylene Glycol

A clear, colorless liquid humectant that draws moisture to the skin. The humectancy of butylene glycol, owed to its two hydroxyl groups, is quite considerable, although not as powerful as glycerin, which contains three hydroxyl groups.

Methyl Trimethicone
Est. %2
Function
Origin
Methyl TrimethiconeA lightweight and volatile silicone known for its excellent solvency. This silicone has a silky, cushiony feel with excellent lubricity and is commonly used as an emollient in silicone-based skincare products.
Butyloctyl Salicylate
Est. %1.5
Function
Origin
Butyloctyl SalicylateA synthetic emollient and solvent. It is primarily used as a carrier oil to disperse minerals in, including pigments and sunscreen minerals. It can also absorb UV light, thus boosting the SPF of sunscreen products.
Octisalate
Est. %1.3
Function
Origin
OctisalateA UVB sunscreen also known as ethylhexyl salicylate. It is normally paired with UVA sunscreens to provide broad-spectrum protection. Octisalate also protects other ingredients, like colorants and antioxidants, from deterioration due to exposure to UV light.
Lauryl PEG-10 Tris(Trimethylsiloxy)silylethyl Dimethicone
Est. %1
Function
Origin
Lauryl PEG-10 Tris(Trimethylsiloxy)silylethyl Dimethicone
Isododecane
Est. %0.3
Function
Origin
IsododecaneAn emollient derived from petroleum with high spreadability. It is often used as a replacement for oils and silicones because it leaves no residue behind on the skin. When a product is labeled as “oil-free” it may contain isododecane instead of heavier oils.
Niacinamide
Est. %0.3
Function
Origin
Niacinamide

Also known as vitamin B3, this ingredient is a true superstar with confirmed moisturizing, anti-acne, hyperpigmentation, and antioxidant benefits. Two studies confirm its significant anti-wrinkle efficacy.

PEG-10 Dimethicone
Est. %0.3
Function
Origin
PEG-10 DimethiconeA polyethylene-based emulsifying ingredient. It has a water-loving portion and an oil-loving portion that help to keep the water and oil phases connected to form an emulsion.
Mica
Est. %0.3
Function
Origin
MicaA mineral powder made up of silicates with several functions (the main one being as a colorant). It has a shimmery appearance, making it highly desirable in certain cosmetic products. Mica also helps the product to apply more smoothly.
Magnesium Sulfate
Est. %0.3
Function
Origin
Magnesium SulfateA naturally occurring mineral that is commonly used in skincare products as a bulking agent. It helps to control the viscosity of products by making them thicker.
Trimethylsiloxysilicate
Est. %0.3
Function
Origin
TrimethylsiloxysilicateAn occlusive moisturizing and emollient silicone resin that smoothes and softens the appearance of the skin. It also protects a product from rinsing away too easily with water, sweat, or friction.
Methyl Methacrylate Crosspolymer
Est. %0.3
Function
Origin
Methyl Methacrylate CrosspolymerA synthetic ingredient that is used for bulking, film-forming, and controlling viscosity. It can absorb large amounts of water and oil and creates a network for other ingredients to live in.
Disteardimonium Hectorite
Est. %0.3
Function
Origin
Disteardimonium HectoriteA clay ingredient that functions primarily as a viscosity controlling agent that thickens all types of formulas. Disteardimonium hectorite imparts a smooth, velvety feel, making it a luxurious addition to any formula.
Acrylates/Stearyl Acrylate/Dimethicone Methacrylate Copolymer
Est. %0.3
Function
Origin
Acrylates/Stearyl Acrylate/Dimethicone Methacrylate Copolymer
Caprylic/Capric Glycerides
Est. %0.3
Function
Origin
Caprylic/Capric Glycerides
PVP
Est. %0.3
Function
Origin
PVPAn excellent film-former used in hairsprays, peel-off masks, and even some self-tanning products. These films are strong and hold onto the skin.
Butyl Acrylate
Est. %0.3
Function
Origin
Butyl Acrylate
Triethoxycaprylylsilane
Est. %0.3
Function
Origin
TriethoxycaprylylsilaneA binding and coating ingredient that allows pigments like iron oxides and mica to disperse better in oily environments. This leads to more vibrant colors.
Aluminum Hydroxide
Est. %0.3
Function
Origin
Aluminum HydroxideA white mineral powder, also known as alumina, that is derived from aluminum metal. It is frequently used as an abrasive in exfoliating products and as a thickener. Aluminum oxide is also a great opacifier.
Cetyl Alcohol
Est. %0.3
Function
Origin
Cetyl AlcoholA waxy solid fatty alcohol derived from palm oil. It is most commonly used as a co-emulsifier and affects the final aesthetic of the product, leaving a soft and silky feeling on the skin. Cetyl alcohol is also used as a viscosity controlling agent.
Fragrance
Est. %0.3
Function
Origin
FragranceUnder trade secret law, manufacturers have the right not to disclose what exactly went into the fragrance and use the unspecific word Fragrance or Parfum instead. Many fragrances are highly allergenic.
Adenosine
Est. %0.3
Function
Origin
Adenosine

A key molecule responsible for energy transportation, signaling, and enzyme activity. Adenosine is a popular anti-wrinkle ingredient, however, the key study about its anti-wrinkle efficacy (1) does not meet CreamScan Research Evaluation Standards as it is not double-blind.

Dimethicone
Est. %0.3
Function
Origin
DimethiconeThe most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
1,2-Hexanediol
Est. %0.3
Function
Origin
1,2-HexanediolA multi-functional formula helper. It is a well-studied preservtive against bacteria and can help pigments and fragrances disperse evenly in a formula.
Tocopherol
Est. %0.3
Function
Origin
Tocopherol

Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.

Citrus Limon (Lemon) Fruit Extract
Est. %0.3
Function
Origin
Citrus Limon (Lemon) Fruit Extract

A fragrant extract from lemon peels that contains various antioxidant flavonoids, organic acids, and limonoids – which are currently under investigation as potential anti-wrinkle and anti-pigment compounds.

Akebia Quinata Extract
Est. %0.3
Function
Origin
Akebia Quinata Extract
Citrus Aurantium Dulcis (Orange) Fruit Extract
Est. %0.3
Function
Origin
Citrus Aurantium Dulcis (Orange) Fruit Extract

An extract from the fruit of the sweet orange. It contains fragrant sweet orange essential oil, high amounts of antioxidant flavonoids (mainly hesperidin), and carotenoids – which give it the orange color.

Iron Oxides (CI 77492)
Est. %0.3
Function
Origin
Iron Oxides (CI 77492)Also known as iron (III) oxide, this ingredient is a yellow-colored pigment that can either be derived from minerals or produced synthetically. It adds yellow tones to cosmetic products.
Iron Oxides (CI 77499)
Est. %0.3
Function
Origin
Iron Oxides (CI 77499)A black colorant also known as black iron oxide used in a wide range of skincare products.