OLEHENRIKSEN Balancing Force Oil Control Toner

OLEHENRIKSEN Balancing Force Oil Control Toner
3.9
/ 10
Moisturizing
7.2 Humectancy icon Humectancy
0.6 Occlusivity icon Occlusivity
0.4Anti-wrinkle icon/ 10
Anti-wrinkle
$$$$

Review

Results you may expect from using OLEHENRIKSEN Balancing Force Oil Control Toner:

Based on the ingredient analysis by CreamScan, these are the key benefits you can expect from using OLEHENRIKSEN Balancing Force Oil Control Toner:

  • Light moisturizing. It has a moisturizing rating of 3.9 out of 10.
  • Little anti-wrinkle effect: OLEHENRIKSEN Balancing Force Oil Control Toner has an anti-wrinkle rating of 0.4 out of 10, so you may expect a positive, although insignificant, effect on wrinkles.

How moisturizing is it?

Lightly moisturizing: OLEHENRIKSEN Balancing Force Oil Control Toner has a moisturizing rating of 3.9 out of 10.

Is it more humectant or occlusive? Significantly more humectant. It has a low occlusivity of 0.6 out of 10 and a high humectancy of 7.2 out of 10, primarily due to the high content of Glycerin (est. ≈3.0%) and Gluconolactone (est. ≈2.0%).

Please refer to the Ratings section below for details of the moisturizing rating calculation.

Anti-wrinkle efficacy

According to CreamScan analysis, OLEHENRIKSEN Balancing Force Oil Control Toner has a minimal anti-wrinkle rating of 0.4 out of 10. It contains one ingredient with proven anti-wrinkle efficacy: Glycolic Acid (est. ≈1.5%),
 highly effective in peelings, yet with below-average anti-wrinkle efficacy when used in leave-on skincare products.
 
Among others, OLEHENRIKSEN Balancing Force Oil Control Toner also contains contains Gluconolactone and Camellia Sinensis Leaf Extract, two ingredients marketed as effective in reducing wrinkles. However, the studies supporting the anti-wrinkle claims of these ingredients provide insufficient evidence of efficacy according to CreamScan Research Evaluation Standards. Therefore, these ingredients do not contribute to the anti-wrinkle rating.
 
Please refer to the Ratings section below for details of the anti-wrinkle rating calculation.
 

Ingredients

Est. % Ingredient Origin Functions
75
6
4
3
2
1.5
1.3
1
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Est. %
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:
Function:
Origin:

Ratings

All humectants
7.2
3
2
1.3
0.3
0.3
0.3
Benchmark
10
All occlusives
1.2
0.3
0.3
0.3
0.3
Benchmark
20
Moisturizing rating
3.9
Ingredient Est. % Benchmark Raiting
Humectancy All humectants 7.2 10
7.2
3
2
1.3
0.3
0.3
0.3
Occlusivity All occlusives 1.2 20
0.6
0.3
0.3
0.3
0.3
Moisturizing rating
3.9
Ingredient Est. % Benchmark Humectancy
3
2
1.3
0.3
0.3
0.3
All humectants 7.2 10
7.2
All humectants
7.2
3
2
1.3
0.3
0.3
0.3
Benchmark
10
Ingredient Est. % Benchmark Occlusivity
0.3
0.3
0.3
0.3
All occlusives 1.2 20
0.6
All occlusives
1.2
0.3
0.3
0.3
0.3
Benchmark
20
Ingredient
Ingredient anti-wrinkle power
when present at, %
in this formula est. %
Rating
1.5 /10 5 1.5 0.4
n/a
- 2 -
n/a
- 0.3 -
Total
0.4
Glycolic Acid
0.4
Ingredient anti-wrinkle power
1.5 /10
when present at, %
5
in this formula, est. %
1.5
Gluconolactone
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
2
Camellia Sinensis Leaf Extract
-
Ingredient anti-wrinkle power
n/a
when present at, %
-
in this formula, est. %
0.3
Anti-wrinkle rating
0.4
Ingredient Est. % Benchmark
Rich in Antioxidants
0.3
0.3
0.3
All antioxidants 0.9 3 No
All antioxidants
0.9
Macrocystis Pyrifera (Kelp) Extract
0.3
Camellia Sinensis Leaf Extract
0.3
Tocopherol
0.3
Benchmark
3
Ingredient Est. % Benchmark
Rich in Soothing
4
0.3
0.3
All soothing 4.6 5 No
All soothing
4.6
4
0.3
0.3
Benchmark
5

Ingredients explained

Water
Est. %75
Function
Origin
The most used ingredient in skincare. Its concentration defines the product texture: rich creams may have about 50% of water while a light jelly about 90%. Water doesn’t moisturize the skin by itself and is used in skincare as a solvent for other ingredients.
Polysorbate 20
Est. %6
Function
Origin
A viscous, amber-colored liquid that functions as a solubilizer to disperse small amounts of oil into a large water phase. Polysorbate 20 is frequently used to solubilize fragrance oils into water-based emulsions.
Hamamelis Virginiana (Witch Hazel) Water
Est. %4
Function
Origin
A fragrant, astringent essential water obtained by steeping and distilling the twigs and leaves of the witch hazel plant. It leaves the skin feeling tight and refreshed after application and helps with the healing of small cuts on the skin.
Glycerin
Est. %3
Function
Origin

The most popular moisturizing ingredient in the world. It is a powerful humectant – cheap yet very effective.

