Joy Beautiful By Nature Revivify Hello Sun Physical Sunscreen SPF 50+ PA++++

Joy Beautiful By Nature Revivify Hello Sun Physical Sunscreen SPF 50+ PA++++
1.4
/ 10
Moisturizing
1.9 Humectancy icon Humectancy
0.9 Occlusivity icon Occlusivity
50
SPF icon
SPF

Review

Does Joy Beautiful By Nature Revivify Hello Sun Physical Sunscreen SPF 50+ PA++++ work?

Based on the ingredient list analysis by CreamScan AI, these are the key benefits you can expect from using Joy Beautiful By Nature Revivify Hello Sun Physical Sunscreen SPF 50+ PA++++:

  • A bit of moisturizing. It has a moisturizing rating of 1.4 out of 10.
  • Very high sun protection for prolonged sun exposure, such as spending the day at the beach, hiking, or outdoor sports.

Slight Moisturizing When Used Alone

According to CreamScan analysis, Joy Beautiful By Nature Revivify Hello Sun Physical Sunscreen SPF 50+ PA++++ is slightly moisturizing, with a moisturizing rating of 1.4 out of 10.

Is it more humectant or occlusive? This product has relatively comparable levels of Humectancy and Occlusivity: a low Humectancy of 1.9 out of 10 and a low Occlusivity of 0.9 out of 10.

This type of product provides relatively light moisturizing on its own but can contribute to overall moisturizing efficacy when used as part of a skincare routine, alongside another moisturizer.

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Very high sun protection for prolonged sun exposure, all skin types, and high-risk conditions

With an SPF of 50, Joy Beautiful By Nature Revivify Hello Sun Physical Sunscreen SPF 50+ PA++++ provides very high sun protection, suitable for intense sun exposure in tropical climates, beach vacations, or high-altitude environments.

This level of SPF blocks 98% or more of UVB rays, offering the highest level of defense against sunburn. Broad-spectrum formulations also provide strong protection against UVA rays, which are responsible for skin aging, pigmentation, and DNA damage.

For optimal protection, choose products labeled broad-spectrum to ensure defense against both UVA rays, which contribute to skin aging and pigmentation, and UVB rays that cause sunburn.

This level of SPF is ideal for all skin types, particularly fair, sensitive, or post-treatment skin (e.g., after laser or chemical procedures). It is also highly recommended for individuals at greater risk of skin cancer.

For extended outdoor activities or water exposure, choose a water-resistant formula and reapply every two hours for maximum effectiveness.

Ingredients

Est. % Ingredient Origin Functions
65
9
6
4
3
2.5
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Water
Function:
Origin:
Cyclopentasiloxane
Function:
Origin:
Dimethicone Crosspolymer
Function:
Origin:
Zinc Oxide
Function:
Origin:
C12-15 Alkyl Benzoate
Function:
Origin:
Isostearic Acid
Function:
Origin:
Polyhydroxystearic Acid
Function:
Origin:
Caprylyl Methicone
Function:
Origin:
Glycerin
Function:
Origin:
Titanium Dioxide (CI 77891)
Function:
Origin:
Silica
Function:
Origin:
Dimethicone
Function:
Origin:
PPG-10 Cetyl Ether
Function:
Origin:
Aluminum Starch Octenylsuccinate
Function:
Origin:
TEA-Dextrin Octenylsuccinate
Function:
Origin:
Sodium Chloride
Function:
Origin:
Disteardimonium Hectorite
Function:
Origin:
Magnesium Sulfate
Function:
Origin:
Phenoxyethanol
Function:
Origin:
Ethylhexylglycerin
Function:
Origin:
Octenidine HCl
Function:
Origin:
Fragrance
Function:
Origin:

Ratings

All humectants
1.9
1.3
0.3
0.3
Benchmark
10
All occlusives
1.8
1.5
0.3
Benchmark
20
Moisturizing rating
1.4
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 1.9 10
1.9
1.3
0.3
0.3
Occlusivity All occlusives 1.8 20
0.9
1.5
0.3
Moisturizing rating
1.4
Ingredient Est. % Benchmark Humectancy
1.3
0.3
0.3
All humectants 1.9 10
1.9
All humectants
1.9
1.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
1.5
0.3
All occlusives 1.8 20
0.9
All occlusives
1.8
1.5
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
None
Total
0
None
Anti-wrinkle rating
0
Ingredient Est. % Benchmark
Rich in Antioxidants
None
All antioxidants 0 3 No
All antioxidants
0
None
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
None
All soothing 0 5 No
All soothing
0
None
Benchmark
5

