Libbs Filtrum Ultra Seco Protetor Solar SPF 30

Libbs Filtrum Ultra Seco Protetor Solar SPF 30
5.1
/ 10
Moisturizing
9.9 Humectancy icon Humectancy
0.3 Occlusivity icon Occlusivity
0.4Anti-wrinkle icon/ 10
Anti-wrinkle
30
SPF icon
SPF

Review

Results you may expect from using Libbs Filtrum Ultra Seco Protetor Solar SPF 30:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Libbs Filtrum Ultra Seco Protetor Solar SPF 30:

  • Moderate moisturizing. It has a moisturizing rating of 5.1 out of 10.
  • Little anti-wrinkle effect: Libbs Filtrum Ultra Seco Protetor Solar SPF 30 has an anti-wrinkle rating of 0.4 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.
  • High sun protection for extended outdoor activities and exposure.

How moisturizing is it?

Quite moisturizing: Libbs Filtrum Ultra Seco Protetor Solar SPF 30 has a moisturizing rating of 5.1 out of 10.

Is it more humectant or occlusive? Significantly more humectant. It has a low occlusivity of 0.3 out of 10 and a very high humectancy of 9.9 out of 10, primarily due to the high content of Propylene Glycol (est. ≈9.0%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, Libbs Filtrum Ultra Seco Protetor Solar SPF 30 has a minimal anti-wrinkle rating of 0.4 out of 10. It contains one ingredient with proven anti-wrinkle efficacy: Niacinamide (est. ≈0.3%),
 one of the most effective and well-researched anti-wrinkle ingredients.
 
Among others, Libbs Filtrum Ultra Seco Protetor Solar SPF 30 also contains Retinyl Palmitate, an ingredient marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Retinyl Palmitate provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not contribute to the anti-wrinkle rating.
 
Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, could deliver additional anti-wrinkle efficacy through its moisturizing action.
 

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Sun protection

Libbs Filtrum Ultra Seco Protetor Solar SPF 30 has an SPF of 30 and provides high sun protection. This level of protection is ideal for activities such as spending time at the beach, outdoor sports, or other activities involving prolonged sun exposure. It's important to apply sunscreen generously and reapply every two hours or after swimming or sweating to maintain effectiveness.

Ingredients

Est. % Ingredient Origin Functions
65
Water
9
Propylene Glycol
6
Dicaprylyl Carbonate
4
Cyclopentasiloxane
3
Dimethicone Crosspolymer
2.5
Steareth-2
2
Ceteareth-12
1.5
Octinoxate
1.3
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
1
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
0.3
Ceteareth-20
0.3
Distearyl Ether
0.3
Phenoxyethanol
0.3
Retinyl Palmitate
0.3
Caprylhydroxamic Acid
0.3
Hydrogenated Lecithin
0.3
Butylene Glycol Dicaprylate/Dicaprate
0.3
Methyl Methacrylate Crosspolymer
0.3
Aluminum Starch Octenylsuccinate
0.3
Tocopheryl Acetate
0.3
Darutoside
0.3
Oridonin
0.3
Xanthan Gum
0.3
Disodium EDTA
0.3
Diethylamino Hydroxybenzoyl Hexyl Benzoate
0.3
Niacinamide
0.3
Sodium Stearoyl Glutamate
0.3
Cetyl Alcohol
0.3
Ammonium Acryloyldimethyltaurate/VP Copolymer
0.3
Stearyl Alcohol
0.3
Caprylyl Glycol
0.3
Glycerin
Est. %
Water
Function:
Origin:
Propylene Glycol
Function:
Origin:
Dicaprylyl Carbonate
Function:
Origin:
Cyclopentasiloxane
Function:
Origin:
Dimethicone Crosspolymer
Function:
Origin:
Steareth-2
Function:
Origin:
Ceteareth-12
Function:
Origin:
Octinoxate
Function:
Origin:
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Function:
Origin:
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
Function:
Origin:
Ceteareth-20
Function:
Origin:
Distearyl Ether
Function:
Origin:
Phenoxyethanol
Function:
Origin:
Retinyl Palmitate
Function:
Origin:
Caprylhydroxamic Acid
Function:
Origin:
Hydrogenated Lecithin
Function:
Origin:
Butylene Glycol Dicaprylate/Dicaprate
Function:
Origin:
Methyl Methacrylate Crosspolymer
Function:
Origin:
Aluminum Starch Octenylsuccinate
Function:
Origin:
Tocopheryl Acetate
Function:
Origin:
Darutoside
Function:
Origin:
Oridonin
Function:
Origin:
Xanthan Gum
Function:
Origin:
Disodium EDTA
Function:
Origin:
Diethylamino Hydroxybenzoyl Hexyl Benzoate
Function:
Origin:
Niacinamide
Function:
Origin:
Sodium Stearoyl Glutamate
Function:
Origin:
Cetyl Alcohol
Function:
Origin:
Ammonium Acryloyldimethyltaurate/VP Copolymer
Function:
Origin:
Stearyl Alcohol
Function:
Origin:
Caprylyl Glycol
Function:
Origin:
Glycerin
Function:
Origin:

