Exuviance Daily Oil Control Primer & Finish | Review, Efficacy Ratings, Ingredient List Explained

Review

Results you may expect from using Exuviance Daily Oil Control Primer & Finish:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using Exuviance Daily Oil Control Primer & Finish:

Light moisturizing. It has a moisturizing rating of 3.9 out of 10.

How moisturizing is it?

Lightly moisturizing: Exuviance Daily Oil Control Primer & Finish has a moisturizing rating of 3.9 out of 10.

Is it more humectant or occlusive? Rather humectant. It has a low occlusivity of 2.5 out of 10 and a moderate humectancy of 5.3 out of 10, primarily due to the high content of Gluconolactone (est. ≈3.0%) and Glycerin (est. ≈2.0%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, Exuviance Daily Oil Control Primer & Finish has a zero anti-wrinkle rating.

It contains Gluconolactone, an ingredient marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of Gluconolactone provide insufficient evidence of its efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient does not generate the anti-wrinkle rating.

Moisturizers, when used regularly, are proven to prevent wrinkle formation and even reduce existing wrinkles. Therefore, this product, like any other moisturizer, could deliver some anti-wrinkle effects through its moisturizing action.

Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.

Antimicrobial
Fragrance
Preservative
Flavor
Formula helpers

Other

Est. % The Estimated % is our algorithm-based assumption about an ingredient's concentration in a formula. Learn more The Estimated % is our algorithm-based assumption about an ingredient's concentration in a formula. Learn more	Ingredient	Origin	Functions
75	Water The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients. Water The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.	Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water.	Formula helper Solvent – a liquid that dissolves other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients.
7.5	Cyclopentasiloxane A lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in. Cyclopentasiloxane A lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Solvent – a liquid that dissolves other ingredients. Formula helper Solvent – a liquid that dissolves other ingredients.
5	Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use. Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Antifoaming – reduces or prevents the formation of foam. Solvent – a liquid that dissolves other ingredients. Formula helper Antifoaming – reduces or prevents the formation of foam. Solvent – a liquid that dissolves other ingredients.
3	Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging. Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Formula helper Chelating – deactivates harmful heavy metal ions. Formula helper Chelating – deactivates harmful heavy metal ions.
2.5	Mandelic Acid Derived from almonds, this ingredient is one of the gentlest AHAs and is used for its exfoliating and antimicrobial properties. It is particularly beneficial for acne but also helps to treat post-inflammatory hyperpigmentation. Mandelic Acid Derived from almonds, this ingredient is one of the gentlest AHAs and is used for its exfoliating and antimicrobial properties. It is particularly beneficial for acne but also helps to treat post-inflammatory hyperpigmentation.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Anti-Pigmentation, Anti-pigmentation ingredients help to even skin tone by reducing the intensity of dark spots and hyperpigmentation. Anti-Pigmentation, Anti-pigmentation ingredients help to even skin tone by reducing the intensity of dark spots and hyperpigmentation. Antimicrobial Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial Antimicrobials prevent the growth of harmful microorganisms on the skin.
2	Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Denaturant – turns alcohol undrinkable. Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product. Formula helper Denaturant – turns alcohol undrinkable. Solvent – a liquid that dissolves other ingredients. Viscosity controlling – changes the thickness of a product.
1.5	Dimethicone Crosspolymer A group of ingredients that are typically added to skincare products to adjust the formula. Dimethicone Crosspolymers stabilize a formula, regulate its thickness and consistency and give the product a velvety feel. Dimethicone Crosspolymer A group of ingredients that are typically added to skincare products to adjust the formula. Dimethicone Crosspolymers stabilize a formula, regulate its thickness and consistency and give the product a velvety feel.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Formula helper Dispersing – ensures the even distribution of particles. Emulsion stabilizing – increases the stability of a formula. Viscosity controlling – changes the thickness of a product. Formula helper Dispersing – ensures the even distribution of particles. Emulsion stabilizing – increases the stability of a formula. Viscosity controlling – changes the thickness of a product.