Ingredients explained

Water
Est. %65
Function
Origin
WaterThe most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Cyclopentasiloxane
Est. %9
Function
Origin
CyclopentasiloxaneA lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in.
Dimethicone Crosspolymer
Est. %6
Function
Origin
Dimethicone CrosspolymerA group of ingredients that are typically added to skincare products to adjust the formula. Dimethicone Crosspolymers stabilize a formula, regulate its thickness and consistency and give the product a velvety feel.
Zinc Oxide
Est. %4
Function
Origin
Zinc OxideA white mineral powder mainly used in skincare as a physical sunscreen. It protects against UVA light that leads to visible signs of aging, including wrinkles and fine lines. Zinc oxide can also be used as a colorant to enhance the whiteness of a product.
C12-15 Alkyl Benzoate
Est. %3
Function
Origin
C12-15 Alkyl BenzoateA synthetic emollient ester. It works to improve the appearance of the skin by filling in the microcracks on the surface, thereby making the skin appear softer and smoother. It imparts a lightweight, velvety feel.
Isostearic Acid
Est. %2.5
Function
Origin
Isostearic AcidA saturated fatty acid used to mix oil and water and to remove dirt from the skin's surface. Isostearic acid is listed among common comedogenic ingredients by acne.org.
Polyhydroxystearic Acid
Est. %2
Function
Origin
Polyhydroxystearic AcidA soft and malleable amber wax naturally derived from vegetable sources. It allows minerals to be very finely dispersed, which can improve SPF, decrease the white cast in sunscreens, and increase the color expression in pigmented products.
Caprylyl Methicone
Est. %1.5
Function
Origin
Caprylyl MethiconeA liquid silicone with occlusive moisturizing properties. Being compatible with natural oils is a challenge for most silicones, but caprylyl methicone plays well with all types of oils.
Glycerin
Est. %1.3
Function
Origin
Glycerin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Titanium Dioxide (CI 77891)
Est. %1
Function
Origin
Titanium Dioxide (CI 77891)One of two the most commonly used mineral sunscreens. It can absorb UV light, including UVB – which causes burning, tanning, and even skin cancer. Also used as a colorant, titanium dioxide gives a product a bright white color.
Silica
Est. %0.3
Function
Origin
SilicaA widely used cosmetic ingredient with the same chemical composition as the sand found on beaches. A common function of silica is its ability to control viscosity. In certain chemical forms, it can effectively thicken cream-style products.
Dimethicone
Est. %0.3
Function
Origin
DimethiconeThe most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.
PPG-10 Cetyl Ether
Est. %0.3
Function
Origin
PPG-10 Cetyl Ether
Aluminum Starch Octenylsuccinate
Est. %0.3
Function
Origin
Aluminum Starch OctenylsuccinateAn absorbent that takes in oils from the skin to reduce the oily sheen. It can also absorb oils from the skincare product itself, resulting in a softer, less greasy product, normally with better spreadability and less tack.
TEA-Dextrin Octenylsuccinate
Est. %0.3
Function
Origin
TEA-Dextrin Octenylsuccinate
Sodium Chloride
Est. %0.3
Function
Origin
Sodium Chloride

You’re definitely familiar with sodium chloride, even if you don’t think you are. It’s table salt! Salt works well with some cleansing ingredients (surfactants) to thicken them into gels. It also acts as a stabilizer for water-in-oil emulsions.

Disteardimonium Hectorite
Est. %0.3
Function
Origin
Disteardimonium HectoriteA clay ingredient that functions primarily as a viscosity controlling agent that thickens all types of formulas. Disteardimonium hectorite imparts a smooth, velvety feel, making it a luxurious addition to any formula.
Magnesium Sulfate
Est. %0.3
Function
Origin
Magnesium SulfateA naturally occurring mineral that is commonly used in skincare products as a bulking agent. It helps to control the viscosity of products by making them thicker.
Phenoxyethanol
Est. %0.3
Function
Origin
PhenoxyethanolThe most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Ethylhexylglycerin
Est. %0.3
Function
Origin
EthylhexylglycerinA preservative booster derived from glycerin. It is commonly paired with other preservatives to improve their efficacy. Ethylhexylglycerin is also a humectant due to its chemical base of glycerin.
Octenidine HCl
Est. %0.3
Function
Origin
Octenidine HCl
Fragrance
Est. %0.3
Function
Origin
FragranceUnder trade secret law, manufacturers have the right not to disclose what exactly went into the fragrance and use the unspecific word Fragrance or Parfum instead. Many fragrances are highly allergenic.