Gluconolactone
Est. %2
Function
Origin
A PHA derived from glucose. It has exfoliating and humectant properties and acts as a penetration enhancer for other ingredients. It has also been shown to assist in the treatment of acne and the prevention of photoaging.
Glycolic Acid
Est. %1.5
Function
Origin

The second most used AHA (after lactic acid) known for its potent exfoliating and smoothing effects. It increases skin cell turnover, which is beneficial for treating acne. When used in peels, glycolic acid has confirmed anti-wrinkle efficacy, though it is less effective in leave-on products like creams and serums.

Lactic Acid
Est. %1.3
Function
Origin
The most popular AHA in skincare and less irritating than glycolic acid. It can be naturally found in sour milk. It is a humectant moisturizing, pH stabilizing, and gently exfoliating ingredient, able to soften dry, cracked, and peeling skin.
Oleth-20
Est. %1
Function
Origin
Description is coming soon
Salicylic Acid
Est. %0.3
Function
Origin
This effective peeling and anti-inflammatory BHA is used as an anti-acne agent and works by breaking down the junctions between dead skin cells. This results in the peeling of dead skin and the unclogging of pores.
Sodium Hydroxide
Est. %0.3
Function
Origin
An ingredient that is able to bring the pH of a product up, thereby making it less harsh on the skin.
Sodium Benzoate
Est. %0.3
Function
Origin
A preservative that usually works in combination with other preservatives. It has to be at low pH (<5.5) to be effective.
Menthyl Lactate
Est. %0.3
Function
Origin
A derivative of menthol that has the same fresh, cooling effect on the skin, but that is less sensitizing and doesn’t have the strong mint scent of menthol.
Eucalyptus Globulus Leaf Oil
Est. %0.3
Function
Origin
An essential oil extracted from the leaves of the Eucalyptus globulus, a tall, evergreen, Australian tree with waxy leaves. It mostly consists of cineole – which has potent antimicrobial and anti-inflammatory activity.
Mentha Piperita (Peppermint) Oil
Est. %0.3
Function
Origin
An essential oil distilled from peppermint leaves that is used as a fragrance and for its cooling effect on the skin. It contains up to 50% of menthol, which interacts with heat-sensitive nerve endings upon application to the skin, producing a cold sensation.
Melia Azadirachta Seed Oil
Est. %0.3
Function
Origin
Description is coming soon
Linoleic Acid
Est. %0.3
Function
Origin
A fatty acid isolated from various plant oils (notably evening primrose, safflower, grape seed, and sunflower oil). It is an occlusive moisturizer and emollient that doesn't leave an oily, sticky residue and is especially suitable for oily and acne-prone skin.
Macrocystis Pyrifera (Kelp) Extract
Est. %0.3
Function
Origin
An extract obtained from Giant kelp that is rich in gel-forming and thickening polysaccharides.
Eucalyptus Globulus Leaf Extract
Est. %0.3
Function
Origin
A fragrant extract obtained from the mature leaves of the Eucalyptus tree. It contains cineole, the main constituent of eucalyptus essential oil.
Chondrus Crispus Extract
Est. %0.3
Function
Origin
An extract from the species of red marine algae called Irish moss or carrageen moss. It is edible and widely used to produce carrageenan, a polysaccharide with humectant moisturizing and soothing properties.
Camellia Sinensis Leaf Extract
Est. %0.3
Function
Origin
An antioxidant green tea extract. In the deeper layers, it slows down the destruction of collagen, elastin, and hyaluronic acid – thus delaying the signs of aging. It also acts as an anti-acne, soothing, moisturizing, and emollient ingredient.
Linolenic Acid
Est. %0.3
Function
Origin
An essential polyunsaturated occlusive fatty acid isolated from various plant oils. It is necessary for the correct barrier function of the skin and moisturizes without leaving a sticky after-feel.
Phenoxyethanol
Est. %0.3
Function
Origin
The most frequently used preservative in skincare. It is a clear, oil-like liquid synthetic substance that protects products from harmful bacteria and yeast, whilst still leaving skin microflora unharmed. It is confirmed by research to be harmless.
Calcium Gluconate
Est. %0.3
Function
Origin
A white crystalline powder that can act as a humectant when dissolved into water. It is also a chelating agent.
Benzoic Acid
Est. %0.3
Function
Origin
A preservative effective against fungi, yeast, and some bacteria. It is commonly paired with phenoxyethanol to create a broad spectrum preservation system. Benzoic acid can also serve as a pH adjuster, fragrance, and bulking agent.
Tocopherol
Est. %0.3
Function
Origin
Simply another name for vitamin E. Tocopherol is a fantastic ingredient and especially beneficial for dry and inflamed skin. It has occlusive moisturizing, emollient, antioxidant, and photoprotective properties.
Limonene
Est. %0.3
Function
Origin
One of the most used fragrances in skincare products. It is produced from the peels of citrus fruits and has a fresh, pleasant, citrusy smell. People who are sensitive to citrus should try to avoid it, or at least do a patch test before using it.