1.3	Sodium Chloride You’re definitely familiar with sodium chloride, even if you don’t think you are. It’s table salt! Salt works well with some cleansing ingredients (surfactants) to thicken them into gels. It also acts as a stabilizer for water-in-oil emulsions. Sodium Chloride You’re definitely familiar with sodium chloride, even if you don’t think you are. It’s table salt! Salt works well with some cleansing ingredients (surfactants) to thicken them into gels. It also acts as a stabilizer for water-in-oil emulsions.	Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Formula helper Bulking – increases the volume of a product. Viscosity controlling – changes the thickness of a product. Formula helper Bulking – increases the volume of a product. Viscosity controlling – changes the thickness of a product.
1	PEG/PPG-18/18 Dimethicone A silicone-based emulsifier that has the ability to create non-sticky and non-greasy formulas. PEG/PPG-18/18 Dimethicone A silicone-based emulsifier that has the ability to create non-sticky and non-greasy formulas.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Formula helper Emulsifying – helps to mix water and oil together. Formula helper Emulsifying – helps to mix water and oil together.
0.3	Polysorbate 20 A viscous, amber-colored liquid that functions as a solubilizer to disperse small amounts of oil into a large water phase. Polysorbate 20 is frequently used to solubilize fragrance oils into water-based emulsions. Polysorbate 20 A viscous, amber-colored liquid that functions as a solubilizer to disperse small amounts of oil into a large water phase. Polysorbate 20 is frequently used to solubilize fragrance oils into water-based emulsions.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Formula helper Emulsifying – helps to mix water and oil together. Solubilizing – helps ingredients dissolve. Formula helper Emulsifying – helps to mix water and oil together. Solubilizing – helps ingredients dissolve.
0.3	Silica Silylate A synthetic powder that thickens oils and features a velvety texture. Silica Silylate A synthetic powder that thickens oils and features a velvety texture.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Formula helper Anticaking – prevents the formation of clumps. Antifoaming – reduces or prevents the formation of foam. Bulking – increases the volume of a product. Dispersing – ensures the even distribution of particles. Emulsion stabilizing – increases the stability of a formula. Viscosity controlling – changes the thickness of a product. Formula helper Anticaking – prevents the formation of clumps. Antifoaming – reduces or prevents the formation of foam. Bulking – increases the volume of a product. Dispersing – ensures the even distribution of particles. Emulsion stabilizing – increases the stability of a formula. Viscosity controlling – changes the thickness of a product.
0.3	Caprylyl Glycol An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer. Caprylyl Glycol An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Preservative Preservatives prevent the growth of bacteria and fungi in a product. Preservative Preservatives prevent the growth of bacteria and fungi in a product.
0.3	Ammonium Hydroxide A weakly basic ingredient that can adjust pH to a higher level. Ammonium Hydroxide A weakly basic ingredient that can adjust pH to a higher level.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Formula helper Denaturant – turns alcohol undrinkable. pH adjuster – alters the pH level of a formula. Formula helper Denaturant – turns alcohol undrinkable. pH adjuster – alters the pH level of a formula.
0.3	Phenoxyethanol The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless. Phenoxyethanol The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Preservative Preservatives prevent the growth of bacteria and fungi in a product. Preservative Preservatives prevent the growth of bacteria and fungi in a product.
0.3	Chlorphenesin A preservative and broad-spectrum antimicrobial agent that protects products from a wide range of bacteria and fungi. Chlorphenesin A preservative and broad-spectrum antimicrobial agent that protects products from a wide range of bacteria and fungi.	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.	Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Preservative Preservatives prevent the growth of bacteria and fungi in a product. Preservative Preservatives prevent the growth of bacteria and fungi in a product.