Ratings

All humectants
9.9
9
0.3
0.3
0.3
Benchmark
10
All occlusives
0.6
0.3
0.3
Benchmark
20
Moisturizing rating
5.1
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 9.9 10
9.9
9
0.3
0.3
0.3
Occlusivity All occlusives 0.6 20
0.3
0.3
0.3
Moisturizing rating
5.1
Ingredient Est. % Benchmark Humectancy
9
0.3
0.3
0.3
All humectants 9.9 10
9.9
All humectants
9.9
9
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
0.3
0.3
All occlusives 0.6 20
0.3
All occlusives
0.6
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
6 /10 4 0.3 0.4
n/a
- 0.3 -
Total
0.4
Niacinamide
0.4
Ingredient anti-wrinkle power
6 /10
when present at, %
4
in this formula, est. %
0.3
Retinyl Palmitate
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
0.4
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
All antioxidants 0.6 3 No
All antioxidants
0.6
Niacinamide
0.3
Tocopheryl Acetate
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
0.3
All soothing 0.3 5 No
All soothing
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %65
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Propylene Glycol
Est. %9
Function
Origin
Propylene GlycolA clear, thick, odorless liquid of synthetic origin. Its main function is to stabilize cosmetic products exposed to varying temperatures. It is also a moderately strong humectant with similar properties to glycerin.
Dicaprylyl Carbonate
Est. %6
Function
Origin
Dicaprylyl CarbonateA very fast-spreading emollient that gives a product an incredibly lightweight feel. Dicaprylyl carbonate works well as a solvent for suspending insoluble solids such as mineral sunscreens or iron oxide pigments.
Cyclopentasiloxane
Est. %4
Function
Origin
CyclopentasiloxaneA lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in.
Dimethicone Crosspolymer
Est. %3
Function
Origin
Dimethicone CrosspolymerA group of ingredients that are typically added to skincare products to adjust the formula. Dimethicone Crosspolymers stabilize a formula, regulate its thickness and consistency and give the product a velvety feel.
Steareth-2
Est. %2.5
Function
Origin
Steareth-2A waxy, naturally derived or synthetic emulsifier that can handle extreme formula conditions such as a low pH. It offers emulsifying properties to a formula by helping oils and water to mix.
Ceteareth-12
Est. %2
Function
Origin
Ceteareth-12A waxy emulsifier that can build stable emulsions.
Octinoxate
Est. %1.5
Function
Origin
OctinoxateA chemical sunscreen also known as ethylhexyl methoxycinnamate. It protects against UVB, which causes the skin to burn and tan and can lead to certain types of skin cancers. For broad-spectrum protection claims, octinoxate should be paired with a UVA sunscreen.
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Est. %1.3
Function
Origin
Bis-Ethylhexyloxyphenol Methoxyphenyl TriazineA synthetic "chemical" sunscreen ingredient that protects against UV damage and offers better stability and safety compared to some other traditional organic suncreen ingredients.
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
Est. %1
Function
Origin
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
Ceteareth-20
Est. %0.3
Function
Origin
Ceteareth-20A fatty alcohol emulsifier that helps to mix oil and water together, best for oil-in-water emulsions. It is also a cleansing agent. When combined with cetearyl alcohol, ceteareth-20 forms a mix that, according to acne.org, can be comedogenic.
Distearyl Ether
Est. %0.3
Function
Origin
Distearyl Ether
Phenoxyethanol
Est. %0.3
Function
Origin
PhenoxyethanolThe most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Retinyl Palmitate
Est. %0.3
Function
Origin
Retinyl PalmitateAn esterified form of retinol – it combines retinol and palmitic acid into one molecule. Retinyl palmitate is less irritating than retinol but also much less effective in its anti-aging and acne-reducing effects.
Caprylhydroxamic Acid
Est. %0.3
Function
Origin
Caprylhydroxamic AcidA chelating agent used alongside preservatives in order to boost their antimicrobial activity.
Hydrogenated Lecithin
Est. %0.3
Function
Origin
Hydrogenated LecithinA version of plain lecithin that has been saturated with hydrogen atoms. This ingredient can be derived from plants, like soy or sunflower, from egg yolks, or made synthetically. Its major function is to emulsify water and oils.
Butylene Glycol Dicaprylate/Dicaprate
Est. %0.3
Function
Origin
Butylene Glycol Dicaprylate/Dicaprate