Water

Function:

Origin:

7.5

Cyclopentasiloxane

Function:

Origin:

Dimethicone

Function:

Origin:

Gluconolactone

Function:

Origin:

2.5

Mandelic Acid

Function:

Origin:

Glycerin

Function:

Origin:

1.5

Dimethicone Crosspolymer

Function:

Origin:

1.3

Sodium Chloride

Function:

Origin:

PEG/PPG-18/18 Dimethicone

Function:

Origin:

0.3

Polysorbate 20

Function:

Origin:

0.3

Silica Silylate

Function:

Origin:

0.3

Caprylyl Glycol

Function:

Origin:

0.3

Ammonium Hydroxide

Function:

Origin:

0.3

Phenoxyethanol

Function:

Origin:

0.3

Chlorphenesin

Function:

Origin:

Ratings

Gluconolactone

Glycerin

Caprylyl Glycol

0.3

Benchmark

Dimethicone

5.0

Benchmark

Moisturizing rating

3.9

Ingredient		Est. %	Benchmark Sciense based points to which we compare all humectants and all occlusives in a product to calculate its Humectancy and Occlusivity. Sciense based points to which we compare all humectants and all occlusives in a product to calculate its Humectancy and Occlusivity.	Raiting
Humectancy	All humectants	5.3	10	5.3
	Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging. Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.	3
	Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	2
	Caprylyl Glycol An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer. Caprylyl Glycol An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.	0.3
Occlusivity	All occlusives	5.0	20	2.5
	Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use. Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.	5.0
Moisturizing rating				3.9

Ingredient	Est. %	Benchmark According to various studies, a formula made up of 10% humectants will significantly increase skin hydration. Some studies also suggest that any further icrease in the consentration of humectants does not translate inty any more hydration and may even be dehydrating. To achieve maximum Humectancy, the product should have humectants with a total score of 10 and more. According to various studies, a formula made up of 10% humectants will significantly increase skin hydration. Some studies also suggest that any further icrease in the consentration of humectants does not translate inty any more hydration and may even be dehydrating. To achieve maximum Humectancy, the product should have humectants with a total score of 10 and more.	Humectancy
Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging. Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.	3
Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective. Glycerin The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.	2
Caprylyl Glycol An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer. Caprylyl Glycol An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.	0.3
All humectants	5.3	10	5.3

Gluconolactone

Glycerin

Caprylyl Glycol

0.3

Benchmark

Ingredient	Est. %	Benchmark The most occlusive product possible is 100% petrolatum (hello Vaseline Jelly). According to studies, hovewer, even 10% petrolatum can achieve almost the same mosturizing effect. The occlusive properties of petrolatum are at least twice as superior as other occlusive ingredients. This is why, in order to match the moisturizing efficacy of 10% petrolatum, a product needs to contain at least 20% of other occlusives. Our benchmark for maximum Occlusivity is 20 (and the petrolatum score is always doubled). The most occlusive product possible is 100% petrolatum (hello Vaseline Jelly). According to studies, hovewer, even 10% petrolatum can achieve almost the same mosturizing effect. The occlusive properties of petrolatum are at least twice as superior as other occlusive ingredients. This is why, in order to match the moisturizing efficacy of 10% petrolatum, a product needs to contain at least 20% of other occlusives. Our benchmark for maximum Occlusivity is 20 (and the petrolatum score is always doubled).	Occlusivity
Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use. Dimethicone The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.	5
All occlusives	5.0	20	2.5

Dimethicone

5.0

Benchmark

Ingredient	Ingredient anti-wrinkle power Shows on a scale of 0-10 how effective an ingredient is at reducing wrinkles. Both the Reported Efficacy of the ingredient and the Strength of Evidence are taken into account. Shows on a scale of 0-10 how effective an ingredient is at reducing wrinkles. Both the Reported Efficacy of the ingredient and the Strength of Evidence are taken into account.	when present at, %	in this formula est. %	Rating
Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging. Gluconolactone A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.	n/a This ingredient is marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of this ingredient provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient do not contribute to the anti-wrinkle rating. This ingredient is marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of this ingredient provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, this ingredient do not contribute to the anti-wrinkle rating.	-	3	-
Total				0

Gluconolactone

Ingredient anti-wrinkle power

n/a

when present at, %

in this formula, est. %

Anti-wrinkle rating

Ingredient	Est. %	Benchmark It differs from one antioxidant ingredient to another, but, on average, the research suggests that topically applied antioxidants are effective in consentrations of 3% or above. Any product with a total antioxidant score of 3 or more is considered to be reach in antioxidants. It differs from one antioxidant ingredient to another, but, on average, the research suggests that topically applied antioxidants are effective in consentrations of 3% or above. Any product with a total antioxidant score of 3 or more is considered to be reach in antioxidants.	Rich in Antioxidants
None
All antioxidants	0	3	No

None

Benchmark

Ingredient	Est. %	Benchmark The effective concentration of soothing ingredients varies, but we consider a product rich in soothing ingredients if their estimated concentration is equal to or higher than 5%. The effective concentration of soothing ingredients varies, but we consider a product rich in soothing ingredients if their estimated concentration is equal to or higher than 5%.	Rich in Soothing
None
All soothing	0	5	No

None

Benchmark

Ingredients explained

Water
Est. %	75
Function	Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water.

The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.

Cyclopentasiloxane
Est. %	7.5
Function	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A lightweight, fast-spreading emollient that leaves a very soft and silky after-feel on the skin. Supplied as a clear and colorless liquid, cyclopentasiloxane is often used as a solvent to dissolve other silicones in.

Dimethicone
Est. %	5
Function	Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Moisturizing (Occlusive), Occlusives are moisturizing ingredients that seal moisture into the skin, forming a water-resistant barrier. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Antifoaming, Antifoaming – reduces or prevents the formation of foam. Antifoaming, Antifoaming – reduces or prevents the formation of foam. Solvent Solvent – a liquid that dissolves other ingredients. Solvent Solvent – a liquid that dissolves other ingredients.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

The most common silicone in skincare. It forms a silky, smooth film on the skin’s surface and can help to prevent water loss. It also aids in wound healing and can treat and soften scars. Dimethicone is considered to be very safe for use.

Gluconolactone
Est. %	3
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Wrinkle, Anti-wrinkle ingredients prevent the formation or reduce the appearance of wrinkles. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Anti-Acne, Anti-acne agents treat acne blemishes, blackheads, and whiteheads. Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Chelating Chelating – deactivates harmful heavy metal ions. Chelating Chelating – deactivates harmful heavy metal ions.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.

Mandelic Acid
Est. %	2.5
Function	Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Exfoliant, Exfoliants remove dead skin cells from the surface of the skin via acid-based chemical reactions (e.g., AHA or BHA). Anti-Pigmentation, Anti-pigmentation ingredients help to even skin tone by reducing the intensity of dark spots and hyperpigmentation. Anti-Pigmentation, Anti-pigmentation ingredients help to even skin tone by reducing the intensity of dark spots and hyperpigmentation. Antimicrobial Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial Antimicrobials prevent the growth of harmful microorganisms on the skin.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

Derived from almonds, this ingredient is one of the gentlest AHAs and is used for its exfoliating and antimicrobial properties. It is particularly beneficial for acne but also helps to treat post-inflammatory hyperpigmentation.

Glycerin
Est. %	2
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Denaturant, Denaturant – turns alcohol undrinkable. Denaturant, Denaturant – turns alcohol undrinkable. Solvent, Solvent – a liquid that dissolves other ingredients. Solvent, Solvent – a liquid that dissolves other ingredients. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic, All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.) Animal Ingredients derived from animals (including birds, fish, crustaceans, mollusks, and insects) or produced by animals (e.g. dairy- and egg-derived ingredients, bee products, silk, pearls, etc.)

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Dimethicone Crosspolymer
Est. %	1.5
Function	Dispersing, Dispersing – ensures the even distribution of particles. Dispersing, Dispersing – ensures the even distribution of particles. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A group of ingredients that are typically added to skincare products to adjust the formula. Dimethicone Crosspolymers stabilize a formula, regulate its thickness and consistency and give the product a velvety feel.