Description is coming soon

Methyl Methacrylate Crosspolymer
Est. %0.3
Function
Origin
Methyl Methacrylate CrosspolymerA synthetic ingredient that is used for bulking, film-forming, and controlling viscosity. It can absorb large amounts of water and oil and creates a network for other ingredients to live in.
Aluminum Starch Octenylsuccinate
Est. %0.3
Function
Origin
Aluminum Starch OctenylsuccinateAn absorbent that takes in oils from the skin to reduce the oily sheen. It can also absorb oils from the skincare product itself, resulting in a softer, less greasy product, normally with better spreadability and less tack.
Tocopheryl Acetate
Est. %0.3
Function
Origin
Tocopheryl Acetate

An antioxidant derivative of tocopherol (vitamin E). It helps to protect cells from free radicals and UV damage through the conversion to active vitamin E in the skin. It is more stable than tocopherol.

Darutoside
Est. %0.3
Function
Origin
Darutoside
Oridonin
Est. %0.3
Function
Origin
Oridonin
Xanthan Gum
Est. %0.3
Function
Origin
Xanthan GumA natural multi-functional ingredient that originates from fermented sugars. Xanthan gum acts as a viscosity-building agent to thicken skincare products. It is also an excellent stabilizer and works well to hold other ingredients together.
Disodium EDTA
Est. %0.3
Function
Origin
Disodium EDTAA synthetic chelator that helps to maintain the look and smell of a product by 'locking up' troublesome metal ions.
Diethylamino Hydroxybenzoyl Hexyl Benzoate
Est. %0.3
Function
Origin
Diethylamino Hydroxybenzoyl Hexyl Benzoate
Niacinamide
Est. %0.3
Function
Origin
Niacinamide

Also known as vitamin B3, this ingredient is a true superstar with confirmed moisturizing, anti-acne, hyperpigmentation, and antioxidant benefits. Two studies confirm its significant anti-wrinkle efficacy.

Sodium Stearoyl Glutamate
Est. %0.3
Function
Origin
Sodium Stearoyl GlutamateA useful ingredient for both cleansing and emulsifying purposes. It is a powerful agent for washing away dirt and oils from the skin.
Cetyl Alcohol
Est. %0.3
Function
Origin
Cetyl AlcoholA waxy solid fatty alcohol derived from palm oil. It is most commonly used as a co-emulsifier and affects the final aesthetic of the product, leaving a soft and silky feeling on the skin. Cetyl alcohol is also used as a viscosity controlling agent.
Ammonium Acryloyldimethyltaurate/VP Copolymer
Est. %0.3
Function
Origin
Ammonium Acryloyldimethyltaurate/VP CopolymerA polymeric ingredient that creates lightweight and refreshing gel textures. It also works as a viscosity controlling agent.
Stearyl Alcohol
Est. %0.3
Function
Origin
Stearyl AlcoholA natural fatty alcohol that thickens, stabilizes, and keeps emulsions a bright white color. It has many uses, the main one being as an emulsifier. It also acts as an opacifying agent and emollient.
Caprylyl Glycol
Est. %0.3
Function
Origin
Caprylyl GlycolAn emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.
Glycerin
Est. %0.3
Function
Origin
Glycerin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.