Sodium Chloride
Est. %	1.3
Function	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Flavor, Flavor ingredients bring sweetness to a product or are used to recreate various tastes. Bulking, Bulking – increases the volume of a product. Bulking, Bulking – increases the volume of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Naturally occurring, These are ingredients initially present in nature, such as elements (Zinc, Gold, or Silver), minerals, or water. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

You’re definitely familiar with sodium chloride, even if you don’t think you are. It’s table salt! Salt works well with some cleansing ingredients (surfactants) to thicken them into gels. It also acts as a stabilizer for water-in-oil emulsions.

PEG/PPG-18/18 Dimethicone
Est. %	1
Function	Emulsifying Emulsifying – helps to mix water and oil together. Emulsifying Emulsifying – helps to mix water and oil together.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A silicone-based emulsifier that has the ability to create non-sticky and non-greasy formulas.

Polysorbate 20
Est. %	0.3
Function	Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Fragrance, Fragrance ingredients add scent to a product or hide ('mask') the undesired aroma of other ingredients. Emulsifying, Emulsifying – helps to mix water and oil together. Emulsifying, Emulsifying – helps to mix water and oil together. Solubilizing Solubilizing – helps ingredients dissolve. Solubilizing Solubilizing – helps ingredients dissolve.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A viscous, amber-colored liquid that functions as a solubilizer to disperse small amounts of oil into a large water phase. Polysorbate 20 is frequently used to solubilize fragrance oils into water-based emulsions.

Silica Silylate
Est. %	0.3
Function	Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Anticaking, Anticaking – prevents the formation of clumps. Anticaking, Anticaking – prevents the formation of clumps. Antifoaming, Antifoaming – reduces or prevents the formation of foam. Antifoaming, Antifoaming – reduces or prevents the formation of foam. Bulking, Bulking – increases the volume of a product. Bulking, Bulking – increases the volume of a product. Dispersing, Dispersing – ensures the even distribution of particles. Dispersing, Dispersing – ensures the even distribution of particles. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Emulsion Stabilizing, Emulsion stabilizing – increases the stability of a formula. Viscosity Controlling Viscosity controlling – changes the thickness of a product. Viscosity Controlling Viscosity controlling – changes the thickness of a product.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A synthetic powder that thickens oils and features a velvety texture.

Caprylyl Glycol
Est. %	0.3
Function	Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Moisturizing (Humectant), Humectants are moisturizing ingredients that draw moisture to the skin, either from deeper layers or from the environment (when it's humid). Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Emollient, Emollients fill the micro-cracks in the skin and leave it feeling soft and pleasant to the touch. Emollients are often mistakenly perceived as moisturizing ingredients. Preservative Preservatives prevent the growth of bacteria and fungi in a product. Preservative Preservatives prevent the growth of bacteria and fungi in a product.
Origin	Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Botanical, Ingredients derived from plants, mosses, and lichens: extracts, oils, powders, juices and other types of processed plant materials. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

An emollient that improves product spreadability and offers a silky feel on the skin. It also acts as a preservative booster that improves the efficacy of other preservatives. According to the manufacturer, it is also a humectant moisturizer.

Ammonium Hydroxide
Est. %	0.3
Function	Denaturant, Denaturant – turns alcohol undrinkable. Denaturant, Denaturant – turns alcohol undrinkable. pH Adjuster pH adjuster – alters the pH level of a formula. pH Adjuster pH adjuster – alters the pH level of a formula.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

A weakly basic ingredient that can adjust pH to a higher level.

Phenoxyethanol
Est. %	0.3
Function	Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Preservative Preservatives prevent the growth of bacteria and fungi in a product. Preservative Preservatives prevent the growth of bacteria and fungi in a product.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.

The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.

Chlorphenesin
Est. %	0.3
Function	Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Antimicrobial, Antimicrobials prevent the growth of harmful microorganisms on the skin. Preservative Preservatives prevent the growth of bacteria and fungi in a product. Preservative Preservatives prevent the growth of bacteria and fungi in a product.
Origin	Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure. Synthetic All kinds of ingredients formulated or produced by a chemical process, or those that have a chemical modification in their structure.